Re: [PATCH v3 1/2] dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional

[Christian Marangi]

On Thu, Jan 26, 2023 at 12:17:56PM +0100, Krzysztof Kozlowski wrote:
> On 23/01/2023 20:34, Christian Marangi wrote:
> > The qcom-cpufreq-nvmem driver supports 2 kind of devices:
> > - pre-cpr that doesn't have power-domains and base everything on nvmem
> >   cells and multiple named microvolt bindings
> > - cpr-based that require power-domain in the cpu nodes and use various
> >   source to decide the correct voltage and freq
> > 
> > When the schema was introduced, it was wrongly set to always require these
> > binding but this is not the case for pre-cpr devices.
> > 
> > Make the power-domain optional and set them required only for qcs404
> > based devices.
> > 
> > While at it also make more clear what the opp-table supports by adding
> > ref to the opp-v2-kryo-cpu and opp-v2-qcom-level schema.
> > 
> > Fixes: ec24d1d55469 ("dt-bindings: opp: Convert qcom-nvmem-cpufreq to DT schema")
> > Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
> > ---
> > 
> > Changes v2:
> > - Reword commit description
> > - Fix condition order
> > - Add allOf
> > 
> >  .../bindings/cpufreq/qcom-cpufreq-nvmem.yaml  | 81 +++++++++++++------
> >  1 file changed, 56 insertions(+), 25 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
> > index 9c086eac6ca7..6f5e7904181f 100644
> > --- a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
> > +++ b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
> > @@ -17,6 +17,9 @@ description: |
> >    on the CPU OPP in use. The CPUFreq driver sets the CPR power domain level
> >    according to the required OPPs defined in the CPU OPP tables.
> >  
> > +  For old implementation efuses are parsed to select the correct opp table and
> > +  voltage and CPR is not supported/used.
> > +
> >  select:
> >    properties:
> >      compatible:
> > @@ -33,37 +36,65 @@ select:
> >    required:
> >      - compatible
> >  
> > -properties:
> > -  cpus:
> > -    type: object
> > -
> > -    patternProperties:
> > -      '^cpu@[0-9a-f]+$':
> > -        type: object
> > -
> > -        properties:
> > -          power-domains:
> > -            maxItems: 1
> > -
> > -          power-domain-names:
> > -            items:
> > -              - const: cpr
> > -
> > -        required:
> > -          - power-domains
> > -          - power-domain-names
> > -
> >  patternProperties:
> >    '^opp-table(-[a-z0-9]+)?$':
> > -    if:
> > +    allOf:
> > +      - if:
> > +          properties:
> > +            compatible:
> > +              const: operating-points-v2-kryo-cpu
> > +        then:
> > +          $ref: /schemas/opp/opp-v2-kryo-cpu.yaml#
> > +
> > +      - if:
> > +          properties:
> > +            compatible:
> > +              const: operating-points-v2-qcom-level
> > +        then:
> > +          $ref: /schemas/opp/opp-v2-qcom-level.yaml#
> 
> This entire part looks independent, please split it into separate patch
> with its own explanation. What I still miss here - why do you remove
> "required-opps" from required properties. It's not clear to me at all.
> 

Hi, the required-opps needs to be part of this patch since they are only
needed for genpd based devices.

I will split the additional if parts in another patch since they are not
related.

-- 
	Ansuel