Re: [PATCH] platform/chrome: cros_ec_typec: allow deferred probe of switch handles

From: Prashant Malani
Date: Mon Jan 23 2023 - 19:43:40 EST


On Mon, Jan 23, 2023 at 1:36 AM Victor Ding <victording@xxxxxxxxxxxx> wrote:
>
> `fwnode_typec_{retimer,mux,switch}_get()` could return `-EPROBE_DEFER`,
> which is called from `cros_typec_get_switch_handles`. When this happens,
> it does not indicate absence of switches; instead, it only hints that
> probing of switches should occur at a later time.
>
> Progagate `-EPROBE_DEFER` to upper layer logic so that they can re-try
> probing switches as a better time.
>
> Signed-off-by: Victor Ding <victording@xxxxxxxxxxxx>
> ---
>
> drivers/platform/chrome/cros_ec_typec.c | 30 +++++++++++++++++--------
> 1 file changed, 21 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/platform/chrome/cros_ec_typec.c b/drivers/platform/chrome/cros_ec_typec.c
> index 59de4ce01fab..f4b3fc788491 100644
> --- a/drivers/platform/chrome/cros_ec_typec.c
> +++ b/drivers/platform/chrome/cros_ec_typec.c
> @@ -145,31 +145,37 @@ static int cros_typec_get_switch_handles(struct cros_typec_port *port,
> struct fwnode_handle *fwnode,
> struct device *dev)
> {
> + int ret = 0;
> +
> port->mux = fwnode_typec_mux_get(fwnode, NULL);
> if (IS_ERR(port->mux)) {
> - dev_dbg(dev, "Mux handle not found.\n");
> + ret = PTR_ERR(port->mux);
> + dev_dbg(dev, "Mux handle not found: %d.\n", ret);
> goto mux_err;
> }
>
> port->retimer = fwnode_typec_retimer_get(fwnode);
> if (IS_ERR(port->retimer)) {
> - dev_dbg(dev, "Retimer handle not found.\n");
> + ret = PTR_ERR(port->retimer);
> + dev_dbg(dev, "Retimer handle not found: %d.\n", ret);
> goto retimer_sw_err;
> }
>
> port->ori_sw = fwnode_typec_switch_get(fwnode);
> if (IS_ERR(port->ori_sw)) {
> - dev_dbg(dev, "Orientation switch handle not found.\n");
> + ret = PTR_ERR(port->ori_sw);
> + dev_dbg(dev, "Orientation switch handle not found: %d\n", ret);
> goto ori_sw_err;
> }
>
> port->role_sw = fwnode_usb_role_switch_get(fwnode);
> if (IS_ERR(port->role_sw)) {
> - dev_dbg(dev, "USB role switch handle not found.\n");
> + ret = PTR_ERR(port->role_sw);
> + dev_dbg(dev, "USB role switch handle not found: %d\n", ret);
> goto role_sw_err;
> }
>
> - return 0;
> + return ret;
>
> role_sw_err:
> typec_switch_put(port->ori_sw);
> @@ -181,7 +187,7 @@ static int cros_typec_get_switch_handles(struct cros_typec_port *port,
> typec_mux_put(port->mux);
> port->mux = NULL;
> mux_err:
> - return -ENODEV;
> + return ret;
> }
>
> static int cros_typec_add_partner(struct cros_typec_data *typec, int port_num,
> @@ -423,9 +429,15 @@ static int cros_typec_init_ports(struct cros_typec_data *typec)
> }
>
> ret = cros_typec_get_switch_handles(cros_port, fwnode, dev);
> - if (ret)
> - dev_dbg(dev, "No switch control for port %d\n",
> - port_num);
> + switch (ret) {
> + case 0:
> + break;
> + case -EPROBE_DEFER:
> + dev_err(dev, "Deferring getting switch handles at port %d\n", port_num);
> + goto unregister_ports;
> + default:
> + dev_dbg(dev, "No switch control for port %d, err: %d\n", port_num, ret);
> + }

The switch statement seems a little clunky here. Instead, nest a couple
of ifs; it is shorter and easier to read IMO.

ret = cros_typec_get_switch_handles(cros_port, fwnode, dev);
if (ret) {
dev_err_probe(dev, ret, "No switch control for port: %d\n", port_num);
if (ret == -EPROBE_DEFER)
goto unregister_ports;
}

}
}
>
> ret = cros_typec_register_port_altmodes(typec, port_num);
> if (ret) {
> --
> 2.39.0.246.g2a6d74b583-goog
>