Re: [PATCH 2/2] arm64: dts: qcom: ipq8074: add QFPROM node

[Kathiravan Thirumoorthy]

On 1/22/2023 10:29 PM, Robert Marko wrote:
> On Sun, 22 Jan 2023 at 17:57, Kathiravan Thirumoorthy
> <quic_kathirav@xxxxxxxxxxx> wrote:
> > On 1/21/2023 4:53 PM, Robert Marko wrote:
> > > IPQ8074 has efuses like other Qualcomm SoC-s that are required for
> > > determining various HW quirks which will be required later for CPR etc,
> > > so lets add the QFPROM node for start.
> > >
> > > Individidual fuses will be added as they are required.
> > >
> > > Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
> > > ---
> > >    arch/arm64/boot/dts/qcom/ipq8074.dtsi | 7 +++++++
> > >    1 file changed, 7 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> > > index 8eba586065a3..f29491f647fe 100644
> > > --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> > > +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> > > @@ -301,6 +301,13 @@ mdio: mdio@90000 {
> > >                        status = "disabled";
> > >                };
> > >
> > > +             qfprom: efuse@a4000 {
> > > +                     compatible = "qcom,ipq8074-qfprom", "qcom,qfprom";
> > > +                     reg = <0x000a4000 0x1000>;
> >
> >   From the HW document, I see the overall size of this region is 0x2000,
> > any reason to stick with 0x1000?
> Like always, I dont have access to docs and 0x1000 is all I could find
> downstream
> being used.
>
> Any chance you can share the regions inside of QFPROM, it would be great to use
> the ECC corrected one if available.

Sorry, What do you refer by "ECC corrected" here?

Thanks, Kathiravan T.


> Regards,
> Robert
> > Thanks, Kathiravan T.
> >
> >
> > > +                     #address-cells = <1>;
> > > +                     #size-cells = <1>;
> > > +             };
> > > +
> > >                prng: rng@e3000 {
> > >                        compatible = "qcom,prng-ee";
> > >                        reg = <0x000e3000 0x1000>;