Re: [PATCH] tools/perf: Various spelling fixes

From: Ian Rogers
Date: Sat Jan 21 2023 - 14:26:33 EST


On Sat, Jan 21, 2023 at 10:47 AM Diederik de Haas <didi.debian@xxxxxxxxx> wrote:
>
> Fix various spelling errors as reported by Debian's lintian tool.
>
> "amount of times" -> "number of times"
> Condtional -> Conditional
> Instrcution -> Instruction
> Interal -> Internal
> adderted -> asserted
> casued -> caused
> cummulative -> cumulative
> exlusive -> exclusive
> occurance -> occurrence
> occured -> occurred
> occurences -> occurrences
> ocurrence -> occurrence
> onthe -> on the
> preceeding -> preceding
> reponses -> responses
> satisifed -> satisfied
> successfuly -> successfully
> transfered -> transferred
> transfering -> transferring
> upto -> up to
>
> Signed-off-by: Diederik de Haas <didi.debian@xxxxxxxxx>

Thanks Diederik,

The JSON files are generated from Intel information here:
https://github.com/intel/perfmon/
Fixing the spelling in the tree means that when we update the
incorrect spelling will be generated again. Intel are looking at the
matter, I've added Edward Baker to the e-mail. To make it clearer,
could you separate the JSON fixes from the tool fixes?

Could you also add the mistakes found by this list to:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/scripts/spelling.txt
which will mean the checkpatch.pl tool will flag the mistakes should
regressions happen.

Beside those 2 suggestions, the corrections look great and thank you
for taking the time to do this.
Ian

> ---
> tools/perf/Documentation/perf-bench.txt | 2 +-
> tools/perf/builtin-bench.c | 2 +-
> tools/perf/builtin-script.c | 2 +-
> .../arch/x86/alderlake/adl-metrics.json | 4 +-
> .../pmu-events/arch/x86/amdzen3/branch.json | 2 +-
> .../pmu-events/arch/x86/amdzen4/pipeline.json | 2 +-
> .../arch/x86/broadwell/pipeline.json | 2 +-
> .../arch/x86/broadwellde/pipeline.json | 2 +-
> .../arch/x86/broadwellde/uncore-cache.json | 48 ++++++------
> .../arch/x86/broadwellde/uncore-power.json | 2 +-
> .../arch/x86/broadwellx/pipeline.json | 2 +-
> .../arch/x86/broadwellx/uncore-cache.json | 24 +++---
> .../x86/broadwellx/uncore-interconnect.json | 16 ++--
> .../arch/x86/broadwellx/uncore-power.json | 2 +-
> .../arch/x86/cascadelakex/uncore-other.json | 4 +-
> .../arch/x86/cascadelakex/uncore-power.json | 2 +-
> .../arch/x86/jaketown/pipeline.json | 2 +-
> .../arch/x86/jaketown/uncore-cache.json | 22 +++---
> .../x86/jaketown/uncore-interconnect.json | 74 +++++++++----------
> .../arch/x86/jaketown/uncore-other.json | 20 ++---
> .../arch/x86/jaketown/uncore-power.json | 2 +-
> .../arch/x86/knightslanding/cache.json | 62 ++++++++--------
> .../arch/x86/knightslanding/pipeline.json | 8 +-
> .../arch/x86/knightslanding/uncore-other.json | 4 +-
> .../arch/x86/sandybridge/pipeline.json | 2 +-
> .../arch/x86/silvermont/frontend.json | 2 +-
> .../x86/westmereep-dp/virtual-memory.json | 2 +-
> tools/perf/util/evswitch.h | 4 +-
> 28 files changed, 161 insertions(+), 161 deletions(-)
>
> diff --git a/tools/perf/Documentation/perf-bench.txt b/tools/perf/Documentation/perf-bench.txt
> index a0529c7fa5ef..f04f0eaded98 100644
> --- a/tools/perf/Documentation/perf-bench.txt
> +++ b/tools/perf/Documentation/perf-bench.txt
> @@ -18,7 +18,7 @@ COMMON OPTIONS
> --------------
> -r::
> --repeat=::
> -Specify amount of times to repeat the run (default 10).
> +Specify number of times to repeat the run (default 10).
>
> -f::
> --format=::
> diff --git a/tools/perf/builtin-bench.c b/tools/perf/builtin-bench.c
> index 334ab897aae3..bd4fd94a2ce0 100644
> --- a/tools/perf/builtin-bench.c
> +++ b/tools/perf/builtin-bench.c
> @@ -150,7 +150,7 @@ unsigned int bench_repeat = 10; /* default number of times to repeat the run */
>
> static const struct option bench_options[] = {
> OPT_STRING('f', "format", &bench_format_str, "default|simple", "Specify the output formatting style"),
> - OPT_UINTEGER('r', "repeat", &bench_repeat, "Specify amount of times to repeat the run"),
> + OPT_UINTEGER('r', "repeat", &bench_repeat, "Specify number of times to repeat the run"),
> OPT_END()
> };
>
> diff --git a/tools/perf/builtin-script.c b/tools/perf/builtin-script.c
> index 69394ac0a20d..8901acdd7f5b 100644
> --- a/tools/perf/builtin-script.c
> +++ b/tools/perf/builtin-script.c
> @@ -1301,7 +1301,7 @@ static int perf_sample__fprintf_brstackinsn(struct perf_sample *sample,
> goto out;
>
> /*
> - * Print final block upto sample
> + * Print final block up to sample
> *
> * Due to pipeline delays the LBRs might be missing a branch
> * or two, which can result in very large or negative blocks
> diff --git a/tools/perf/pmu-events/arch/x86/alderlake/adl-metrics.json b/tools/perf/pmu-events/arch/x86/alderlake/adl-metrics.json
> index 2eb3d7464d9f..39e8b5e9bc29 100644
> --- a/tools/perf/pmu-events/arch/x86/alderlake/adl-metrics.json
> +++ b/tools/perf/pmu-events/arch/x86/alderlake/adl-metrics.json
> @@ -1830,13 +1830,13 @@
> "Unit": "cpu_atom"
> },
> {
> - "BriefDescription": "Instructions per Branch (lower number means higher occurance rate)",
> + "BriefDescription": "Instructions per Branch (lower number means higher occurrence rate)",
> "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.ALL_BRANCHES",
> "MetricName": "IpBranch",
> "Unit": "cpu_atom"
> },
> {
> - "BriefDescription": "Instruction per (near) call (lower number means higher occurance rate)",
> + "BriefDescription": "Instruction per (near) call (lower number means higher occurrence rate)",
> "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.CALL",
> "MetricName": "IpCall",
> "Unit": "cpu_atom"
> diff --git a/tools/perf/pmu-events/arch/x86/amdzen3/branch.json b/tools/perf/pmu-events/arch/x86/amdzen3/branch.json
> index 018a7fe94fb9..a3b53845ca19 100644
> --- a/tools/perf/pmu-events/arch/x86/amdzen3/branch.json
> +++ b/tools/perf/pmu-events/arch/x86/amdzen3/branch.json
> @@ -42,7 +42,7 @@
> {
> "EventName": "bp_l1_tlb_fetch_hit.if4k",
> "EventCode": "0x94",
> - "BriefDescription": "The number of instruction fetches that hit in the L1 ITLB. L1 Instrcution TLB hit (4K or 16K page size).",
> + "BriefDescription": "The number of instruction fetches that hit in the L1 ITLB. L1 Instruction TLB hit (4K or 16K page size).",
> "UMask": "0x01"
> },
> {
> diff --git a/tools/perf/pmu-events/arch/x86/amdzen4/pipeline.json b/tools/perf/pmu-events/arch/x86/amdzen4/pipeline.json
> index 4ae8316c7507..b9d368005d4d 100644
> --- a/tools/perf/pmu-events/arch/x86/amdzen4/pipeline.json
> +++ b/tools/perf/pmu-events/arch/x86/amdzen4/pipeline.json
> @@ -1,7 +1,7 @@
> [
> {
> "MetricName": "total_dispatch_slots",
> - "BriefDescription": "Total dispatch slots (upto 6 instructions can be dispatched in each cycle).",
> + "BriefDescription": "Total dispatch slots (up to 6 instructions can be dispatched in each cycle).",
> "MetricExpr": "6 * ls_not_halted_cyc"
> },
> {
> diff --git a/tools/perf/pmu-events/arch/x86/broadwell/pipeline.json b/tools/perf/pmu-events/arch/x86/broadwell/pipeline.json
> index 2f0fe6b35334..56e467ecbccf 100644
> --- a/tools/perf/pmu-events/arch/x86/broadwell/pipeline.json
> +++ b/tools/perf/pmu-events/arch/x86/broadwell/pipeline.json
> @@ -500,7 +500,7 @@
> "BriefDescription": "Stalls caused by changing prefix length of the instruction.",
> "EventCode": "0x87",
> "EventName": "ILD_STALL.LCP",
> - "PublicDescription": "This event counts stalls occured due to changing prefix length (66, 67 or REX.W when they change the length of the decoded instruction). Occurrences counting is proportional to the number of prefixes in a 16B-line. This may result in the following penalties: three-cycle penalty for each LCP in a 16-byte chunk.",
> + "PublicDescription": "This event counts stalls occurred due to changing prefix length (66, 67 or REX.W when they change the length of the decoded instruction). Occurrences counting is proportional to the number of prefixes in a 16B-line. This may result in the following penalties: three-cycle penalty for each LCP in a 16-byte chunk.",
> "SampleAfterValue": "2000003",
> "UMask": "0x1"
> },
> diff --git a/tools/perf/pmu-events/arch/x86/broadwellde/pipeline.json b/tools/perf/pmu-events/arch/x86/broadwellde/pipeline.json
> index 9e7d66b07f01..089dc5acee83 100644
> --- a/tools/perf/pmu-events/arch/x86/broadwellde/pipeline.json
> +++ b/tools/perf/pmu-events/arch/x86/broadwellde/pipeline.json
> @@ -500,7 +500,7 @@
> "BriefDescription": "Stalls caused by changing prefix length of the instruction.",
> "EventCode": "0x87",
> "EventName": "ILD_STALL.LCP",
> - "PublicDescription": "This event counts stalls occured due to changing prefix length (66, 67 or REX.W when they change the length of the decoded instruction). Occurrences counting is proportional to the number of prefixes in a 16B-line. This may result in the following penalties: three-cycle penalty for each LCP in a 16-byte chunk.",
> + "PublicDescription": "This event counts stalls occurred due to changing prefix length (66, 67 or REX.W when they change the length of the decoded instruction). Occurrences counting is proportional to the number of prefixes in a 16B-line. This may result in the following penalties: three-cycle penalty for each LCP in a 16-byte chunk.",
> "SampleAfterValue": "2000003",
> "UMask": "0x1"
> },
> diff --git a/tools/perf/pmu-events/arch/x86/broadwellde/uncore-cache.json b/tools/perf/pmu-events/arch/x86/broadwellde/uncore-cache.json
> index b8c9845308b2..906dd4fc4ecb 100644
> --- a/tools/perf/pmu-events/arch/x86/broadwellde/uncore-cache.json
> +++ b/tools/perf/pmu-events/arch/x86/broadwellde/uncore-cache.json
> @@ -968,7 +968,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.ALL",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions inserted into the TOR. This includes requests that reside in the TOR for a short time, such as LLC Hits that do not need to snoop cores or requests that get rejected and have to be retried through one of the ingress queues. The TOR is more commonly a bottleneck in skews with smaller core counts, where the ratio of RTIDs to TOR entries is larger. Note that there are reserved TOR entries for various request types, so it is possible that a given request type be blocked with an occupancy that is less than 20. Also note that generally requests will not be able to arbitrate into the TOR pipeline if there are no available TOR slots.",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions inserted into the TOR. This includes requests that reside in the TOR for a short time, such as LLC Hits that do not need to snoop cores or requests that get rejected and have to be retried through one of the ingress queues. The TOR is more commonly a bottleneck in skews with smaller core counts, where the ratio of RTIDs to TOR entries is larger. Note that there are reserved TOR entries for various request types, so it is possible that a given request type be blocked with an occupancy that is less than 20. Also note that generally requests will not be able to arbitrate into the TOR pipeline if there are no available TOR slots.",
> "UMask": "0x8",
> "Unit": "CBO"
> },
> @@ -977,7 +977,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.EVICTION",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Eviction transactions inserted into the TOR. Evictions can be quick, such as when the line is in the F, S, or E states and no core valid bits are set. They can also be longer if either CV bits are set (so the cores need to be snooped) and/or if there is a HitM (in which case it is necessary to write the request out to memory).",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Eviction transactions inserted into the TOR. Evictions can be quick, such as when the line is in the F, S, or E states and no core valid bits are set. They can also be longer if either CV bits are set (so the cores need to be snooped) and/or if there is a HitM (in which case it is necessary to write the request out to memory).",
> "UMask": "0x4",
> "Unit": "CBO"
> },
> @@ -986,7 +986,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.LOCAL",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions inserted into the TOR that are satisifed by locally HOMed memory.",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions inserted into the TOR that are satisfied by locally HOMed memory.",
> "UMask": "0x28",
> "Unit": "CBO"
> },
> @@ -995,7 +995,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.LOCAL_OPCODE",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions, satisifed by an opcode, inserted into the TOR that are satisifed by locally HOMed memory.",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions, satisfied by an opcode, inserted into the TOR that are satisfied by locally HOMed memory.",
> "UMask": "0x21",
> "Unit": "CBO"
> },
> @@ -1004,7 +1004,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.MISS_LOCAL",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that are satisifed by locally HOMed memory.",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that are satisfied by locally HOMed memory.",
> "UMask": "0x2a",
> "Unit": "CBO"
> },
> @@ -1013,7 +1013,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.MISS_LOCAL_OPCODE",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions, satisifed by an opcode, inserted into the TOR that are satisifed by locally HOMed memory.",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions, satisfied by an opcode, inserted into the TOR that are satisfied by locally HOMed memory.",
> "UMask": "0x23",
> "Unit": "CBO"
> },
> @@ -1022,7 +1022,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.MISS_OPCODE",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that match an opcode.",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that match an opcode.",
> "UMask": "0x3",
> "Unit": "CBO"
> },
> @@ -1031,7 +1031,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.MISS_REMOTE",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that are satisifed by remote caches or remote memory.",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that are satisfied by remote caches or remote memory.",
> "UMask": "0x8a",
> "Unit": "CBO"
> },
> @@ -1040,7 +1040,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.MISS_REMOTE_OPCODE",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions, satisifed by an opcode, inserted into the TOR that are satisifed by remote caches or remote memory.",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions, satisfied by an opcode, inserted into the TOR that are satisfied by remote caches or remote memory.",
> "UMask": "0x83",
> "Unit": "CBO"
> },
> @@ -1049,7 +1049,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.NID_ALL",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All NID matched (matches an RTID destination) transactions inserted into the TOR. The NID is programmed in Cn_MSR_PMON_BOX_FILTER.nid. In conjunction with STATE = I, it is possible to monitor misses to specific NIDs in the system.",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All NID matched (matches an RTID destination) transactions inserted into the TOR. The NID is programmed in Cn_MSR_PMON_BOX_FILTER.nid. In conjunction with STATE = I, it is possible to monitor misses to specific NIDs in the system.",
> "UMask": "0x48",
> "Unit": "CBO"
> },
> @@ -1058,7 +1058,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.NID_EVICTION",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; NID matched eviction transactions inserted into the TOR.",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; NID matched eviction transactions inserted into the TOR.",
> "UMask": "0x44",
> "Unit": "CBO"
> },
> @@ -1067,7 +1067,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.NID_MISS_ALL",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All NID matched miss requests that were inserted into the TOR.",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All NID matched miss requests that were inserted into the TOR.",
> "UMask": "0x4a",
> "Unit": "CBO"
> },
> @@ -1076,7 +1076,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.NID_MISS_OPCODE",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that match a NID and an opcode.",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that match a NID and an opcode.",
> "UMask": "0x43",
> "Unit": "CBO"
> },
> @@ -1085,7 +1085,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.NID_OPCODE",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Transactions inserted into the TOR that match a NID and an opcode.",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Transactions inserted into the TOR that match a NID and an opcode.",
> "UMask": "0x41",
> "Unit": "CBO"
> },
> @@ -1094,7 +1094,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.NID_WB",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; NID matched write transactions inserted into the TOR.",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; NID matched write transactions inserted into the TOR.",
> "UMask": "0x50",
> "Unit": "CBO"
> },
> @@ -1103,7 +1103,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.OPCODE",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Transactions inserted into the TOR that match an opcode (matched by Cn_MSR_PMON_BOX_FILTER.opc)",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Transactions inserted into the TOR that match an opcode (matched by Cn_MSR_PMON_BOX_FILTER.opc)",
> "UMask": "0x1",
> "Unit": "CBO"
> },
> @@ -1112,7 +1112,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.REMOTE",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions inserted into the TOR that are satisifed by remote caches or remote memory.",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions inserted into the TOR that are satisfied by remote caches or remote memory.",
> "UMask": "0x88",
> "Unit": "CBO"
> },
> @@ -1121,7 +1121,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.REMOTE_OPCODE",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions, satisifed by an opcode, inserted into the TOR that are satisifed by remote caches or remote memory.",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions, satisfied by an opcode, inserted into the TOR that are satisfied by remote caches or remote memory.",
> "UMask": "0x81",
> "Unit": "CBO"
> },
> @@ -1130,7 +1130,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.WB",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Write transactions inserted into the TOR. This does not include RFO, but actual operations that contain data being sent from the core.",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Write transactions inserted into the TOR. This does not include RFO, but actual operations that contain data being sent from the core.",
> "UMask": "0x10",
> "Unit": "CBO"
> },
> @@ -1166,7 +1166,7 @@
> "EventCode": "0x36",
> "EventName": "UNC_C_TOR_OCCUPANCY.LOCAL_OPCODE",
> "PerPkg": "1",
> - "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding transactions, satisifed by an opcode, in the TOR that are satisifed by locally HOMed memory.",
> + "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding transactions, satisfied by an opcode, in the TOR that are satisfied by locally HOMed memory.",
> "UMask": "0x21",
> "Unit": "CBO"
> },
> @@ -1193,7 +1193,7 @@
> "EventCode": "0x36",
> "EventName": "UNC_C_TOR_OCCUPANCY.MISS_LOCAL_OPCODE",
> "PerPkg": "1",
> - "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding Miss transactions, satisifed by an opcode, in the TOR that are satisifed by locally HOMed memory.",
> + "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding Miss transactions, satisfied by an opcode, in the TOR that are satisfied by locally HOMed memory.",
> "UMask": "0x23",
> "Unit": "CBO"
> },
> @@ -1220,7 +1220,7 @@
> "EventCode": "0x36",
> "EventName": "UNC_C_TOR_OCCUPANCY.MISS_REMOTE_OPCODE",
> "PerPkg": "1",
> - "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding Miss transactions, satisifed by an opcode, in the TOR that are satisifed by remote caches or remote memory.",
> + "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding Miss transactions, satisfied by an opcode, in the TOR that are satisfied by remote caches or remote memory.",
> "UMask": "0x83",
> "Unit": "CBO"
> },
> @@ -1301,7 +1301,7 @@
> "EventCode": "0x36",
> "EventName": "UNC_C_TOR_OCCUPANCY.REMOTE_OPCODE",
> "PerPkg": "1",
> - "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding transactions, satisifed by an opcode, in the TOR that are satisifed by remote caches or remote memory.",
> + "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding transactions, satisfied by an opcode, in the TOR that are satisfied by remote caches or remote memory.",
> "UMask": "0x81",
> "Unit": "CBO"
> },
> @@ -1388,7 +1388,7 @@
> "EventCode": "0x2",
> "EventName": "UNC_C_TxR_INSERTS.BL_CORE",
> "PerPkg": "1",
> - "PublicDescription": "Number of allocations into the Cbo Egress. The Egress is used to queue up requests destined for the ring.; Ring transactions from the Corebo destined for the BL ring. This is commonly used for transfering writeback data to the cache.",
> + "PublicDescription": "Number of allocations into the Cbo Egress. The Egress is used to queue up requests destined for the ring.; Ring transactions from the Corebo destined for the BL ring. This is commonly used for transferring writeback data to the cache.",
> "UMask": "0x40",
> "Unit": "CBO"
> },
> diff --git a/tools/perf/pmu-events/arch/x86/broadwellde/uncore-power.json b/tools/perf/pmu-events/arch/x86/broadwellde/uncore-power.json
> index 124b3fe2e0e1..9d3431b30158 100644
> --- a/tools/perf/pmu-events/arch/x86/broadwellde/uncore-power.json
> +++ b/tools/perf/pmu-events/arch/x86/broadwellde/uncore-power.json
> @@ -427,7 +427,7 @@
> "EventCode": "0x9",
> "EventName": "UNC_P_PROCHOT_INTERNAL_CYCLES",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of cycles that we are in Interal PROCHOT mode. This mode is triggered when a sensor on the die determines that we are too hot and must throttle to avoid damaging the chip.",
> + "PublicDescription": "Counts the number of cycles that we are in Internal PROCHOT mode. This mode is triggered when a sensor on the die determines that we are too hot and must throttle to avoid damaging the chip.",
> "Unit": "PCU"
> },
> {
> diff --git a/tools/perf/pmu-events/arch/x86/broadwellx/pipeline.json b/tools/perf/pmu-events/arch/x86/broadwellx/pipeline.json
> index 75233316640b..b08516adf789 100644
> --- a/tools/perf/pmu-events/arch/x86/broadwellx/pipeline.json
> +++ b/tools/perf/pmu-events/arch/x86/broadwellx/pipeline.json
> @@ -500,7 +500,7 @@
> "BriefDescription": "Stalls caused by changing prefix length of the instruction.",
> "EventCode": "0x87",
> "EventName": "ILD_STALL.LCP",
> - "PublicDescription": "This event counts stalls occured due to changing prefix length (66, 67 or REX.W when they change the length of the decoded instruction). Occurrences counting is proportional to the number of prefixes in a 16B-line. This may result in the following penalties: three-cycle penalty for each LCP in a 16-byte chunk.",
> + "PublicDescription": "This event counts stalls occurred due to changing prefix length (66, 67 or REX.W when they change the length of the decoded instruction). Occurrences counting is proportional to the number of prefixes in a 16B-line. This may result in the following penalties: three-cycle penalty for each LCP in a 16-byte chunk.",
> "SampleAfterValue": "2000003",
> "UMask": "0x1"
> },
> diff --git a/tools/perf/pmu-events/arch/x86/broadwellx/uncore-cache.json b/tools/perf/pmu-events/arch/x86/broadwellx/uncore-cache.json
> index 38eaac5afd4b..d9d96aacba5b 100644
> --- a/tools/perf/pmu-events/arch/x86/broadwellx/uncore-cache.json
> +++ b/tools/perf/pmu-events/arch/x86/broadwellx/uncore-cache.json
> @@ -1175,7 +1175,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.LOCAL",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions inserted into the TOR that are satisifed by locally HOMed memory.",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions inserted into the TOR that are satisfied by locally HOMed memory.",
> "UMask": "0x28",
> "Unit": "CBO"
> },
> @@ -1184,7 +1184,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.LOCAL_OPCODE",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions, satisifed by an opcode, inserted into the TOR that are satisifed by locally HOMed memory.",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions, satisfied by an opcode, inserted into the TOR that are satisfied by locally HOMed memory.",
> "UMask": "0x21",
> "Unit": "CBO"
> },
> @@ -1193,7 +1193,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.MISS_LOCAL",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that are satisifed by locally HOMed memory.",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that are satisfied by locally HOMed memory.",
> "UMask": "0x2a",
> "Unit": "CBO"
> },
> @@ -1202,7 +1202,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.MISS_LOCAL_OPCODE",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions, satisifed by an opcode, inserted into the TOR that are satisifed by locally HOMed memory.",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions, satisfied by an opcode, inserted into the TOR that are satisfied by locally HOMed memory.",
> "UMask": "0x23",
> "Unit": "CBO"
> },
> @@ -1220,7 +1220,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.MISS_REMOTE",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that are satisifed by remote caches or remote memory.",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that are satisfied by remote caches or remote memory.",
> "UMask": "0x8a",
> "Unit": "CBO"
> },
> @@ -1229,7 +1229,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.MISS_REMOTE_OPCODE",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions, satisifed by an opcode, inserted into the TOR that are satisifed by remote caches or remote memory.",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions, satisfied by an opcode, inserted into the TOR that are satisfied by remote caches or remote memory.",
> "UMask": "0x83",
> "Unit": "CBO"
> },
> @@ -1301,7 +1301,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.REMOTE",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions inserted into the TOR that are satisifed by remote caches or remote memory.",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions inserted into the TOR that are satisfied by remote caches or remote memory.",
> "UMask": "0x88",
> "Unit": "CBO"
> },
> @@ -1310,7 +1310,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.REMOTE_OPCODE",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions, satisifed by an opcode, inserted into the TOR that are satisifed by remote caches or remote memory.",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions, satisfied by an opcode, inserted into the TOR that are satisfied by remote caches or remote memory.",
> "UMask": "0x81",
> "Unit": "CBO"
> },
> @@ -1365,7 +1365,7 @@
> "EventCode": "0x36",
> "EventName": "UNC_C_TOR_OCCUPANCY.LOCAL_OPCODE",
> "PerPkg": "1",
> - "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding transactions, satisifed by an opcode, in the TOR that are satisifed by locally HOMed memory.",
> + "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding transactions, satisfied by an opcode, in the TOR that are satisfied by locally HOMed memory.",
> "UMask": "0x21",
> "Unit": "CBO"
> },
> @@ -1392,7 +1392,7 @@
> "EventCode": "0x36",
> "EventName": "UNC_C_TOR_OCCUPANCY.MISS_LOCAL_OPCODE",
> "PerPkg": "1",
> - "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding Miss transactions, satisifed by an opcode, in the TOR that are satisifed by locally HOMed memory.",
> + "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding Miss transactions, satisfied by an opcode, in the TOR that are satisfied by locally HOMed memory.",
> "UMask": "0x23",
> "Unit": "CBO"
> },
> @@ -1419,7 +1419,7 @@
> "EventCode": "0x36",
> "EventName": "UNC_C_TOR_OCCUPANCY.MISS_REMOTE_OPCODE",
> "PerPkg": "1",
> - "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding Miss transactions, satisifed by an opcode, in the TOR that are satisifed by remote caches or remote memory.",
> + "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding Miss transactions, satisfied by an opcode, in the TOR that are satisfied by remote caches or remote memory.",
> "UMask": "0x83",
> "Unit": "CBO"
> },
> @@ -1500,7 +1500,7 @@
> "EventCode": "0x36",
> "EventName": "UNC_C_TOR_OCCUPANCY.REMOTE_OPCODE",
> "PerPkg": "1",
> - "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding transactions, satisifed by an opcode, in the TOR that are satisifed by remote caches or remote memory.",
> + "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding transactions, satisfied by an opcode, in the TOR that are satisfied by remote caches or remote memory.",
> "UMask": "0x81",
> "Unit": "CBO"
> },
> diff --git a/tools/perf/pmu-events/arch/x86/broadwellx/uncore-interconnect.json b/tools/perf/pmu-events/arch/x86/broadwellx/uncore-interconnect.json
> index a5457c7ba58b..39218484278a 100644
> --- a/tools/perf/pmu-events/arch/x86/broadwellx/uncore-interconnect.json
> +++ b/tools/perf/pmu-events/arch/x86/broadwellx/uncore-interconnect.json
> @@ -38,7 +38,7 @@
> "EventCode": "0x13",
> "EventName": "UNC_Q_DIRECT2CORE.FAILURE_CREDITS",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on. There are 4 mutually exlusive filters. Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases. Note that this does not count packets that are not candidates for Direct2Core. The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn failed because there were not enough Egress credits. Had there been enough credits, the spawn would have worked as the RBT bit was set and the RBT tag matched.",
> + "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on. There are 4 mutually exclusive filters. Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases. Note that this does not count packets that are not candidates for Direct2Core. The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn failed because there were not enough Egress credits. Had there been enough credits, the spawn would have worked as the RBT bit was set and the RBT tag matched.",
> "UMask": "0x2",
> "Unit": "QPI LL"
> },
> @@ -47,7 +47,7 @@
> "EventCode": "0x13",
> "EventName": "UNC_Q_DIRECT2CORE.FAILURE_CREDITS_MISS",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on. There are 4 mutually exlusive filters. Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases. Note that this does not count packets that are not candidates for Direct2Core. The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn failed because the RBT tag did not match and there weren't enough Egress credits. The valid bit was set.",
> + "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on. There are 4 mutually exclusive filters. Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases. Note that this does not count packets that are not candidates for Direct2Core. The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn failed because the RBT tag did not match and there weren't enough Egress credits. The valid bit was set.",
> "UMask": "0x20",
> "Unit": "QPI LL"
> },
> @@ -56,7 +56,7 @@
> "EventCode": "0x13",
> "EventName": "UNC_Q_DIRECT2CORE.FAILURE_CREDITS_RBT",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on. There are 4 mutually exlusive filters. Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases. Note that this does not count packets that are not candidates for Direct2Core. The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn failed because there were not enough Egress credits AND the RBT bit was not set, but the RBT tag matched.",
> + "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on. There are 4 mutually exclusive filters. Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases. Note that this does not count packets that are not candidates for Direct2Core. The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn failed because there were not enough Egress credits AND the RBT bit was not set, but the RBT tag matched.",
> "UMask": "0x8",
> "Unit": "QPI LL"
> },
> @@ -65,7 +65,7 @@
> "EventCode": "0x13",
> "EventName": "UNC_Q_DIRECT2CORE.FAILURE_CREDITS_RBT_MISS",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on. There are 4 mutually exlusive filters. Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases. Note that this does not count packets that are not candidates for Direct2Core. The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn failed because the RBT tag did not match, the valid bit was not set and there weren't enough Egress credits.",
> + "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on. There are 4 mutually exclusive filters. Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases. Note that this does not count packets that are not candidates for Direct2Core. The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn failed because the RBT tag did not match, the valid bit was not set and there weren't enough Egress credits.",
> "UMask": "0x80",
> "Unit": "QPI LL"
> },
> @@ -74,7 +74,7 @@
> "EventCode": "0x13",
> "EventName": "UNC_Q_DIRECT2CORE.FAILURE_MISS",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on. There are 4 mutually exlusive filters. Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases. Note that this does not count packets that are not candidates for Direct2Core. The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn failed because the RBT tag did not match although the valid bit was set and there were enough Egress credits.",
> + "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on. There are 4 mutually exclusive filters. Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases. Note that this does not count packets that are not candidates for Direct2Core. The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn failed because the RBT tag did not match although the valid bit was set and there were enough Egress credits.",
> "UMask": "0x10",
> "Unit": "QPI LL"
> },
> @@ -83,7 +83,7 @@
> "EventCode": "0x13",
> "EventName": "UNC_Q_DIRECT2CORE.FAILURE_RBT_HIT",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on. There are 4 mutually exlusive filters. Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases. Note that this does not count packets that are not candidates for Direct2Core. The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn failed because the route-back table (RBT) specified that the transaction should not trigger a direct2core tranaction. This is common for IO transactions. There were enough Egress credits and the RBT tag matched but the valid bit was not set.",
> + "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on. There are 4 mutually exclusive filters. Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases. Note that this does not count packets that are not candidates for Direct2Core. The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn failed because the route-back table (RBT) specified that the transaction should not trigger a direct2core tranaction. This is common for IO transactions. There were enough Egress credits and the RBT tag matched but the valid bit was not set.",
> "UMask": "0x4",
> "Unit": "QPI LL"
> },
> @@ -92,7 +92,7 @@
> "EventCode": "0x13",
> "EventName": "UNC_Q_DIRECT2CORE.FAILURE_RBT_MISS",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on. There are 4 mutually exlusive filters. Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases. Note that this does not count packets that are not candidates for Direct2Core. The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn failed because the RBT tag did not match and the valid bit was not set although there were enough Egress credits.",
> + "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on. There are 4 mutually exclusive filters. Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases. Note that this does not count packets that are not candidates for Direct2Core. The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn failed because the RBT tag did not match and the valid bit was not set although there were enough Egress credits.",
> "UMask": "0x40",
> "Unit": "QPI LL"
> },
> @@ -101,7 +101,7 @@
> "EventCode": "0x13",
> "EventName": "UNC_Q_DIRECT2CORE.SUCCESS_RBT_HIT",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on. There are 4 mutually exlusive filters. Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases. Note that this does not count packets that are not candidates for Direct2Core. The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn was successful. There were sufficient credits, the RBT valid bit was set and there was an RBT tag match. The message was marked to spawn direct2core.",
> + "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on. There are 4 mutually exclusive filters. Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases. Note that this does not count packets that are not candidates for Direct2Core. The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn was successful. There were sufficient credits, the RBT valid bit was set and there was an RBT tag match. The message was marked to spawn direct2core.",
> "UMask": "0x1",
> "Unit": "QPI LL"
> },
> diff --git a/tools/perf/pmu-events/arch/x86/broadwellx/uncore-power.json b/tools/perf/pmu-events/arch/x86/broadwellx/uncore-power.json
> index e682eedf644a..4922cfca329e 100644
> --- a/tools/perf/pmu-events/arch/x86/broadwellx/uncore-power.json
> +++ b/tools/perf/pmu-events/arch/x86/broadwellx/uncore-power.json
> @@ -427,7 +427,7 @@
> "EventCode": "0x9",
> "EventName": "UNC_P_PROCHOT_INTERNAL_CYCLES",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of cycles that we are in Interal PROCHOT mode. This mode is triggered when a sensor on the die determines that we are too hot and must throttle to avoid damaging the chip.",
> + "PublicDescription": "Counts the number of cycles that we are in Internal PROCHOT mode. This mode is triggered when a sensor on the die determines that we are too hot and must throttle to avoid damaging the chip.",
> "Unit": "PCU"
> },
> {
> diff --git a/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-other.json b/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-other.json
> index ef4767feb4e2..65db3e00c2e2 100644
> --- a/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-other.json
> +++ b/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-other.json
> @@ -44,7 +44,7 @@
> "MetricName": "LLC_MISSES.PCIE_WRITE",
> "PerPkg": "1",
> "PortMask": "0x01",
> - "PublicDescription": "Counts every write request of 4 bytes of data made by IIO Part0 to a unit onthe main die (generally memory). In the general case, Part0 refers to a standard PCIe card of any size (x16,x8,x4) that is plugged directly into one of the PCIe slots. Part0 could also refer to any device plugged into the first slot of a PCIe riser card or to a device attached to the IIO unit which starts its use of the bus using lane 0 of the 16 lanes supported by the bus.",
> + "PublicDescription": "Counts every write request of 4 bytes of data made by IIO Part0 to a unit on the main die (generally memory). In the general case, Part0 refers to a standard PCIe card of any size (x16,x8,x4) that is plugged directly into one of the PCIe slots. Part0 could also refer to any device plugged into the first slot of a PCIe riser card or to a device attached to the IIO unit which starts its use of the bus using lane 0 of the 16 lanes supported by the bus.",
> "ScaleUnit": "4Bytes",
> "UMask": "0x1",
> "Unit": "IIO"
> @@ -11637,7 +11637,7 @@
> "FCMask": "0x07",
> "PerPkg": "1",
> "PortMask": "0x01",
> - "PublicDescription": "Counts every write request of 4 bytes of data made by IIO Part0 to a unit onthe main die (generally memory). In the general case, Part0 refers to a standard PCIe card of any size (x16,x8,x4) that is plugged directly into one of the PCIe slots. Part0 could also refer to any device plugged into the first slot of a PCIe riser card or to a device attached to the IIO unit which starts its use of the bus using lane 0 of the 16 lanes supported by the bus.",
> + "PublicDescription": "Counts every write request of 4 bytes of data made by IIO Part0 to a unit on the main die (generally memory). In the general case, Part0 refers to a standard PCIe card of any size (x16,x8,x4) that is plugged directly into one of the PCIe slots. Part0 could also refer to any device plugged into the first slot of a PCIe riser card or to a device attached to the IIO unit which starts its use of the bus using lane 0 of the 16 lanes supported by the bus.",
> "UMask": "0x1",
> "Unit": "IIO"
> },
> diff --git a/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-power.json b/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-power.json
> index 6835e14cd42c..8e21dc3eff16 100644
> --- a/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-power.json
> +++ b/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-power.json
> @@ -175,7 +175,7 @@
> "EventCode": "0x9",
> "EventName": "UNC_P_PROCHOT_INTERNAL_CYCLES",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of cycles that we are in Interal PROCHOT mode. This mode is triggered when a sensor on the die determines that we are too hot and must throttle to avoid damaging the chip.",
> + "PublicDescription": "Counts the number of cycles that we are in Internal PROCHOT mode. This mode is triggered when a sensor on the die determines that we are too hot and must throttle to avoid damaging the chip.",
> "Unit": "PCU"
> },
> {
> diff --git a/tools/perf/pmu-events/arch/x86/jaketown/pipeline.json b/tools/perf/pmu-events/arch/x86/jaketown/pipeline.json
> index 11d41ce8c922..85c04fe7632a 100644
> --- a/tools/perf/pmu-events/arch/x86/jaketown/pipeline.json
> +++ b/tools/perf/pmu-events/arch/x86/jaketown/pipeline.json
> @@ -501,7 +501,7 @@
> "BriefDescription": "Cases when loads get true Block-on-Store blocking code preventing store forwarding.",
> "EventCode": "0x03",
> "EventName": "LD_BLOCKS.STORE_FORWARD",
> - "PublicDescription": "This event counts loads that followed a store to the same address, where the data could not be forwarded inside the pipeline from the store to the load. The most common reason why store forwarding would be blocked is when a load's address range overlaps with a preceeding smaller uncompleted store. See the table of not supported store forwards in the Intel? 64 and IA-32 Architectures Optimization Reference Manual. The penalty for blocked store forwarding is that the load must wait for the store to complete before it can be issued.",
> + "PublicDescription": "This event counts loads that followed a store to the same address, where the data could not be forwarded inside the pipeline from the store to the load. The most common reason why store forwarding would be blocked is when a load's address range overlaps with a preceding smaller uncompleted store. See the table of not supported store forwards in the Intel? 64 and IA-32 Architectures Optimization Reference Manual. The penalty for blocked store forwarding is that the load must wait for the store to complete before it can be issued.",
> "SampleAfterValue": "100003",
> "UMask": "0x2"
> },
> diff --git a/tools/perf/pmu-events/arch/x86/jaketown/uncore-cache.json b/tools/perf/pmu-events/arch/x86/jaketown/uncore-cache.json
> index b9e68f9f33ea..47830ca5c682 100644
> --- a/tools/perf/pmu-events/arch/x86/jaketown/uncore-cache.json
> +++ b/tools/perf/pmu-events/arch/x86/jaketown/uncore-cache.json
> @@ -572,7 +572,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.EVICTION",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).",
> "UMask": "0x4",
> "Unit": "CBO"
> },
> @@ -581,7 +581,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.MISS_ALL",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).",
> "UMask": "0xa",
> "Unit": "CBO"
> },
> @@ -590,7 +590,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.MISS_OPCODE",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).",
> "UMask": "0x3",
> "Unit": "CBO"
> },
> @@ -599,7 +599,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.NID_ALL",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).",
> "UMask": "0x48",
> "Unit": "CBO"
> },
> @@ -608,7 +608,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.NID_EVICTION",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).",
> "UMask": "0x44",
> "Unit": "CBO"
> },
> @@ -617,7 +617,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.NID_MISS_ALL",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).",
> "UMask": "0x4a",
> "Unit": "CBO"
> },
> @@ -626,7 +626,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.NID_MISS_OPCODE",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).",
> "UMask": "0x43",
> "Unit": "CBO"
> },
> @@ -635,7 +635,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.NID_OPCODE",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).",
> "UMask": "0x41",
> "Unit": "CBO"
> },
> @@ -644,7 +644,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.NID_WB",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).",
> "UMask": "0x50",
> "Unit": "CBO"
> },
> @@ -653,7 +653,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.OPCODE",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).",
> "UMask": "0x1",
> "Unit": "CBO"
> },
> @@ -662,7 +662,7 @@
> "EventCode": "0x35",
> "EventName": "UNC_C_TOR_INSERTS.WB",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).",
> + "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select 'MISS_OPC_MATCH' and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).",
> "UMask": "0x10",
> "Unit": "CBO"
> },
> diff --git a/tools/perf/pmu-events/arch/x86/jaketown/uncore-interconnect.json b/tools/perf/pmu-events/arch/x86/jaketown/uncore-interconnect.json
> index 1c2cf94889a1..4a48bb22d556 100644
> --- a/tools/perf/pmu-events/arch/x86/jaketown/uncore-interconnect.json
> +++ b/tools/perf/pmu-events/arch/x86/jaketown/uncore-interconnect.json
> @@ -20,7 +20,7 @@
> "EventCode": "0x13",
> "EventName": "UNC_Q_DIRECT2CORE.FAILURE_CREDITS",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on. There are 4 mutually exlusive filters. Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases. Note that this does not count packets that are not candidates for Direct2Core. The only candidates for Direct2Core are DRS packets destined for Cbos.",
> + "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on. There are 4 mutually exclusive filters. Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases. Note that this does not count packets that are not candidates for Direct2Core. The only candidates for Direct2Core are DRS packets destined for Cbos.",
> "UMask": "0x2",
> "Unit": "QPI LL"
> },
> @@ -29,7 +29,7 @@
> "EventCode": "0x13",
> "EventName": "UNC_Q_DIRECT2CORE.FAILURE_CREDITS_RBT",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on. There are 4 mutually exlusive filters. Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases. Note that this does not count packets that are not candidates for Direct2Core. The only candidates for Direct2Core are DRS packets destined for Cbos.",
> + "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on. There are 4 mutually exclusive filters. Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases. Note that this does not count packets that are not candidates for Direct2Core. The only candidates for Direct2Core are DRS packets destined for Cbos.",
> "UMask": "0x8",
> "Unit": "QPI LL"
> },
> @@ -38,7 +38,7 @@
> "EventCode": "0x13",
> "EventName": "UNC_Q_DIRECT2CORE.FAILURE_RBT",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on. There are 4 mutually exlusive filters. Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases. Note that this does not count packets that are not candidates for Direct2Core. The only candidates for Direct2Core are DRS packets destined for Cbos.",
> + "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on. There are 4 mutually exclusive filters. Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases. Note that this does not count packets that are not candidates for Direct2Core. The only candidates for Direct2Core are DRS packets destined for Cbos.",
> "UMask": "0x4",
> "Unit": "QPI LL"
> },
> @@ -47,7 +47,7 @@
> "EventCode": "0x13",
> "EventName": "UNC_Q_DIRECT2CORE.SUCCESS",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on. There are 4 mutually exlusive filters. Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases. Note that this does not count packets that are not candidates for Direct2Core. The only candidates for Direct2Core are DRS packets destined for Cbos.",
> + "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on. There are 4 mutually exclusive filters. Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases. Note that this does not count packets that are not candidates for Direct2Core. The only candidates for Direct2Core are DRS packets destined for Cbos.",
> "UMask": "0x1",
> "Unit": "QPI LL"
> },
> @@ -80,7 +80,7 @@
> "EventCode": "0x9",
> "EventName": "UNC_Q_RxL_BYPASSED",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of times that an incoming flit was able to bypass the flit buffer and pass directly across the BGF and into the Egress. This is a latency optimization, and should generally be the common case. If this value is less than the number of flits transfered, it implies that there was queueing getting onto the ring, and thus the transactions saw higher latency.",
> + "PublicDescription": "Counts the number of times that an incoming flit was able to bypass the flit buffer and pass directly across the BGF and into the Egress. This is a latency optimization, and should generally be the common case. If this value is less than the number of flits transferred, it implies that there was queueing getting onto the ring, and thus the transactions saw higher latency.",
> "Unit": "QPI LL"
> },
> {
> @@ -176,7 +176,7 @@
> "EventCode": "0x1",
> "EventName": "UNC_Q_RxL_FLITS_G0.DATA",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits received from the QPI Link. It includes filters for Idle, protocol, and Data Flits. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time (for L0) or 4B instead of 8B for L0p.",
> + "PublicDescription": "Counts the number of flits received from the QPI Link. It includes filters for Idle, protocol, and Data Flits. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time (for L0) or 4B instead of 8B for L0p.",
> "UMask": "0x2",
> "Unit": "QPI LL"
> },
> @@ -185,7 +185,7 @@
> "EventCode": "0x1",
> "EventName": "UNC_Q_RxL_FLITS_G0.IDLE",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits received from the QPI Link. It includes filters for Idle, protocol, and Data Flits. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time (for L0) or 4B instead of 8B for L0p.",
> + "PublicDescription": "Counts the number of flits received from the QPI Link. It includes filters for Idle, protocol, and Data Flits. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time (for L0) or 4B instead of 8B for L0p.",
> "UMask": "0x1",
> "Unit": "QPI LL"
> },
> @@ -194,7 +194,7 @@
> "EventCode": "0x1",
> "EventName": "UNC_Q_RxL_FLITS_G0.NON_DATA",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits received from the QPI Link. It includes filters for Idle, protocol, and Data Flits. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time (for L0) or 4B instead of 8B for L0p.",
> + "PublicDescription": "Counts the number of flits received from the QPI Link. It includes filters for Idle, protocol, and Data Flits. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time (for L0) or 4B instead of 8B for L0p.",
> "UMask": "0x4",
> "Unit": "QPI LL"
> },
> @@ -203,7 +203,7 @@
> "EventCode": "0x2",
> "EventName": "UNC_Q_RxL_FLITS_G1.DRS",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> + "PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> "UMask": "0x18",
> "Unit": "QPI LL"
> },
> @@ -212,7 +212,7 @@
> "EventCode": "0x2",
> "EventName": "UNC_Q_RxL_FLITS_G1.DRS_DATA",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> + "PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> "UMask": "0x8",
> "Unit": "QPI LL"
> },
> @@ -221,7 +221,7 @@
> "EventCode": "0x2",
> "EventName": "UNC_Q_RxL_FLITS_G1.DRS_NONDATA",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> + "PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> "UMask": "0x10",
> "Unit": "QPI LL"
> },
> @@ -230,7 +230,7 @@
> "EventCode": "0x2",
> "EventName": "UNC_Q_RxL_FLITS_G1.HOM",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> + "PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> "UMask": "0x6",
> "Unit": "QPI LL"
> },
> @@ -239,7 +239,7 @@
> "EventCode": "0x2",
> "EventName": "UNC_Q_RxL_FLITS_G1.HOM_NONREQ",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> + "PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> "UMask": "0x4",
> "Unit": "QPI LL"
> },
> @@ -248,7 +248,7 @@
> "EventCode": "0x2",
> "EventName": "UNC_Q_RxL_FLITS_G1.HOM_REQ",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> + "PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> "UMask": "0x2",
> "Unit": "QPI LL"
> },
> @@ -257,7 +257,7 @@
> "EventCode": "0x2",
> "EventName": "UNC_Q_RxL_FLITS_G1.SNP",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> + "PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> "UMask": "0x1",
> "Unit": "QPI LL"
> },
> @@ -266,7 +266,7 @@
> "EventCode": "0x3",
> "EventName": "UNC_Q_RxL_FLITS_G2.NCB",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> + "PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> "UMask": "0xc",
> "Unit": "QPI LL"
> },
> @@ -275,7 +275,7 @@
> "EventCode": "0x3",
> "EventName": "UNC_Q_RxL_FLITS_G2.NCB_DATA",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> + "PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> "UMask": "0x4",
> "Unit": "QPI LL"
> },
> @@ -284,7 +284,7 @@
> "EventCode": "0x3",
> "EventName": "UNC_Q_RxL_FLITS_G2.NCB_NONDATA",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> + "PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> "UMask": "0x8",
> "Unit": "QPI LL"
> },
> @@ -293,7 +293,7 @@
> "EventCode": "0x3",
> "EventName": "UNC_Q_RxL_FLITS_G2.NCS",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> + "PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> "UMask": "0x10",
> "Unit": "QPI LL"
> },
> @@ -302,7 +302,7 @@
> "EventCode": "0x3",
> "EventName": "UNC_Q_RxL_FLITS_G2.NDR_AD",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> + "PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> "UMask": "0x1",
> "Unit": "QPI LL"
> },
> @@ -311,7 +311,7 @@
> "EventCode": "0x3",
> "EventName": "UNC_Q_RxL_FLITS_G2.NDR_AK",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> + "PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> "UMask": "0x2",
> "Unit": "QPI LL"
> },
> @@ -553,7 +553,7 @@
> "BriefDescription": "Flits Transferred - Group 0; Data Tx Flits",
> "EventName": "UNC_Q_TxL_FLITS_G0.DATA",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits transmitted across the QPI Link. It includes filters for Idle, protocol, and Data Flits. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time (for L0) or 4B instead of 8B for L0p.",
> + "PublicDescription": "Counts the number of flits transmitted across the QPI Link. It includes filters for Idle, protocol, and Data Flits. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time (for L0) or 4B instead of 8B for L0p.",
> "UMask": "0x2",
> "Unit": "QPI LL"
> },
> @@ -561,7 +561,7 @@
> "BriefDescription": "Flits Transferred - Group 0; Idle and Null Flits",
> "EventName": "UNC_Q_TxL_FLITS_G0.IDLE",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits transmitted across the QPI Link. It includes filters for Idle, protocol, and Data Flits. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time (for L0) or 4B instead of 8B for L0p.",
> + "PublicDescription": "Counts the number of flits transmitted across the QPI Link. It includes filters for Idle, protocol, and Data Flits. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time (for L0) or 4B instead of 8B for L0p.",
> "UMask": "0x1",
> "Unit": "QPI LL"
> },
> @@ -569,7 +569,7 @@
> "BriefDescription": "Flits Transferred - Group 0; Non-Data protocol Tx Flits",
> "EventName": "UNC_Q_TxL_FLITS_G0.NON_DATA",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits transmitted across the QPI Link. It includes filters for Idle, protocol, and Data Flits. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time (for L0) or 4B instead of 8B for L0p.",
> + "PublicDescription": "Counts the number of flits transmitted across the QPI Link. It includes filters for Idle, protocol, and Data Flits. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time (for L0) or 4B instead of 8B for L0p.",
> "UMask": "0x4",
> "Unit": "QPI LL"
> },
> @@ -577,7 +577,7 @@
> "BriefDescription": "Flits Transferred - Group 1; DRS Flits (both Header and Data)",
> "EventName": "UNC_Q_TxL_FLITS_G1.DRS",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits trasmitted across the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> + "PublicDescription": "Counts the number of flits trasmitted across the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> "UMask": "0x18",
> "Unit": "QPI LL"
> },
> @@ -585,7 +585,7 @@
> "BriefDescription": "Flits Transferred - Group 1; DRS Data Flits",
> "EventName": "UNC_Q_TxL_FLITS_G1.DRS_DATA",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits trasmitted across the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> + "PublicDescription": "Counts the number of flits trasmitted across the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> "UMask": "0x8",
> "Unit": "QPI LL"
> },
> @@ -593,7 +593,7 @@
> "BriefDescription": "Flits Transferred - Group 1; DRS Header Flits",
> "EventName": "UNC_Q_TxL_FLITS_G1.DRS_NONDATA",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits trasmitted across the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> + "PublicDescription": "Counts the number of flits trasmitted across the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> "UMask": "0x10",
> "Unit": "QPI LL"
> },
> @@ -601,7 +601,7 @@
> "BriefDescription": "Flits Transferred - Group 1; HOM Flits",
> "EventName": "UNC_Q_TxL_FLITS_G1.HOM",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits trasmitted across the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> + "PublicDescription": "Counts the number of flits trasmitted across the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> "UMask": "0x6",
> "Unit": "QPI LL"
> },
> @@ -609,7 +609,7 @@
> "BriefDescription": "Flits Transferred - Group 1; HOM Non-Request Flits",
> "EventName": "UNC_Q_TxL_FLITS_G1.HOM_NONREQ",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits trasmitted across the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> + "PublicDescription": "Counts the number of flits trasmitted across the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> "UMask": "0x4",
> "Unit": "QPI LL"
> },
> @@ -617,7 +617,7 @@
> "BriefDescription": "Flits Transferred - Group 1; HOM Request Flits",
> "EventName": "UNC_Q_TxL_FLITS_G1.HOM_REQ",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits trasmitted across the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> + "PublicDescription": "Counts the number of flits trasmitted across the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> "UMask": "0x2",
> "Unit": "QPI LL"
> },
> @@ -625,7 +625,7 @@
> "BriefDescription": "Flits Transferred - Group 1; SNP Flits",
> "EventName": "UNC_Q_TxL_FLITS_G1.SNP",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits trasmitted across the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> + "PublicDescription": "Counts the number of flits trasmitted across the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> "UMask": "0x1",
> "Unit": "QPI LL"
> },
> @@ -634,7 +634,7 @@
> "EventCode": "0x1",
> "EventName": "UNC_Q_TxL_FLITS_G2.NCB",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits trasmitted across the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> + "PublicDescription": "Counts the number of flits trasmitted across the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> "UMask": "0xc",
> "Unit": "QPI LL"
> },
> @@ -643,7 +643,7 @@
> "EventCode": "0x1",
> "EventName": "UNC_Q_TxL_FLITS_G2.NCB_DATA",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits trasmitted across the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> + "PublicDescription": "Counts the number of flits trasmitted across the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> "UMask": "0x4",
> "Unit": "QPI LL"
> },
> @@ -652,7 +652,7 @@
> "EventCode": "0x1",
> "EventName": "UNC_Q_TxL_FLITS_G2.NCB_NONDATA",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits trasmitted across the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> + "PublicDescription": "Counts the number of flits trasmitted across the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> "UMask": "0x8",
> "Unit": "QPI LL"
> },
> @@ -661,7 +661,7 @@
> "EventCode": "0x1",
> "EventName": "UNC_Q_TxL_FLITS_G2.NCS",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits trasmitted across the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> + "PublicDescription": "Counts the number of flits trasmitted across the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> "UMask": "0x10",
> "Unit": "QPI LL"
> },
> @@ -670,7 +670,7 @@
> "EventCode": "0x1",
> "EventName": "UNC_Q_TxL_FLITS_G2.NDR_AD",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits trasmitted across the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> + "PublicDescription": "Counts the number of flits trasmitted across the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> "UMask": "0x1",
> "Unit": "QPI LL"
> },
> @@ -679,7 +679,7 @@
> "EventCode": "0x1",
> "EventName": "UNC_Q_TxL_FLITS_G2.NDR_AK",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of flits trasmitted across the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> + "PublicDescription": "Counts the number of flits trasmitted across the QPI Link. This is one of three 'groups' that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each 'flit' is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four 'fits', each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI 'speed' (for example, 8.0 GT/s), the 'transfers' here refer to 'fits'. Therefore, in L0, the system will transfer 1 'flit' at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as 'data' bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual 'data' and an additional 16 bits of other information. To calculate 'data' bandwidth, one should therefore do: data flits * 8B / time.",
> "UMask": "0x2",
> "Unit": "QPI LL"
> },
> diff --git a/tools/perf/pmu-events/arch/x86/jaketown/uncore-other.json b/tools/perf/pmu-events/arch/x86/jaketown/uncore-other.json
> index 51a9a4e81046..1e472ac82285 100644
> --- a/tools/perf/pmu-events/arch/x86/jaketown/uncore-other.json
> +++ b/tools/perf/pmu-events/arch/x86/jaketown/uncore-other.json
> @@ -630,7 +630,7 @@
> "EventCode": "0x20",
> "EventName": "UNC_R3_IIO_CREDITS_ACQUIRED.DRS",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of times the NCS/NCB/DRS credit is acquried in the QPI for sending messages on BL to the IIO. There is one credit for each of these three message classes (three credits total). NCS is used for reads to PCIe space, NCB is used for transfering data without coherency, and DRS is used for transfering data with coherency (cachable PCI transactions). This event can only track one message class at a time.",
> + "PublicDescription": "Counts the number of times the NCS/NCB/DRS credit is acquried in the QPI for sending messages on BL to the IIO. There is one credit for each of these three message classes (three credits total). NCS is used for reads to PCIe space, NCB is used for transferring data without coherency, and DRS is used for transferring data with coherency (cachable PCI transactions). This event can only track one message class at a time.",
> "UMask": "0x8",
> "Unit": "R3QPI"
> },
> @@ -639,7 +639,7 @@
> "EventCode": "0x20",
> "EventName": "UNC_R3_IIO_CREDITS_ACQUIRED.NCB",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of times the NCS/NCB/DRS credit is acquried in the QPI for sending messages on BL to the IIO. There is one credit for each of these three message classes (three credits total). NCS is used for reads to PCIe space, NCB is used for transfering data without coherency, and DRS is used for transfering data with coherency (cachable PCI transactions). This event can only track one message class at a time.",
> + "PublicDescription": "Counts the number of times the NCS/NCB/DRS credit is acquried in the QPI for sending messages on BL to the IIO. There is one credit for each of these three message classes (three credits total). NCS is used for reads to PCIe space, NCB is used for transferring data without coherency, and DRS is used for transferring data with coherency (cachable PCI transactions). This event can only track one message class at a time.",
> "UMask": "0x10",
> "Unit": "R3QPI"
> },
> @@ -648,7 +648,7 @@
> "EventCode": "0x20",
> "EventName": "UNC_R3_IIO_CREDITS_ACQUIRED.NCS",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of times the NCS/NCB/DRS credit is acquried in the QPI for sending messages on BL to the IIO. There is one credit for each of these three message classes (three credits total). NCS is used for reads to PCIe space, NCB is used for transfering data without coherency, and DRS is used for transfering data with coherency (cachable PCI transactions). This event can only track one message class at a time.",
> + "PublicDescription": "Counts the number of times the NCS/NCB/DRS credit is acquried in the QPI for sending messages on BL to the IIO. There is one credit for each of these three message classes (three credits total). NCS is used for reads to PCIe space, NCB is used for transferring data without coherency, and DRS is used for transferring data with coherency (cachable PCI transactions). This event can only track one message class at a time.",
> "UMask": "0x20",
> "Unit": "R3QPI"
> },
> @@ -657,7 +657,7 @@
> "EventCode": "0x21",
> "EventName": "UNC_R3_IIO_CREDITS_REJECT.DRS",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of times that a request attempted to acquire an NCS/NCB/DRS credit in the QPI for sending messages on BL to the IIO but was rejected because no credit was available. There is one credit for each of these three message classes (three credits total). NCS is used for reads to PCIe space, NCB is used for transfering data without coherency, and DRS is used for transfering data with coherency (cachable PCI transactions). This event can only track one message class at a time.",
> + "PublicDescription": "Counts the number of times that a request attempted to acquire an NCS/NCB/DRS credit in the QPI for sending messages on BL to the IIO but was rejected because no credit was available. There is one credit for each of these three message classes (three credits total). NCS is used for reads to PCIe space, NCB is used for transferring data without coherency, and DRS is used for transferring data with coherency (cachable PCI transactions). This event can only track one message class at a time.",
> "UMask": "0x8",
> "Unit": "R3QPI"
> },
> @@ -666,7 +666,7 @@
> "EventCode": "0x21",
> "EventName": "UNC_R3_IIO_CREDITS_REJECT.NCB",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of times that a request attempted to acquire an NCS/NCB/DRS credit in the QPI for sending messages on BL to the IIO but was rejected because no credit was available. There is one credit for each of these three message classes (three credits total). NCS is used for reads to PCIe space, NCB is used for transfering data without coherency, and DRS is used for transfering data with coherency (cachable PCI transactions). This event can only track one message class at a time.",
> + "PublicDescription": "Counts the number of times that a request attempted to acquire an NCS/NCB/DRS credit in the QPI for sending messages on BL to the IIO but was rejected because no credit was available. There is one credit for each of these three message classes (three credits total). NCS is used for reads to PCIe space, NCB is used for transferring data without coherency, and DRS is used for transferring data with coherency (cachable PCI transactions). This event can only track one message class at a time.",
> "UMask": "0x10",
> "Unit": "R3QPI"
> },
> @@ -675,7 +675,7 @@
> "EventCode": "0x21",
> "EventName": "UNC_R3_IIO_CREDITS_REJECT.NCS",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of times that a request attempted to acquire an NCS/NCB/DRS credit in the QPI for sending messages on BL to the IIO but was rejected because no credit was available. There is one credit for each of these three message classes (three credits total). NCS is used for reads to PCIe space, NCB is used for transfering data without coherency, and DRS is used for transfering data with coherency (cachable PCI transactions). This event can only track one message class at a time.",
> + "PublicDescription": "Counts the number of times that a request attempted to acquire an NCS/NCB/DRS credit in the QPI for sending messages on BL to the IIO but was rejected because no credit was available. There is one credit for each of these three message classes (three credits total). NCS is used for reads to PCIe space, NCB is used for transferring data without coherency, and DRS is used for transferring data with coherency (cachable PCI transactions). This event can only track one message class at a time.",
> "UMask": "0x20",
> "Unit": "R3QPI"
> },
> @@ -684,7 +684,7 @@
> "EventCode": "0x22",
> "EventName": "UNC_R3_IIO_CREDITS_USED.DRS",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of cycles when the NCS/NCB/DRS credit is in use in the QPI for sending messages on BL to the IIO. There is one credit for each of these three message classes (three credits total). NCS is used for reads to PCIe space, NCB is used for transfering data without coherency, and DRS is used for transfering data with coherency (cachable PCI transactions). This event can only track one message class at a time.",
> + "PublicDescription": "Counts the number of cycles when the NCS/NCB/DRS credit is in use in the QPI for sending messages on BL to the IIO. There is one credit for each of these three message classes (three credits total). NCS is used for reads to PCIe space, NCB is used for transferring data without coherency, and DRS is used for transferring data with coherency (cachable PCI transactions). This event can only track one message class at a time.",
> "UMask": "0x8",
> "Unit": "R3QPI"
> },
> @@ -693,7 +693,7 @@
> "EventCode": "0x22",
> "EventName": "UNC_R3_IIO_CREDITS_USED.NCB",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of cycles when the NCS/NCB/DRS credit is in use in the QPI for sending messages on BL to the IIO. There is one credit for each of these three message classes (three credits total). NCS is used for reads to PCIe space, NCB is used for transfering data without coherency, and DRS is used for transfering data with coherency (cachable PCI transactions). This event can only track one message class at a time.",
> + "PublicDescription": "Counts the number of cycles when the NCS/NCB/DRS credit is in use in the QPI for sending messages on BL to the IIO. There is one credit for each of these three message classes (three credits total). NCS is used for reads to PCIe space, NCB is used for transferring data without coherency, and DRS is used for transferring data with coherency (cachable PCI transactions). This event can only track one message class at a time.",
> "UMask": "0x10",
> "Unit": "R3QPI"
> },
> @@ -702,7 +702,7 @@
> "EventCode": "0x22",
> "EventName": "UNC_R3_IIO_CREDITS_USED.NCS",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of cycles when the NCS/NCB/DRS credit is in use in the QPI for sending messages on BL to the IIO. There is one credit for each of these three message classes (three credits total). NCS is used for reads to PCIe space, NCB is used for transfering data without coherency, and DRS is used for transfering data with coherency (cachable PCI transactions). This event can only track one message class at a time.",
> + "PublicDescription": "Counts the number of cycles when the NCS/NCB/DRS credit is in use in the QPI for sending messages on BL to the IIO. There is one credit for each of these three message classes (three credits total). NCS is used for reads to PCIe space, NCB is used for transferring data without coherency, and DRS is used for transferring data with coherency (cachable PCI transactions). This event can only track one message class at a time.",
> "UMask": "0x20",
> "Unit": "R3QPI"
> },
> @@ -1107,7 +1107,7 @@
> "EventCode": "0x33",
> "EventName": "UNC_R3_VNA_CREDITS_ACQUIRED",
> "PerPkg": "1",
> - "PublicDescription": "Number of QPI VNA Credit acquisitions. This event can be used in conjunction with the VNA In-Use Accumulator to calculate the average lifetime of a credit holder. VNA credits are used by all message classes in order to communicate across QPI. If a packet is unable to acquire credits, it will then attempt to use credts from the VN0 pool. Note that a single packet may require multiple flit buffers (i.e. when data is being transfered). Therefore, this event will increment by the number of credits acquired in each cycle. Filtering based on message class is not provided. One can count the number of packets transfered in a given message class using an qfclk event.",
> + "PublicDescription": "Number of QPI VNA Credit acquisitions. This event can be used in conjunction with the VNA In-Use Accumulator to calculate the average lifetime of a credit holder. VNA credits are used by all message classes in order to communicate across QPI. If a packet is unable to acquire credits, it will then attempt to use credts from the VN0 pool. Note that a single packet may require multiple flit buffers (i.e. when data is being transferred). Therefore, this event will increment by the number of credits acquired in each cycle. Filtering based on message class is not provided. One can count the number of packets transferred in a given message class using an qfclk event.",
> "Unit": "R3QPI"
> },
> {
> diff --git a/tools/perf/pmu-events/arch/x86/jaketown/uncore-power.json b/tools/perf/pmu-events/arch/x86/jaketown/uncore-power.json
> index 638aa8a35cdb..a00f53978c3e 100644
> --- a/tools/perf/pmu-events/arch/x86/jaketown/uncore-power.json
> +++ b/tools/perf/pmu-events/arch/x86/jaketown/uncore-power.json
> @@ -266,7 +266,7 @@
> "EventCode": "0x9",
> "EventName": "UNC_P_PROCHOT_INTERNAL_CYCLES",
> "PerPkg": "1",
> - "PublicDescription": "Counts the number of cycles that we are in Interal PROCHOT mode. This mode is triggered when a sensor on the die determines that we are too hot and must throttle to avoid damaging the chip.",
> + "PublicDescription": "Counts the number of cycles that we are in Internal PROCHOT mode. This mode is triggered when a sensor on the die determines that we are too hot and must throttle to avoid damaging the chip.",
> "Unit": "PCU"
> },
> {
> diff --git a/tools/perf/pmu-events/arch/x86/knightslanding/cache.json b/tools/perf/pmu-events/arch/x86/knightslanding/cache.json
> index 01aea3d2832e..4568520e6d95 100644
> --- a/tools/perf/pmu-events/arch/x86/knightslanding/cache.json
> +++ b/tools/perf/pmu-events/arch/x86/knightslanding/cache.json
> @@ -6,7 +6,7 @@
> "SampleAfterValue": "200003"
> },
> {
> - "BriefDescription": "Counts the number of core cycles the fetch stalls because of an icache miss. This is a cummulative count of core cycles the fetch stalled for all icache misses.",
> + "BriefDescription": "Counts the number of core cycles the fetch stalls because of an icache miss. This is a cumulative count of core cycles the fetch stalled for all icache misses.",
> "EventCode": "0x86",
> "EventName": "FETCH_STALL.ICACHE_FILL_PENDING_CYCLES",
> "PublicDescription": "This event counts the number of core cycles the fetch stalls because of an icache miss. This is a cumulative count of cycles the NIP stalled for all icache misses.",
> @@ -108,7 +108,7 @@
> "UMask": "0x1"
> },
> {
> - "BriefDescription": "Counts Demand code reads and prefetch code read requests that accounts for reponses from snoop request hit with data forwarded from it Far(not in the same quadrant as the request)-other tile L2 in E/F/M state. Valid only in SNC4 Cluster mode.",
> + "BriefDescription": "Counts Demand code reads and prefetch code read requests that accounts for responses from snoop request hit with data forwarded from it Far(not in the same quadrant as the request)-other tile L2 in E/F/M state. Valid only in SNC4 Cluster mode.",
> "EventCode": "0xB7",
> "EventName": "OFFCORE_RESPONSE.ANY_CODE_RD.L2_HIT_FAR_TILE",
> "MSRIndex": "0x1a6,0x1a7",
> @@ -135,7 +135,7 @@
> "UMask": "0x1"
> },
> {
> - "BriefDescription": "Counts Demand code reads and prefetch code read requests that accounts for reponses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> + "BriefDescription": "Counts Demand code reads and prefetch code read requests that accounts for responses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> "EventCode": "0xB7",
> "EventName": "OFFCORE_RESPONSE.ANY_CODE_RD.L2_HIT_NEAR_TILE",
> "MSRIndex": "0x1a6,0x1a7",
> @@ -216,7 +216,7 @@
> "UMask": "0x1"
> },
> {
> - "BriefDescription": "Counts Demand cacheable data and L1 prefetch data read requests that accounts for reponses from snoop request hit with data forwarded from it Far(not in the same quadrant as the request)-other tile L2 in E/F/M state. Valid only in SNC4 Cluster mode.",
> + "BriefDescription": "Counts Demand cacheable data and L1 prefetch data read requests that accounts for responses from snoop request hit with data forwarded from it Far(not in the same quadrant as the request)-other tile L2 in E/F/M state. Valid only in SNC4 Cluster mode.",
> "EventCode": "0xB7",
> "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.L2_HIT_FAR_TILE",
> "MSRIndex": "0x1a6,0x1a7",
> @@ -243,7 +243,7 @@
> "UMask": "0x1"
> },
> {
> - "BriefDescription": "Counts Demand cacheable data and L1 prefetch data read requests that accounts for reponses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> + "BriefDescription": "Counts Demand cacheable data and L1 prefetch data read requests that accounts for responses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> "EventCode": "0xB7",
> "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.L2_HIT_NEAR_TILE",
> "MSRIndex": "0x1a6,0x1a7",
> @@ -324,7 +324,7 @@
> "UMask": "0x1"
> },
> {
> - "BriefDescription": "Counts any Prefetch requests that accounts for reponses from snoop request hit with data forwarded from it Far(not in the same quadrant as the request)-other tile L2 in E/F/M state. Valid only in SNC4 Cluster mode.",
> + "BriefDescription": "Counts any Prefetch requests that accounts for responses from snoop request hit with data forwarded from it Far(not in the same quadrant as the request)-other tile L2 in E/F/M state. Valid only in SNC4 Cluster mode.",
> "EventCode": "0xB7",
> "EventName": "OFFCORE_RESPONSE.ANY_PF_L2.L2_HIT_FAR_TILE",
> "MSRIndex": "0x1a6,0x1a7",
> @@ -351,7 +351,7 @@
> "UMask": "0x1"
> },
> {
> - "BriefDescription": "Counts any Prefetch requests that accounts for reponses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> + "BriefDescription": "Counts any Prefetch requests that accounts for responses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> "EventCode": "0xB7",
> "EventName": "OFFCORE_RESPONSE.ANY_PF_L2.L2_HIT_NEAR_TILE",
> "MSRIndex": "0x1a6,0x1a7",
> @@ -423,7 +423,7 @@
> "UMask": "0x1"
> },
> {
> - "BriefDescription": "Counts any Read request that accounts for reponses from snoop request hit with data forwarded from it Far(not in the same quadrant as the request)-other tile L2 in E/F/M state. Valid only in SNC4 Cluster mode.",
> + "BriefDescription": "Counts any Read request that accounts for responses from snoop request hit with data forwarded from it Far(not in the same quadrant as the request)-other tile L2 in E/F/M state. Valid only in SNC4 Cluster mode.",
> "EventCode": "0xB7",
> "EventName": "OFFCORE_RESPONSE.ANY_READ.L2_HIT_FAR_TILE",
> "MSRIndex": "0x1a6,0x1a7",
> @@ -450,7 +450,7 @@
> "UMask": "0x1"
> },
> {
> - "BriefDescription": "Counts any Read request that accounts for reponses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> + "BriefDescription": "Counts any Read request that accounts for responses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> "EventCode": "0xB7",
> "EventName": "OFFCORE_RESPONSE.ANY_READ.L2_HIT_NEAR_TILE",
> "MSRIndex": "0x1a6,0x1a7",
> @@ -531,7 +531,7 @@
> "UMask": "0x1"
> },
> {
> - "BriefDescription": "Counts any request that accounts for reponses from snoop request hit with data forwarded from it Far(not in the same quadrant as the request)-other tile L2 in E/F/M state. Valid only in SNC4 Cluster mode.",
> + "BriefDescription": "Counts any request that accounts for responses from snoop request hit with data forwarded from it Far(not in the same quadrant as the request)-other tile L2 in E/F/M state. Valid only in SNC4 Cluster mode.",
> "EventCode": "0xB7",
> "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.L2_HIT_FAR_TILE",
> "MSRIndex": "0x1a6,0x1a7",
> @@ -558,7 +558,7 @@
> "UMask": "0x1"
> },
> {
> - "BriefDescription": "Counts any request that accounts for reponses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> + "BriefDescription": "Counts any request that accounts for responses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> "EventCode": "0xB7",
> "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.L2_HIT_NEAR_TILE",
> "MSRIndex": "0x1a6,0x1a7",
> @@ -639,7 +639,7 @@
> "UMask": "0x1"
> },
> {
> - "BriefDescription": "Counts Demand cacheable data write requests that accounts for reponses from snoop request hit with data forwarded from it Far(not in the same quadrant as the request)-other tile L2 in E/F/M state. Valid only in SNC4 Cluster mode.",
> + "BriefDescription": "Counts Demand cacheable data write requests that accounts for responses from snoop request hit with data forwarded from it Far(not in the same quadrant as the request)-other tile L2 in E/F/M state. Valid only in SNC4 Cluster mode.",
> "EventCode": "0xB7",
> "EventName": "OFFCORE_RESPONSE.ANY_RFO.L2_HIT_FAR_TILE",
> "MSRIndex": "0x1a6,0x1a7",
> @@ -666,7 +666,7 @@
> "UMask": "0x1"
> },
> {
> - "BriefDescription": "Counts Demand cacheable data write requests that accounts for reponses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> + "BriefDescription": "Counts Demand cacheable data write requests that accounts for responses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> "EventCode": "0xB7",
> "EventName": "OFFCORE_RESPONSE.ANY_RFO.L2_HIT_NEAR_TILE",
> "MSRIndex": "0x1a6,0x1a7",
> @@ -747,7 +747,7 @@
> "UMask": "0x1"
> },
> {
> - "BriefDescription": "Counts Bus locks and split lock requests that accounts for reponses from snoop request hit with data forwarded from it Far(not in the same quadrant as the request)-other tile L2 in E/F/M state. Valid only in SNC4 Cluster mode.",
> + "BriefDescription": "Counts Bus locks and split lock requests that accounts for responses from snoop request hit with data forwarded from it Far(not in the same quadrant as the request)-other tile L2 in E/F/M state. Valid only in SNC4 Cluster mode.",
> "EventCode": "0xB7",
> "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.L2_HIT_FAR_TILE",
> "MSRIndex": "0x1a6,0x1a7",
> @@ -774,7 +774,7 @@
> "UMask": "0x1"
> },
> {
> - "BriefDescription": "Counts Bus locks and split lock requests that accounts for reponses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> + "BriefDescription": "Counts Bus locks and split lock requests that accounts for responses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> "EventCode": "0xB7",
> "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.L2_HIT_NEAR_TILE",
> "MSRIndex": "0x1a6,0x1a7",
> @@ -855,7 +855,7 @@
> "UMask": "0x1"
> },
> {
> - "BriefDescription": "Counts demand code reads and prefetch code reads that accounts for reponses from snoop request hit with data forwarded from it Far(not in the same quadrant as the request)-other tile L2 in E/F/M state. Valid only in SNC4 Cluster mode.",
> + "BriefDescription": "Counts demand code reads and prefetch code reads that accounts for responses from snoop request hit with data forwarded from it Far(not in the same quadrant as the request)-other tile L2 in E/F/M state. Valid only in SNC4 Cluster mode.",
> "EventCode": "0xB7",
> "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L2_HIT_FAR_TILE",
> "MSRIndex": "0x1a6,0x1a7",
> @@ -882,7 +882,7 @@
> "UMask": "0x1"
> },
> {
> - "BriefDescription": "Counts demand code reads and prefetch code reads that accounts for reponses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> + "BriefDescription": "Counts demand code reads and prefetch code reads that accounts for responses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> "EventCode": "0xB7",
> "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L2_HIT_NEAR_TILE",
> "MSRIndex": "0x1a6,0x1a7",
> @@ -1053,7 +1053,7 @@
> "UMask": "0x1"
> },
> {
> - "BriefDescription": "Counts Demand cacheable data writes that accounts for reponses from snoop request hit with data forwarded from it Far(not in the same quadrant as the request)-other tile L2 in E/F/M state. Valid only in SNC4 Cluster mode.",
> + "BriefDescription": "Counts Demand cacheable data writes that accounts for responses from snoop request hit with data forwarded from it Far(not in the same quadrant as the request)-other tile L2 in E/F/M state. Valid only in SNC4 Cluster mode.",
> "EventCode": "0xB7",
> "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L2_HIT_FAR_TILE",
> "MSRIndex": "0x1a6,0x1a7",
> @@ -1080,7 +1080,7 @@
> "UMask": "0x1"
> },
> {
> - "BriefDescription": "Counts Demand cacheable data writes that accounts for reponses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> + "BriefDescription": "Counts Demand cacheable data writes that accounts for responses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> "EventCode": "0xB7",
> "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L2_HIT_NEAR_TILE",
> "MSRIndex": "0x1a6,0x1a7",
> @@ -1170,7 +1170,7 @@
> "UMask": "0x1"
> },
> {
> - "BriefDescription": "Counts Partial reads (UC or WC and is valid only for Outstanding response type). that accounts for reponses from snoop request hit with data forwarded from it Far(not in the same quadrant as the request)-other tile L2 in E/F/M state. Valid only in SNC4 Cluster mode.",
> + "BriefDescription": "Counts Partial reads (UC or WC and is valid only for Outstanding response type). that accounts for responses from snoop request hit with data forwarded from it Far(not in the same quadrant as the request)-other tile L2 in E/F/M state. Valid only in SNC4 Cluster mode.",
> "EventCode": "0xB7",
> "EventName": "OFFCORE_RESPONSE.PARTIAL_READS.L2_HIT_FAR_TILE",
> "MSRIndex": "0x1a6,0x1a7",
> @@ -1197,7 +1197,7 @@
> "UMask": "0x1"
> },
> {
> - "BriefDescription": "Counts Partial reads (UC or WC and is valid only for Outstanding response type). that accounts for reponses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> + "BriefDescription": "Counts Partial reads (UC or WC and is valid only for Outstanding response type). that accounts for responses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> "EventCode": "0xB7",
> "EventName": "OFFCORE_RESPONSE.PARTIAL_READS.L2_HIT_NEAR_TILE",
> "MSRIndex": "0x1a6,0x1a7",
> @@ -1287,7 +1287,7 @@
> "UMask": "0x1"
> },
> {
> - "BriefDescription": "Counts Partial writes (UC or WT or WP and should be programmed on PMC1) that accounts for reponses from snoop request hit with data forwarded from it Far(not in the same quadrant as the request)-other tile L2 in E/F/M state. Valid only in SNC4 Cluster mode.",
> + "BriefDescription": "Counts Partial writes (UC or WT or WP and should be programmed on PMC1) that accounts for responses from snoop request hit with data forwarded from it Far(not in the same quadrant as the request)-other tile L2 in E/F/M state. Valid only in SNC4 Cluster mode.",
> "EventCode": "0xB7",
> "EventName": "OFFCORE_RESPONSE.PARTIAL_WRITES.L2_HIT_FAR_TILE",
> "MSRIndex": "0x1a7",
> @@ -1314,7 +1314,7 @@
> "UMask": "0x1"
> },
> {
> - "BriefDescription": "Counts Partial writes (UC or WT or WP and should be programmed on PMC1) that accounts for reponses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> + "BriefDescription": "Counts Partial writes (UC or WT or WP and should be programmed on PMC1) that accounts for responses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> "EventCode": "0xB7",
> "EventName": "OFFCORE_RESPONSE.PARTIAL_WRITES.L2_HIT_NEAR_TILE",
> "MSRIndex": "0x1a7",
> @@ -1386,7 +1386,7 @@
> "UMask": "0x1"
> },
> {
> - "BriefDescription": "Counts L1 data HW prefetches that accounts for reponses from snoop request hit with data forwarded from it Far(not in the same quadrant as the request)-other tile L2 in E/F/M state. Valid only in SNC4 Cluster mode.",
> + "BriefDescription": "Counts L1 data HW prefetches that accounts for responses from snoop request hit with data forwarded from it Far(not in the same quadrant as the request)-other tile L2 in E/F/M state. Valid only in SNC4 Cluster mode.",
> "EventCode": "0xB7",
> "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.L2_HIT_FAR_TILE",
> "MSRIndex": "0x1a6,0x1a7",
> @@ -1413,7 +1413,7 @@
> "UMask": "0x1"
> },
> {
> - "BriefDescription": "Counts L1 data HW prefetches that accounts for reponses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> + "BriefDescription": "Counts L1 data HW prefetches that accounts for responses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> "EventCode": "0xB7",
> "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.L2_HIT_NEAR_TILE",
> "MSRIndex": "0x1a6,0x1a7",
> @@ -1494,7 +1494,7 @@
> "UMask": "0x1"
> },
> {
> - "BriefDescription": "Counts L2 code HW prefetches that accounts for reponses from snoop request hit with data forwarded from it Far(not in the same quadrant as the request)-other tile L2 in E/F/M state. Valid only in SNC4 Cluster mode.",
> + "BriefDescription": "Counts L2 code HW prefetches that accounts for responses from snoop request hit with data forwarded from it Far(not in the same quadrant as the request)-other tile L2 in E/F/M state. Valid only in SNC4 Cluster mode.",
> "EventCode": "0xB7",
> "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L2_HIT_FAR_TILE",
> "MSRIndex": "0x1a6,0x1a7",
> @@ -1521,7 +1521,7 @@
> "UMask": "0x1"
> },
> {
> - "BriefDescription": "Counts L2 code HW prefetches that accounts for reponses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> + "BriefDescription": "Counts L2 code HW prefetches that accounts for responses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> "EventCode": "0xB7",
> "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L2_HIT_NEAR_TILE",
> "MSRIndex": "0x1a6,0x1a7",
> @@ -1602,7 +1602,7 @@
> "UMask": "0x1"
> },
> {
> - "BriefDescription": "Counts L2 data RFO prefetches (includes PREFETCHW instruction) that accounts for reponses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> + "BriefDescription": "Counts L2 data RFO prefetches (includes PREFETCHW instruction) that accounts for responses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> "EventCode": "0xB7",
> "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L2_HIT_NEAR_TILE",
> "MSRIndex": "0x1a6,0x1a7",
> @@ -1683,7 +1683,7 @@
> "UMask": "0x1"
> },
> {
> - "BriefDescription": "Counts Software Prefetches that accounts for reponses from snoop request hit with data forwarded from it Far(not in the same quadrant as the request)-other tile L2 in E/F/M state. Valid only in SNC4 Cluster mode.",
> + "BriefDescription": "Counts Software Prefetches that accounts for responses from snoop request hit with data forwarded from it Far(not in the same quadrant as the request)-other tile L2 in E/F/M state. Valid only in SNC4 Cluster mode.",
> "EventCode": "0xB7",
> "EventName": "OFFCORE_RESPONSE.PF_SOFTWARE.L2_HIT_FAR_TILE",
> "MSRIndex": "0x1a6,0x1a7",
> @@ -1710,7 +1710,7 @@
> "UMask": "0x1"
> },
> {
> - "BriefDescription": "Counts Software Prefetches that accounts for reponses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> + "BriefDescription": "Counts Software Prefetches that accounts for responses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> "EventCode": "0xB7",
> "EventName": "OFFCORE_RESPONSE.PF_SOFTWARE.L2_HIT_NEAR_TILE",
> "MSRIndex": "0x1a6,0x1a7",
> @@ -1818,7 +1818,7 @@
> "UMask": "0x1"
> },
> {
> - "BriefDescription": "Counts UC code reads (valid only for Outstanding response type) that accounts for reponses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> + "BriefDescription": "Counts UC code reads (valid only for Outstanding response type) that accounts for responses from snoop request hit with data forwarded from its Near-other tile L2 in E/F/M state",
> "EventCode": "0xB7",
> "EventName": "OFFCORE_RESPONSE.UC_CODE_READS.L2_HIT_NEAR_TILE",
> "MSRIndex": "0x1a6,0x1a7",
> diff --git a/tools/perf/pmu-events/arch/x86/knightslanding/pipeline.json b/tools/perf/pmu-events/arch/x86/knightslanding/pipeline.json
> index 1b803fa38641..3dc532107ead 100644
> --- a/tools/perf/pmu-events/arch/x86/knightslanding/pipeline.json
> +++ b/tools/perf/pmu-events/arch/x86/knightslanding/pipeline.json
> @@ -254,14 +254,14 @@
> "UMask": "0x80"
> },
> {
> - "BriefDescription": "Counts the number of occurences a retired load gets blocked because its address overlaps with a store whose data is not ready",
> + "BriefDescription": "Counts the number of occurrences a retired load gets blocked because its address overlaps with a store whose data is not ready",
> "EventCode": "0x03",
> "EventName": "RECYCLEQ.LD_BLOCK_STD_NOTREADY",
> "SampleAfterValue": "200003",
> "UMask": "0x2"
> },
> {
> - "BriefDescription": "Counts the number of occurences a retired load gets blocked because its address partially overlaps with a store",
> + "BriefDescription": "Counts the number of occurrences a retired load gets blocked because its address partially overlaps with a store",
> "Data_LA": "1",
> "EventCode": "0x03",
> "EventName": "RECYCLEQ.LD_BLOCK_ST_FORWARD",
> @@ -270,7 +270,7 @@
> "UMask": "0x1"
> },
> {
> - "BriefDescription": "Counts the number of occurences a retired load that is a cache line split. Each split should be counted only once.",
> + "BriefDescription": "Counts the number of occurrences a retired load that is a cache line split. Each split should be counted only once.",
> "Data_LA": "1",
> "EventCode": "0x03",
> "EventName": "RECYCLEQ.LD_SPLITS",
> @@ -293,7 +293,7 @@
> "UMask": "0x20"
> },
> {
> - "BriefDescription": "Counts the number of occurences a retired store that is a cache line split. Each split should be counted only once.",
> + "BriefDescription": "Counts the number of occurrences a retired store that is a cache line split. Each split should be counted only once.",
> "EventCode": "0x03",
> "EventName": "RECYCLEQ.ST_SPLITS",
> "PublicDescription": "This event counts the number of retired store that experienced a cache line boundary split(Precise Event). Note that each spilt should be counted only once.",
> diff --git a/tools/perf/pmu-events/arch/x86/knightslanding/uncore-other.json b/tools/perf/pmu-events/arch/x86/knightslanding/uncore-other.json
> index 3abd9c3fdc48..369a4a4ede74 100644
> --- a/tools/perf/pmu-events/arch/x86/knightslanding/uncore-other.json
> +++ b/tools/perf/pmu-events/arch/x86/knightslanding/uncore-other.json
> @@ -1843,7 +1843,7 @@
> "Unit": "CHA"
> },
> {
> - "BriefDescription": "Counts cycles source throttling is adderted - horizontal",
> + "BriefDescription": "Counts cycles source throttling is asserted - horizontal",
> "EventCode": "0xA5",
> "EventName": "UNC_H_FAST_ASSERTED.HORZ",
> "PerPkg": "1",
> @@ -1851,7 +1851,7 @@
> "Unit": "CHA"
> },
> {
> - "BriefDescription": "Counts cycles source throttling is adderted - vertical",
> + "BriefDescription": "Counts cycles source throttling is asserted - vertical",
> "EventCode": "0xA5",https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/scripts/spelling.txt
> "EventName": "UNC_H_FAST_ASSERTED.VERT",
> "PerPkg": "1",
> diff --git a/tools/perf/pmu-events/arch/x86/sandybridge/pipeline.json b/tools/perf/pmu-events/arch/x86/sandybridge/pipeline.json
> index 53ab5993e8b0..54454e5e262c 100644
> --- a/tools/perf/pmu-events/arch/x86/sandybridge/pipeline.json
> +++ b/tools/perf/pmu-events/arch/x86/sandybridge/pipeline.json
> @@ -509,7 +509,7 @@
> "BriefDescription": "Cases when loads get true Block-on-Store blocking code preventing store forwarding.",
> "EventCode": "0x03",
> "EventName": "LD_BLOCKS.STORE_FORWARD",
> - "PublicDescription": "This event counts loads that followed a store to the same address, where the data could not be forwarded inside the pipeline from the store to the load. The most common reason why store forwarding would be blocked is when a load's address range overlaps with a preceeding smaller uncompleted store. See the table of not supported store forwards in the Intel(R) 64 and IA-32 Architectures Optimization Reference Manual. The penalty for blocked store forwarding is that the load must wait for the store to complete before it can be issued.",
> + "PublicDescription": "This event counts loads that followed a store to the same address, where the data could not be forwarded inside the pipeline from the store to the load. The most common reason why store forwarding would be blocked is when a load's address range overlaps with a preceding smaller uncompleted store. See the table of not supported store forwards in the Intel(R) 64 and IA-32 Architectures Optimization Reference Manual. The penalty for blocked store forwarding is that the load must wait for the store to complete before it can be issued.",
> "SampleAfterValue": "100003",
> "UMask": "0x2"
> },
> diff --git a/tools/perf/pmu-events/arch/x86/silvermont/frontend.json b/tools/perf/pmu-events/arch/x86/silvermont/frontend.json
> index c35da10f7133..cd6ed3f59e26 100644
> --- a/tools/perf/pmu-events/arch/x86/silvermont/frontend.json
> +++ b/tools/perf/pmu-events/arch/x86/silvermont/frontend.json
> @@ -11,7 +11,7 @@
> "BriefDescription": "Counts the number of JCC baclears",
> "EventCode": "0xE6",
> "EventName": "BACLEARS.COND",
> - "PublicDescription": "The BACLEARS event counts the number of times the front end is resteered, mainly when the Branch Prediction Unit cannot provide a correct prediction and this is corrected by the Branch Address Calculator at the front end. The BACLEARS.COND event counts the number of JCC (Jump on Condtional Code) baclears.",
> + "PublicDescription": "The BACLEARS event counts the number of times the front end is resteered, mainly when the Branch Prediction Unit cannot provide a correct prediction and this is corrected by the Branch Address Calculator at the front end. The BACLEARS.COND event counts the number of JCC (Jump on Conditional Code) baclears.",
> "SampleAfterValue": "200003",
> "UMask": "0x10"
> },
> diff --git a/tools/perf/pmu-events/arch/x86/westmereep-dp/virtual-memory.json b/tools/perf/pmu-events/arch/x86/westmereep-dp/virtual-memory.json
> index ef635bff1522..f75084309041 100644
> --- a/tools/perf/pmu-events/arch/x86/westmereep-dp/virtual-memory.json
> +++ b/tools/perf/pmu-events/arch/x86/westmereep-dp/virtual-memory.json
> @@ -56,7 +56,7 @@
> "UMask": "0x80"
> },
> {
> - "BriefDescription": "DTLB misses casued by low part of address",
> + "BriefDescription": "DTLB misses caused by low part of address",
> "EventCode": "0x49",
> "EventName": "DTLB_MISSES.PDE_MISS",
> "SampleAfterValue": "200000",
> diff --git a/tools/perf/util/evswitch.h b/tools/perf/util/evswitch.h
> index fd30460b6218..8ffdbe526d98 100644
> --- a/tools/perf/util/evswitch.h
> +++ b/tools/perf/util/evswitch.h
> @@ -22,9 +22,9 @@ bool evswitch__discard(struct evswitch *evswitch, struct evsel *evsel);
>
> #define OPTS_EVSWITCH(evswitch) \
> OPT_STRING(0, "switch-on", &(evswitch)->on_name, \
> - "event", "Consider events after the ocurrence of this event"), \
> + "event", "Consider events after the occurrence of this event"), \
> OPT_STRING(0, "switch-off", &(evswitch)->off_name, \
> - "event", "Stop considering events after the ocurrence of this event"), \
> + "event", "Stop considering events after the occurrence of this event"), \
> OPT_BOOLEAN(0, "show-on-off-events", &(evswitch)->show_on_off_events, \
> "Show the on/off switch events, used with --switch-on and --switch-off")

>
> --
> 2.39.0
>