Re: [PATCH V6 2/3] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver

[Jerome Brunet]

On Fri 20 Jan 2023 at 10:58, Yu Tu <yu.tu@xxxxxxxxxxx> wrote:

> Hi Jerome,
>
> On 2023/1/19 19:20, Jerome Brunet wrote:
>> [ EXTERNAL EMAIL ]
>> On Mon 16 Jan 2023 at 15:42, Yu Tu <yu.tu@xxxxxxxxxxx> wrote:
>> 
>>> Add the S4 PLL clock controller driver in the s4 SoC family.
>>>
>>> Signed-off-by: Yu Tu <yu.tu@xxxxxxxxxxx>
>>> ---
>> [...]
>> 
>>> +
>>> +static struct clk_regmap s4_fclk_div2 = {
>>> +	.data = &(struct clk_regmap_gate_data){
>>> +		.offset = ANACTRL_FIXPLL_CTRL1,
>>> +		.bit_idx = 24,
>>> +	},
>>> +	.hw.init = &(struct clk_init_data){
>>> +		.name = "fclk_div2",
>>> +		.ops = &clk_regmap_gate_ro_ops,
>> On the previous SoC, these fixed divider gate were not read-only.
>> They are marked as critical when necessary, with the appropriate
>> comment.
>> Why is it different on the s4 ?
>
> In fact, this part of the SOC is no different from the previous G12a/b and
> so on.
>
> I remember that my first version was made according to G12A, and I changed
> this way under your suggestion.
>
> Maybe you were busy and forgot. For me, this mode and the previous g12a
> mode function is ok. I can do either. So now how do you decide to go that
> way?

No I did not forgot.
I told you that cannot put CRITICAL (or IGNORE_USED) without explaining
why. I stand by this. Same goes for RO ops. 

>
>> 
>>> +		.parent_hws = (const struct clk_hw *[]) {
>>> +			&s4_fclk_div2_div.hw
>>> +		},
>>> +		.num_parents = 1,
>>> +	},
>>> +};
>>> +
>> [...]
>> 
>>> +#ifndef __MESON_S4_PLL_H__
>>> +#define __MESON_S4_PLL_H__
>>> +
>>> +/* ANA_CTRL - Registers
>>> + * REG_BASE:  REGISTER_BASE_ADDR = 0xfe008000
>> This multi-line comment style is wrong in clk/
>> REG_BASE is not used so I'm not sure this is useful
>
> I will remove REG_BASE and  change this format in next version.
>
>> 
>>> + */
>>> +#define ANACTRL_FIXPLL_CTRL0                       0x040
>>> +#define ANACTRL_FIXPLL_CTRL1                       0x044
>>> +#define ANACTRL_FIXPLL_CTRL2                       0x048
>>> +#define ANACTRL_FIXPLL_CTRL3                       0x04c
>>> +#define ANACTRL_FIXPLL_CTRL4                       0x050
>>> +#define ANACTRL_FIXPLL_CTRL5                       0x054
>>> +#define ANACTRL_FIXPLL_CTRL6                       0x058
>>> +#define ANACTRL_FIXPLL_STS                         0x05c
>>> +#define ANACTRL_GP0PLL_CTRL0                       0x080
>>> +#define ANACTRL_GP0PLL_CTRL1                       0x084
>>> +#define ANACTRL_GP0PLL_CTRL2                       0x088
>>> +#define ANACTRL_GP0PLL_CTRL3                       0x08c
>>> +#define ANACTRL_GP0PLL_CTRL4                       0x090
>>> +#define ANACTRL_GP0PLL_CTRL5                       0x094
>>> +#define ANACTRL_GP0PLL_CTRL6                       0x098
>>> +#define ANACTRL_GP0PLL_STS                         0x09c
>>> +#define ANACTRL_HIFIPLL_CTRL0                      0x100
>>> +#define ANACTRL_HIFIPLL_CTRL1                      0x104
>>> +#define ANACTRL_HIFIPLL_CTRL2                      0x108
>>> +#define ANACTRL_HIFIPLL_CTRL3                      0x10c
>>> +#define ANACTRL_HIFIPLL_CTRL4                      0x110
>>> +#define ANACTRL_HIFIPLL_CTRL5                      0x114
>>> +#define ANACTRL_HIFIPLL_CTRL6                      0x118
>>> +#define ANACTRL_HIFIPLL_STS                        0x11c
>>> +#define ANACTRL_MPLL_CTRL0                         0x180
>>> +#define ANACTRL_MPLL_CTRL1                         0x184
>>> +#define ANACTRL_MPLL_CTRL2                         0x188
>>> +#define ANACTRL_MPLL_CTRL3                         0x18c
>>> +#define ANACTRL_MPLL_CTRL4                         0x190
>>> +#define ANACTRL_MPLL_CTRL5                         0x194
>>> +#define ANACTRL_MPLL_CTRL6                         0x198
>>> +#define ANACTRL_MPLL_CTRL7                         0x19c
>>> +#define ANACTRL_MPLL_CTRL8                         0x1a0
>>> +#define ANACTRL_MPLL_STS                           0x1a4
>>> +#define ANACTRL_HDMIPLL_CTRL0                      0x1c0
>>> +#define ANACTRL_HDMIPLL_CTRL1                      0x1c4
>>> +#define ANACTRL_HDMIPLL_CTRL2                      0x1c8
>>> +#define ANACTRL_HDMIPLL_CTRL3                      0x1cc
>>> +#define ANACTRL_HDMIPLL_CTRL4                      0x1d0
>>> +#define ANACTRL_HDMIPLL_CTRL5                      0x1d4
>>> +#define ANACTRL_HDMIPLL_CTRL6                      0x1d8
>>> +#define ANACTRL_HDMIPLL_STS                        0x1dc
>>> +#define ANACTRL_HDMIPLL_VLOCK                      0x1e4
>>> +
>>> +/*
>>> + * CLKID index values
>>> + *
>>> + * These indices are entirely contrived and do not map onto the hardware.
>>> + * It has now been decided to expose everything by default in the DT header:
>>> + * include/dt-bindings/clock/axg-clkc.h. Only the clocks ids we don't want
>>> + * to expose, such as the internal muxes and dividers of composite clocks,
>>> + * will remain defined here.
>>> + */
>>> +#define CLKID_FIXED_PLL_DCO		0
>>> +#define CLKID_FCLK_DIV2_DIV		2
>>> +#define CLKID_FCLK_DIV3_DIV		4
>>> +#define CLKID_FCLK_DIV4_DIV		6
>>> +#define CLKID_FCLK_DIV5_DIV		8
>>> +#define CLKID_FCLK_DIV7_DIV		10
>>> +#define CLKID_FCLK_DIV2P5_DIV		12
>>> +#define CLKID_GP0_PLL_DCO		14
>>> +#define CLKID_HIFI_PLL_DCO		16
>>> +#define CLKID_HDMI_PLL_DCO		18
>>> +#define CLKID_HDMI_PLL_OD		19
>>> +#define CLKID_MPLL_50M_DIV		21
>>> +#define CLKID_MPLL_PREDIV		23
>>> +#define CLKID_MPLL0_DIV			24
>>> +#define CLKID_MPLL1_DIV			26
>>> +#define CLKID_MPLL2_DIV			28
>>> +#define CLKID_MPLL3_DIV			30
>>> +
>>> +#define NR_PLL_CLKS			32
>>> +/* include the CLKIDs that have been made part of the DT binding */
>>> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h>
>>> +
>>> +#endif /* __MESON_S4_PLL_H__ */
>>