Re: [PATCH v2 6/8] ASoC: cs42l42: Add Soundwire support

[Pierre-Louis Bossart]

>>> +static int cs42l42_sdw_dai_startup(struct snd_pcm_substream *substream,
>>> +                   struct snd_soc_dai *dai)
>>> +{
>>> +    struct cs42l42_private *cs42l42 =
>>> snd_soc_component_get_drvdata(dai->component);
>>> +
>>> +    if (!cs42l42->init_done)
>>> +        return -ENODEV;
>>
>> Can this happen? IIRC the ASoC framework would use
>> pm_runtime_resume_and_get() before .startup, which would guarantee that
>> the device is initialized, no?
>>
> 
> Yes, this can happen. Because of the way that the SoundWire enumeration
> was implemented in the core code, it isn't a probe event so we cannot
> call snd_soc_register_component() on enumeration because -EPROBE_DEFER
> wouldn't be handled. So the snd_soc_register_component() must be called
> from probe(). This leaves a limbo situation where we've registered the
> driver but in fact don't yet have any hardware. ALSA/ASoC doesn't know
> that we've registered before we are functional so they are happy to
> go ahead and try to use the soundcard. If for some reason the hardware
> failed to enumerate we can get here without having enumerated.

Humm, yes, but you've also made the regmap cache-only, so is there
really a problem?

FWIW I don't see a startup callback in any other codec driver. It may be
wrong but it's also a sign that this isn't a problem we've seen so far
on existing Intel-based platforms.

> 
>>> +
>>> +    return 0;
>>> +}
>>> +
>>> +static int cs42l42_sdw_dai_hw_params(struct snd_pcm_substream
>>> *substream,
>>> +                     struct snd_pcm_hw_params *params,
>>> +                     struct snd_soc_dai *dai)
>>> +{
>>> +    struct cs42l42_private *cs42l42 =
>>> snd_soc_component_get_drvdata(dai->component);
>>> +    struct sdw_stream_runtime *sdw_stream =
>>> snd_soc_dai_get_dma_data(dai, substream);
>>> +    struct sdw_stream_config stream_config = {0};
>>> +    struct sdw_port_config port_config = {0};
>>> +    int ret;
>>> +
>>> +    if (!sdw_stream)
>>> +        return -EINVAL;
>>> +
>>> +    /* Needed for PLL configuration when we are notified of new bus
>>> config */
>>> +    cs42l42->sample_rate = params_rate(params);
>>
>> wouldn't it be better to check if the sample_rate is supported by the
>> PLL here, instead of in the .prepare step ...
>>
> It depends on the soundwire bus clock. We need to know both to determine
> whether they are valid. IFF we can assume that the call to
> sdw_stream_add_slave() will always invoke the bus_config() callback we
> can call cs42l42_pll_config() from cs42l42_sdw_bus_config() and return
> an error from cs42l42_sdw_bus_config() if the {swire_clk, sample_rate}
> pair isn't valid.

You lost me here. Are you saying the soundwire bus clock is only known
in the prepare stage?


>>> +static int cs42l42_sdw_dai_set_sdw_stream(struct snd_soc_dai *dai,
>>> void *sdw_stream,
>>> +                      int direction)
>>> +{
>>> +    if (!sdw_stream)
>>> +        return 0;
>>> +
>>> +    if (direction == SNDRV_PCM_STREAM_PLAYBACK)
>>> +        dai->playback_dma_data = sdw_stream;
>>> +    else
>>> +        dai->capture_dma_data = sdw_stream;
>>> +
>>> +    return 0;
>>
>> Humm, this is interesting, you are not using the sdw_stream_data that
>> all other codecs use, but in hindsight I have no idea why we allocate
>> something to only store a pointer.
>>
> 
> Indeed. I can see no reason to wrap this pointer in another struct when
> we can store the pointer direct so I dropped the wrapper struct.

I'll see if we can simplify the other codec drivers.

>>> +static int cs42l42_sdw_update_status(struct sdw_slave *peripheral,
>>> +                     enum sdw_slave_status status);s
>>> +{
>>> +    struct cs42l42_private *cs42l42 =
>>> dev_get_drvdata(&peripheral->dev);
>>> +
>>> +    switch (status) {
>>> +    case SDW_SLAVE_ATTACHED:
>>> +        dev_dbg(cs42l42->dev, "ATTACHED\n");
>>> +        if (!cs42l42->init_done)
>>> +            cs42l42_sdw_init(peripheral);
>>
>> unclear to me what happens is the bus suspends, how would you redo the
>> init?
>>
> 
> We don't need to re-run the init(). A regcache_sync() will restore
> settings.

ah, interesting. Other codec drivers play with specific registers that
aren't in regmap. There's also headset calibration that's done
differently in the first init or later.