[PATCH 2/2] arm64: dts: qcom: sm6115: Use 64 bit addressing
From: Konrad Dybcio
Date: Thu Jan 19 2023 - 05:17:05 EST
SM6115's SMMU uses 36bit VAs, which is a good indicator that we
should increase (dma-)ranges - and by extension #address- and
#size-cells to prevent things from getting lost in translation
(both literally and figuratively). Do so.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm6115.dtsi | 219 ++++++++++++++-------------
1 file changed, 113 insertions(+), 106 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index c0f9bdc25508..fa834eedf488 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -347,19 +347,22 @@ rpmpd_opp_turbo_plus: opp8 {
soc: soc@0 {
compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0 0 0xffffffff>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0 0 0 0 0x10 0>;
+ dma-ranges = <0 0 0 0 0x10 0>;
tcsr_mutex: hwlock@340000 {
compatible = "qcom,tcsr-mutex";
- reg = <0x00340000 0x20000>;
+ reg = <0x0 0x00340000 0x0 0x20000>;
#hwlock-cells = <1>;
};
tlmm: pinctrl@500000 {
compatible = "qcom,sm6115-tlmm";
- reg = <0x00500000 0x400000>, <0x00900000 0x400000>, <0x00d00000 0x400000>;
+ reg = <0x0 0x00500000 0x0 0x400000>,
+ <0x0 0x00900000 0x0 0x400000>,
+ <0x0 0x00d00000 0x0 0x400000>;
reg-names = "west", "south", "east";
interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
@@ -559,7 +562,7 @@ sd-cd-pins {
gcc: clock-controller@1400000 {
compatible = "qcom,gcc-sm6115";
- reg = <0x01400000 0x1f0000>;
+ reg = <0x0 0x01400000 0x0 0x1f0000>;
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
clock-names = "bi_tcxo", "sleep_clk";
#clock-cells = <1>;
@@ -569,7 +572,7 @@ gcc: clock-controller@1400000 {
usb_1_hsphy: phy@1613000 {
compatible = "qcom,sm6115-qusb2-phy";
- reg = <0x01613000 0x180>;
+ reg = <0x0 0x01613000 0x0 0x180>;
#phy-cells = <0>;
clocks = <&gcc GCC_AHB2PHY_USB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
@@ -583,7 +586,7 @@ usb_1_hsphy: phy@1613000 {
qfprom@1b40000 {
compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
- reg = <0x01b40000 0x7000>;
+ reg = <0x0 0x01b40000 0x0 0x7000>;
#address-cells = <1>;
#size-cells = <1>;
@@ -595,18 +598,18 @@ qusb2_hstx_trim: hstx-trim@25b {
rng: rng@1b53000 {
compatible = "qcom,prng-ee";
- reg = <0x01b53000 0x1000>;
+ reg = <0x0 0x01b53000 0x0 0x1000>;
clocks = <&gcc GCC_PRNG_AHB_CLK>;
clock-names = "core";
};
spmi_bus: spmi@1c40000 {
compatible = "qcom,spmi-pmic-arb";
- reg = <0x01c40000 0x1100>,
- <0x01e00000 0x2000000>,
- <0x03e00000 0x100000>,
- <0x03f00000 0xa0000>,
- <0x01c0a000 0x26000>;
+ reg = <0x0 0x01c40000 0x0 0x1100>,
+ <0x0 0x01e00000 0x0 0x2000000>,
+ <0x0 0x03e00000 0x0 0x100000>,
+ <0x0 0x03f00000 0x0 0xa0000>,
+ <0x0 0x01c0a000 0x0 0x26000>;
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
interrupt-names = "periph_irq";
interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
@@ -620,8 +623,8 @@ spmi_bus: spmi@1c40000 {
tsens0: thermal-sensor@4410000 {
compatible = "qcom,sm6115-tsens", "qcom,tsens-v2";
- reg = <0x04411000 0x1ff>, /* TM */
- <0x04410000 0x8>; /* SROT */
+ reg = <0x0 0x04411000 0x0 0x1ff>, /* TM */
+ <0x0 0x04410000 0x0 0x8>; /* SROT */
#qcom,sensors = <16>;
interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
@@ -631,17 +634,19 @@ tsens0: thermal-sensor@4410000 {
rpm_msg_ram: sram@45f0000 {
compatible = "qcom,rpm-msg-ram";
- reg = <0x045f0000 0x7000>;
+ reg = <0x0 0x045f0000 0x0 0x7000>;
};
sram@4690000 {
compatible = "qcom,rpm-stats";
- reg = <0x04690000 0x10000>;
+ reg = <0x0 0x04690000 0x0 0x10000>;
};
sdhc_1: mmc@4744000 {
compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5";
- reg = <0x04744000 0x1000>, <0x04745000 0x1000>, <0x04748000 0x8000>;
+ reg = <0x0 0x04744000 0x0 0x1000>,
+ <0x0 0x04745000 0x0 0x1000>,
+ <0x0 0x04748000 0x0 0x8000>;
reg-names = "hc", "cqhci", "ice";
interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
@@ -664,7 +669,7 @@ sdhc_1: mmc@4744000 {
sdhc_2: mmc@4784000 {
compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5";
- reg = <0x04784000 0x1000>;
+ reg = <0x0 0x04784000 0x0 0x1000>;
reg-names = "hc";
interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
@@ -707,7 +712,7 @@ opp-202000000 {
ufs_mem_hc: ufs@4804000 {
compatible = "qcom,sm6115-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
- reg = <0x04804000 0x3000>, <0x04810000 0x8000>;
+ reg = <0x0 0x04804000 0x0 0x3000>, <0x0 0x04810000 0x0 0x8000>;
reg-names = "std", "ice";
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
phys = <&ufs_mem_phy_lanes>;
@@ -751,9 +756,9 @@ ufs_mem_hc: ufs@4804000 {
ufs_mem_phy: phy@4807000 {
compatible = "qcom,sm6115-qmp-ufs-phy";
- reg = <0x04807000 0x1c4>;
- #address-cells = <1>;
- #size-cells = <1>;
+ reg = <0x0 0x04807000 0x0 0x1c4>;
+ #address-cells = <2>;
+ #size-cells = <2>;
ranges;
clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
@@ -764,16 +769,16 @@ ufs_mem_phy: phy@4807000 {
status = "disabled";
ufs_mem_phy_lanes: phy@4807400 {
- reg = <0x4807400 0x098>,
- <0x4807600 0x130>,
- <0x4807c00 0x16c>;
+ reg = <0x0 0x4807400 0x0 0x098>,
+ <0x0 0x4807600 0x0 0x130>,
+ <0x0 0x4807c00 0x0 0x16c>;
#phy-cells = <0>;
};
};
gpi_dma0: dma-controller@4a00000 {
compatible = "qcom,sm6115-gpi-dma", "qcom,sm6350-gpi-dma";
- reg = <0x04a00000 0x60000>;
+ reg = <0x0 0x04a00000 0x0 0x60000>;
interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
@@ -793,19 +798,19 @@ gpi_dma0: dma-controller@4a00000 {
qupv3_id_0: geniqup@4ac0000 {
compatible = "qcom,geni-se-qup";
- reg = <0x04ac0000 0x2000>;
+ reg = <0x0 0x04ac0000 0x0 0x2000>;
clock-names = "m-ahb", "s-ahb";
clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
- #address-cells = <1>;
- #size-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <2>;
iommus = <&apps_smmu 0xe3 0x0>;
ranges;
status = "disabled";
i2c0: i2c@4a80000 {
compatible = "qcom,geni-i2c";
- reg = <0x04a80000 0x4000>;
+ reg = <0x0 0x04a80000 0x0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
pinctrl-names = "default";
@@ -821,7 +826,7 @@ i2c0: i2c@4a80000 {
spi0: spi@4a80000 {
compatible = "qcom,geni-spi";
- reg = <0x04a80000 0x4000>;
+ reg = <0x0 0x04a80000 0x0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
pinctrl-names = "default";
@@ -837,7 +842,7 @@ spi0: spi@4a80000 {
i2c1: i2c@4a84000 {
compatible = "qcom,geni-i2c";
- reg = <0x04a84000 0x4000>;
+ reg = <0x0 0x04a84000 0x0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
pinctrl-names = "default";
@@ -853,7 +858,7 @@ i2c1: i2c@4a84000 {
spi1: spi@4a84000 {
compatible = "qcom,geni-spi";
- reg = <0x04a84000 0x4000>;
+ reg = <0x0 0x04a84000 0x0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
pinctrl-names = "default";
@@ -869,7 +874,7 @@ spi1: spi@4a84000 {
i2c2: i2c@4a88000 {
compatible = "qcom,geni-i2c";
- reg = <0x04a88000 0x4000>;
+ reg = <0x0 0x04a88000 0x0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
pinctrl-names = "default";
@@ -885,7 +890,7 @@ i2c2: i2c@4a88000 {
spi2: spi@4a88000 {
compatible = "qcom,geni-spi";
- reg = <0x04a88000 0x4000>;
+ reg = <0x0 0x04a88000 0x0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
pinctrl-names = "default";
@@ -901,7 +906,7 @@ spi2: spi@4a88000 {
i2c3: i2c@4a8c000 {
compatible = "qcom,geni-i2c";
- reg = <0x04a8c000 0x4000>;
+ reg = <0x0 0x04a8c000 0x0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
pinctrl-names = "default";
@@ -917,7 +922,7 @@ i2c3: i2c@4a8c000 {
spi3: spi@4a8c000 {
compatible = "qcom,geni-spi";
- reg = <0x04a8c000 0x4000>;
+ reg = <0x0 0x04a8c000 0x0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
pinctrl-names = "default";
@@ -933,7 +938,7 @@ spi3: spi@4a8c000 {
i2c4: i2c@4a90000 {
compatible = "qcom,geni-i2c";
- reg = <0x04a90000 0x4000>;
+ reg = <0x0 0x04a90000 0x0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
pinctrl-names = "default";
@@ -949,7 +954,7 @@ i2c4: i2c@4a90000 {
spi4: spi@4a90000 {
compatible = "qcom,geni-spi";
- reg = <0x04a90000 0x4000>;
+ reg = <0x0 0x04a90000 0x0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
pinctrl-names = "default";
@@ -965,7 +970,7 @@ spi4: spi@4a90000 {
i2c5: i2c@4a94000 {
compatible = "qcom,geni-i2c";
- reg = <0x04a94000 0x4000>;
+ reg = <0x0 0x04a94000 0x0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
pinctrl-names = "default";
@@ -981,7 +986,7 @@ i2c5: i2c@4a94000 {
spi5: spi@4a94000 {
compatible = "qcom,geni-spi";
- reg = <0x04a94000 0x4000>;
+ reg = <0x0 0x04a94000 0x0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
pinctrl-names = "default";
@@ -998,9 +1003,9 @@ spi5: spi@4a94000 {
usb_1: usb@4ef8800 {
compatible = "qcom,sm6115-dwc3", "qcom,dwc3";
- reg = <0x04ef8800 0x400>;
- #address-cells = <1>;
- #size-cells = <1>;
+ reg = <0x0 0x04ef8800 0x0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
ranges;
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
@@ -1026,7 +1031,7 @@ usb_1: usb@4ef8800 {
usb_1_dwc3: usb@4e00000 {
compatible = "snps,dwc3";
- reg = <0x04e00000 0xcd00>;
+ reg = <0x0 0x04e00000 0x0 0xcd00>;
interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb_1_hsphy>;
phy-names = "usb2-phy";
@@ -1043,7 +1048,7 @@ usb_1_dwc3: usb@4e00000 {
mdss: display-subsystem@5e00000 {
compatible = "qcom,sm6115-mdss";
- reg = <0x05e00000 0x1000>;
+ reg = <0x0 0x05e00000 0x0 0x1000>;
reg-names = "mdss";
power-domains = <&dispcc MDSS_GDSC>;
@@ -1059,16 +1064,16 @@ mdss: display-subsystem@5e00000 {
iommus = <&apps_smmu 0x420 0x2>,
<&apps_smmu 0x421 0x0>;
- #address-cells = <1>;
- #size-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <2>;
ranges;
status = "disabled";
mdp: display-controller@5e01000 {
compatible = "qcom,sm6115-dpu";
- reg = <0x05e01000 0x8f000>,
- <0x05eb0000 0x2008>;
+ reg = <0x0 0x05e01000 0x0 0x8f000>,
+ <0x0 0x05eb0000 0x0 0x2008>;
reg-names = "mdp", "vbif";
clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
@@ -1134,7 +1139,7 @@ opp-384000000 {
mdss_dsi0: dsi@5e94000 {
compatible = "qcom,dsi-ctrl-6g-qcm2290";
- reg = <0x05e94000 0x400>;
+ reg = <0x0 0x05e94000 0x0 0x400>;
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
@@ -1206,9 +1211,9 @@ opp-187500000 {
mdss_dsi0_phy: phy@5e94400 {
compatible = "qcom,dsi-phy-14nm-2290";
- reg = <0x05e94400 0x100>,
- <0x05e94500 0x300>,
- <0x05e94800 0x188>;
+ reg = <0x0 0x05e94400 0x0 0x100>,
+ <0x0 0x05e94500 0x0 0x300>,
+ <0x0 0x05e94800 0x0 0x188>;
reg-names = "dsi_phy",
"dsi_phy_lane",
"dsi_pll";
@@ -1226,7 +1231,7 @@ mdss_dsi0_phy: phy@5e94400 {
dispcc: clock-controller@5f00000 {
compatible = "qcom,sm6115-dispcc";
- reg = <0x05f00000 0x20000>;
+ reg = <0x0 0x05f00000 0 0x20000>;
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
<&sleep_clk>,
<&mdss_dsi0_phy 0>,
@@ -1239,8 +1244,8 @@ dispcc: clock-controller@5f00000 {
stm@8002000 {
compatible = "arm,coresight-stm", "arm,primecell";
- reg = <0x08002000 0x1000>,
- <0x0e280000 0x180000>;
+ reg = <0x0 0x08002000 0x0 0x1000>,
+ <0x0 0x0e280000 0x0 0x180000>;
reg-names = "stm-base", "stm-stimulus-base";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
@@ -1259,7 +1264,7 @@ stm_out: endpoint {
cti0: cti@8010000 {
compatible = "arm,coresight-cti", "arm,primecell";
- reg = <0x08010000 0x1000>;
+ reg = <0x0 0x08010000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1269,7 +1274,7 @@ cti0: cti@8010000 {
cti1: cti@8011000 {
compatible = "arm,coresight-cti", "arm,primecell";
- reg = <0x08011000 0x1000>;
+ reg = <0x0 0x08011000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1279,7 +1284,7 @@ cti1: cti@8011000 {
cti2: cti@8012000 {
compatible = "arm,coresight-cti", "arm,primecell";
- reg = <0x08012000 0x1000>;
+ reg = <0x0 0x08012000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1289,7 +1294,7 @@ cti2: cti@8012000 {
cti3: cti@8013000 {
compatible = "arm,coresight-cti", "arm,primecell";
- reg = <0x08013000 0x1000>;
+ reg = <0x0 0x08013000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1299,7 +1304,7 @@ cti3: cti@8013000 {
cti4: cti@8014000 {
compatible = "arm,coresight-cti", "arm,primecell";
- reg = <0x08014000 0x1000>;
+ reg = <0x0 0x08014000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1309,7 +1314,7 @@ cti4: cti@8014000 {
cti5: cti@8015000 {
compatible = "arm,coresight-cti", "arm,primecell";
- reg = <0x08015000 0x1000>;
+ reg = <0x0 0x08015000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1319,7 +1324,7 @@ cti5: cti@8015000 {
cti6: cti@8016000 {
compatible = "arm,coresight-cti", "arm,primecell";
- reg = <0x08016000 0x1000>;
+ reg = <0x0 0x08016000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1329,7 +1334,7 @@ cti6: cti@8016000 {
cti7: cti@8017000 {
compatible = "arm,coresight-cti", "arm,primecell";
- reg = <0x08017000 0x1000>;
+ reg = <0x0 0x08017000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1339,7 +1344,7 @@ cti7: cti@8017000 {
cti8: cti@8018000 {
compatible = "arm,coresight-cti", "arm,primecell";
- reg = <0x08018000 0x1000>;
+ reg = <0x0 0x08018000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1349,7 +1354,7 @@ cti8: cti@8018000 {
cti9: cti@8019000 {
compatible = "arm,coresight-cti", "arm,primecell";
- reg = <0x08019000 0x1000>;
+ reg = <0x0 0x08019000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1359,7 +1364,7 @@ cti9: cti@8019000 {
cti10: cti@801a000 {
compatible = "arm,coresight-cti", "arm,primecell";
- reg = <0x0801a000 0x1000>;
+ reg = <0x0 0x0801a000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1369,7 +1374,7 @@ cti10: cti@801a000 {
cti11: cti@801b000 {
compatible = "arm,coresight-cti", "arm,primecell";
- reg = <0x0801b000 0x1000>;
+ reg = <0x0 0x0801b000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1379,7 +1384,7 @@ cti11: cti@801b000 {
cti12: cti@801c000 {
compatible = "arm,coresight-cti", "arm,primecell";
- reg = <0x0801c000 0x1000>;
+ reg = <0x0 0x0801c000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1389,7 +1394,7 @@ cti12: cti@801c000 {
cti13: cti@801d000 {
compatible = "arm,coresight-cti", "arm,primecell";
- reg = <0x0801d000 0x1000>;
+ reg = <0x0 0x0801d000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1399,7 +1404,7 @@ cti13: cti@801d000 {
cti14: cti@801e000 {
compatible = "arm,coresight-cti", "arm,primecell";
- reg = <0x0801e000 0x1000>;
+ reg = <0x0 0x0801e000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1409,7 +1414,7 @@ cti14: cti@801e000 {
cti15: cti@801f000 {
compatible = "arm,coresight-cti", "arm,primecell";
- reg = <0x0801f000 0x1000>;
+ reg = <0x0 0x0801f000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1419,7 +1424,7 @@ cti15: cti@801f000 {
replicator@8046000 {
compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
- reg = <0x08046000 0x1000>;
+ reg = <0x0 0x08046000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1445,7 +1450,7 @@ replicator_in: endpoint {
etf@8047000 {
compatible = "arm,coresight-tmc", "arm,primecell";
- reg = <0x08047000 0x1000>;
+ reg = <0x0 0x08047000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1471,7 +1476,7 @@ etf_out: endpoint {
etr@8048000 {
compatible = "arm,coresight-tmc", "arm,primecell";
- reg = <0x08048000 0x1000>;
+ reg = <0x0 0x08048000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1489,7 +1494,7 @@ etr_in: endpoint {
funnel@8041000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0x08041000 0x1000>;
+ reg = <0x0 0x08041000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1515,7 +1520,7 @@ funnel_in0_in: endpoint {
funnel@8042000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0x08042000 0x1000>;
+ reg = <0x0 0x08042000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1541,7 +1546,7 @@ funnel_in1_in: endpoint {
funnel@8045000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0x08045000 0x1000>;
+ reg = <0x0 0x08045000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1578,7 +1583,7 @@ merge_funnel_in1: endpoint {
etm@9040000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x09040000 0x1000>;
+ reg = <0x0 0x09040000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1599,7 +1604,7 @@ etm0_out: endpoint {
etm@9140000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x09140000 0x1000>;
+ reg = <0x0 0x09140000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1620,7 +1625,7 @@ etm1_out: endpoint {
etm@9240000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x09240000 0x1000>;
+ reg = <0x0 0x09240000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1641,7 +1646,7 @@ etm2_out: endpoint {
etm@9340000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x09340000 0x1000>;
+ reg = <0x0 0x09340000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1662,7 +1667,7 @@ etm3_out: endpoint {
etm@9440000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x09440000 0x1000>;
+ reg = <0x0 0x09440000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1683,7 +1688,7 @@ etm4_out: endpoint {
etm@9540000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x09540000 0x1000>;
+ reg = <0x0 0x09540000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1704,7 +1709,7 @@ etm5_out: endpoint {
etm@9640000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x09640000 0x1000>;
+ reg = <0x0 0x09640000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1725,7 +1730,7 @@ etm6_out: endpoint {
etm@9740000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x09740000 0x1000>;
+ reg = <0x0 0x09740000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1746,7 +1751,7 @@ etm7_out: endpoint {
funnel@9800000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0x09800000 0x1000>;
+ reg = <0x0 0x09800000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1825,7 +1830,7 @@ funnel_apss0_in7: endpoint {
funnel@9810000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0x09810000 0x1000>;
+ reg = <0x0 0x09810000 0x0 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1851,7 +1856,7 @@ funnel_apss1_in: endpoint {
apps_smmu: iommu@c600000 {
compatible = "qcom,sm6115-smmu-500", "qcom,smmu-500", "arm,mmu-500";
- reg = <0x0c600000 0x80000>;
+ reg = <0x0 0x0c600000 0x0 0x80000>;
#iommu-cells = <2>;
#global-interrupts = <1>;
@@ -1924,7 +1929,7 @@ apps_smmu: iommu@c600000 {
wifi: wifi@c800000 {
compatible = "qcom,wcn3990-wifi";
- reg = <0x0c800000 0x800000>;
+ reg = <0x0 0x0c800000 0x0 0x800000>;
reg-names = "membase";
memory-region = <&wlan_msa_mem>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
@@ -1946,63 +1951,63 @@ wifi: wifi@c800000 {
apcs_glb: mailbox@f111000 {
compatible = "qcom,sm6115-apcs-hmss-global";
- reg = <0x0f111000 0x1000>;
+ reg = <0x0 0x0f111000 0x0 0x1000>;
#mbox-cells = <1>;
};
timer@f120000 {
compatible = "arm,armv7-timer-mem";
- reg = <0x0f120000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
+ reg = <0x0 0x0f120000 0x0 0x1000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
ranges;
clock-frequency = <19200000>;
frame@f121000 {
- reg = <0x0f121000 0x1000>, <0x0f122000 0x1000>;
+ reg = <0x0 0x0f121000 0x0 0x1000>, <0x0 0x0f122000 0x0 0x1000>;
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
};
frame@f123000 {
- reg = <0x0f123000 0x1000>;
+ reg = <0x0 0x0f123000 0x0 0x1000>;
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
frame@f124000 {
- reg = <0x0f124000 0x1000>;
+ reg = <0x0 0x0f124000 0x0 0x1000>;
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
frame@f125000 {
- reg = <0x0f125000 0x1000>;
+ reg = <0x0 0x0f125000 0x0 0x1000>;
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
frame@f126000 {
- reg = <0x0f126000 0x1000>;
+ reg = <0x0 0x0f126000 0x0 0x1000>;
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
frame@f127000 {
- reg = <0x0f127000 0x1000>;
+ reg = <0x0 0x0f127000 0x0 0x1000>;
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
frame@f128000 {
- reg = <0x0f128000 0x1000>;
+ reg = <0x0 0x0f128000 0x0 0x1000>;
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -2011,7 +2016,8 @@ frame@f128000 {
intc: interrupt-controller@f200000 {
compatible = "arm,gic-v3";
- reg = <0x0f200000 0x10000>, <0x0f300000 0x100000>;
+ reg = <0x0 0x0f200000 0x0 0x10000>,
+ <0x0 0x0f300000 0x0 0x100000>;
#interrupt-cells = <3>;
interrupt-controller;
interrupt-parent = <&intc>;
@@ -2022,7 +2028,8 @@ intc: interrupt-controller@f200000 {
cpufreq_hw: cpufreq@f521000 {
compatible = "qcom,cpufreq-hw";
- reg = <0x0f521000 0x1000>, <0x0f523000 0x1000>;
+ reg = <0x0 0x0f521000 0x0 0x1000>,
+ <0x0 0x0f523000 0x0 0x1000>;
reg-names = "freq-domain0", "freq-domain1";
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
--
2.39.1