[PATCH 4/5] ASoC: ux500: remove stedma40 references
From: Arnd Bergmann
Date: Wed Jan 18 2023 - 11:17:47 EST
From: Arnd Bergmann <arnd@xxxxxxxx>
ux500_pcm_request_chan() is never called because the dma channels
are already set up from DT. Remove this, along with the
ux500_msp_dma_params structure.
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
---
sound/soc/ux500/ux500_msp_dai.c | 4 +--
sound/soc/ux500/ux500_msp_i2s.c | 41 +------------------------------
sound/soc/ux500/ux500_msp_i2s.h | 9 +------
sound/soc/ux500/ux500_pcm.c | 43 +--------------------------------
4 files changed, 5 insertions(+), 92 deletions(-)
diff --git a/sound/soc/ux500/ux500_msp_dai.c b/sound/soc/ux500/ux500_msp_dai.c
index 6e86efd06ec1..6fb1a5c207bc 100644
--- a/sound/soc/ux500/ux500_msp_dai.c
+++ b/sound/soc/ux500/ux500_msp_dai.c
@@ -670,8 +670,8 @@ static int ux500_msp_dai_of_probe(struct snd_soc_dai *dai)
if (!capture_dma_data)
return -ENOMEM;
- playback_dma_data->addr = drvdata->msp->playback_dma_data.tx_rx_addr;
- capture_dma_data->addr = drvdata->msp->capture_dma_data.tx_rx_addr;
+ playback_dma_data->addr = drvdata->msp->tx_rx_addr;
+ capture_dma_data->addr = drvdata->msp->tx_rx_addr;
playback_dma_data->maxburst = 4;
capture_dma_data->maxburst = 4;
diff --git a/sound/soc/ux500/ux500_msp_i2s.c b/sound/soc/ux500/ux500_msp_i2s.c
index bfca5553381f..fbfeefa418ca 100644
--- a/sound/soc/ux500/ux500_msp_i2s.c
+++ b/sound/soc/ux500/ux500_msp_i2s.c
@@ -360,20 +360,6 @@ static int enable_msp(struct ux500_msp *msp, struct ux500_msp_config *config)
__func__, status);
}
- /* Make sure the correct DMA-directions are configured */
- if ((config->direction & MSP_DIR_RX) &&
- !msp->capture_dma_data.dma_cfg) {
- dev_err(msp->dev, "%s: ERROR: MSP RX-mode is not configured!",
- __func__);
- return -EINVAL;
- }
- if ((config->direction == MSP_DIR_TX) &&
- !msp->playback_dma_data.dma_cfg) {
- dev_err(msp->dev, "%s: ERROR: MSP TX-mode is not configured!",
- __func__);
- return -EINVAL;
- }
-
reg_val_DMACR = readl(msp->registers + MSP_DMACR);
if (config->direction & MSP_DIR_RX)
reg_val_DMACR |= RX_DMA_ENABLE;
@@ -638,40 +624,17 @@ int ux500_msp_i2s_close(struct ux500_msp *msp, unsigned int dir)
}
-static int ux500_msp_i2s_of_init_msp(struct platform_device *pdev,
- struct ux500_msp *msp);
-{
- msp->playback_dma_data.dma_cfg = devm_kzalloc(&pdev->dev,
- sizeof(struct stedma40_chan_cfg),
- GFP_KERNEL);
- if (!msp->playback_dma_data.dma_cfg)
- return -ENOMEM;
-
- msp->capture_dma_data.dma_cfg = devm_kzalloc(&pdev->dev,
- sizeof(struct stedma40_chan_cfg),
- GFP_KERNEL);
- if (!msp->capture_dma_data.dma_cfg)
- return -ENOMEM;
-
- return 0;
-}
-
int ux500_msp_i2s_init_msp(struct platform_device *pdev,
struct ux500_msp **msp_p)
{
struct resource *res = NULL;
struct ux500_msp *msp;
- int ret;
*msp_p = devm_kzalloc(&pdev->dev, sizeof(struct ux500_msp), GFP_KERNEL);
msp = *msp_p;
if (!msp)
return -ENOMEM;
- ret = ux500_msp_i2s_of_init_msp(pdev, msp);
- if (ret)
- return ret;
-
msp->dev = &pdev->dev;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -681,9 +644,7 @@ int ux500_msp_i2s_init_msp(struct platform_device *pdev,
return -ENOMEM;
}
- msp->playback_dma_data.tx_rx_addr = res->start + MSP_DR;
- msp->capture_dma_data.tx_rx_addr = res->start + MSP_DR;
-
+ msp->tx_rx_addr = res->start + MSP_DR;
msp->registers = devm_ioremap(&pdev->dev, res->start,
resource_size(res));
if (msp->registers == NULL) {
diff --git a/sound/soc/ux500/ux500_msp_i2s.h b/sound/soc/ux500/ux500_msp_i2s.h
index 6b353423b75a..69d4ebc409fc 100644
--- a/sound/soc/ux500/ux500_msp_i2s.h
+++ b/sound/soc/ux500/ux500_msp_i2s.h
@@ -462,18 +462,11 @@ struct ux500_msp_config {
unsigned int iodelay;
};
-struct ux500_msp_dma_params {
- unsigned int data_size;
- dma_addr_t tx_rx_addr;
- struct stedma40_chan_cfg *dma_cfg;
-};
-
struct ux500_msp {
int id;
void __iomem *registers;
struct device *dev;
- struct ux500_msp_dma_params playback_dma_data;
- struct ux500_msp_dma_params capture_dma_data;
+ dma_addr_t tx_rx_addr;
enum msp_state msp_state;
int def_elem_len;
unsigned int dir_busy;
diff --git a/sound/soc/ux500/ux500_pcm.c b/sound/soc/ux500/ux500_pcm.c
index ca87517d80c9..53b5649cfdda 100644
--- a/sound/soc/ux500/ux500_pcm.c
+++ b/sound/soc/ux500/ux500_pcm.c
@@ -13,7 +13,6 @@
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/slab.h>
-#include <linux/platform_data/dma-ste-dma40.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -29,44 +28,6 @@
#define UX500_PLATFORM_PERIODS_MAX 48
#define UX500_PLATFORM_BUFFER_BYTES_MAX (2048 * PAGE_SIZE)
-static struct dma_chan *ux500_pcm_request_chan(struct snd_soc_pcm_runtime *rtd,
- struct snd_pcm_substream *substream)
-{
- struct snd_soc_dai *dai = asoc_rtd_to_cpu(rtd, 0);
- u16 per_data_width, mem_data_width;
- struct stedma40_chan_cfg *dma_cfg;
- struct ux500_msp_dma_params *dma_params;
-
- dma_params = snd_soc_dai_get_dma_data(dai, substream);
- dma_cfg = dma_params->dma_cfg;
-
- mem_data_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
-
- switch (dma_params->data_size) {
- case 32:
- per_data_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- break;
- case 16:
- per_data_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
- break;
- case 8:
- per_data_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
- break;
- default:
- per_data_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- }
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- dma_cfg->src_info.data_width = mem_data_width;
- dma_cfg->dst_info.data_width = per_data_width;
- } else {
- dma_cfg->src_info.data_width = per_data_width;
- dma_cfg->dst_info.data_width = mem_data_width;
- }
-
- return snd_dmaengine_pcm_request_channel(stedma40_filter, dma_cfg);
-}
-
static int ux500_pcm_prepare_slave_config(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct dma_slave_config *slave_config)
@@ -98,7 +59,6 @@ static int ux500_pcm_prepare_slave_config(struct snd_pcm_substream *substream,
}
static const struct snd_dmaengine_pcm_config ux500_dmaengine_of_pcm_config = {
- .compat_request_channel = ux500_pcm_request_chan,
.prepare_slave_config = ux500_pcm_prepare_slave_config,
};
@@ -107,8 +67,7 @@ int ux500_pcm_register_platform(struct platform_device *pdev)
int ret;
ret = snd_dmaengine_pcm_register(&pdev->dev,
- &ux500_dmaengine_of_pcm_config,
- SND_DMAENGINE_PCM_FLAG_COMPAT);
+ &ux500_dmaengine_of_pcm_config, 0);
if (ret < 0) {
dev_err(&pdev->dev,
"%s: ERROR: Failed to register platform '%s' (%d)!\n",
--
2.39.0