[PATCH] thermal/idle_inject: Support 100% idle injection

[Srinivas Pandruvada]

The users of idle injection framework allow 100% idle injection. For
example: thermal/cpuidle_cooling.c driver. When the ratio set to 100%,
the runtime_duration becomes zero.

In the function idle_inject_set_duration() in idle injection framework
run_duration_us == 0 is silently ignored, without any error (it is a
void function). So, the caller will assume that everything is fine and
100% idle is effective. But in reality the idle inject will be whatever
set before.

There are two options:
- The caller change their max state to 99% instead of 100% and
document that 100% is not supported by idle inject framework
- Support 100% idle support in idle inject framework

Since there are other protections via RT throttling, this framework can
allow 100% idle. The RT throttling will be activated at 95% idle by
default. The caller disabling RT throttling and injecting 100% idle,
should be aware that CPU can't be used at all.

The idle inject timer is started for (run_duration_us + idle_duration_us)
duration. Hence replace (run_duration_us && idle_duration_us) with
(run_duration_us + idle_duration_us) in the function
idle_inject_set_duration(). Also check for !(run_duration_us +
idle_duration_us) to return -EINVAL in the function idle_inject_start().

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
---
Change log:
Compared to RFC/RFT
- Add a pr_debug for 100% idle

 drivers/powercap/idle_inject.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/powercap/idle_inject.c b/drivers/powercap/idle_inject.c
index c57b40477246..3ac81086d71f 100644
--- a/drivers/powercap/idle_inject.c
+++ b/drivers/powercap/idle_inject.c
@@ -170,10 +170,12 @@ void idle_inject_set_duration(struct idle_inject_device *ii_dev,
 			      unsigned int run_duration_us,
 			      unsigned int idle_duration_us)
 {
-	if (run_duration_us && idle_duration_us) {
+	if (run_duration_us + idle_duration_us) {
 		WRITE_ONCE(ii_dev->run_duration_us, run_duration_us);
 		WRITE_ONCE(ii_dev->idle_duration_us, idle_duration_us);
 	}
+	if (!run_duration_us)
+		pr_debug("CPU is forced to 100 percent idle\n");
 }
 EXPORT_SYMBOL_NS_GPL(idle_inject_set_duration, IDLE_INJECT);
 
@@ -219,7 +221,7 @@ int idle_inject_start(struct idle_inject_device *ii_dev)
 	unsigned int idle_duration_us = READ_ONCE(ii_dev->idle_duration_us);
 	unsigned int run_duration_us = READ_ONCE(ii_dev->run_duration_us);
 
-	if (!idle_duration_us || !run_duration_us)
+	if (!(idle_duration_us + run_duration_us))
 		return -EINVAL;
 
 	pr_debug("Starting injecting idle cycles on CPUs '%*pbl'\n",
-- 
2.31.1