Re: [syzbot] KASAN: use-after-free Read in snd_pcm_post_stop

[syzbot]

Hello,

syzbot has tested the proposed patch but the reproducer is still triggering an issue:
KASAN: use-after-free Read in io_fallback_tw

==================================================================
BUG: KASAN: use-after-free in io_fallback_tw+0x6d/0x119 io_uring/io_uring.c:1252
Read of size 8 at addr ffff888070672948 by task syz-executor.0/5596

CPU: 0 PID: 5596 Comm: syz-executor.0 Not tainted 6.2.0-rc3-next-20230112-syzkaller-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106
 print_address_description mm/kasan/report.c:306 [inline]
 print_report+0x15e/0x45d mm/kasan/report.c:417
 kasan_report+0xc0/0xf0 mm/kasan/report.c:517
 io_fallback_tw+0x6d/0x119 io_uring/io_uring.c:1252
 tctx_task_work.cold+0xf/0x2c io_uring/io_uring.c:1222
 task_work_run+0x16f/0x270 kernel/task_work.c:179
 exit_task_work include/linux/task_work.h:38 [inline]
 do_exit+0xb17/0x2a90 kernel/exit.c:867
 do_group_exit+0xd4/0x2a0 kernel/exit.c:1012
 get_signal+0x225f/0x24f0 kernel/signal.c:2859
 arch_do_signal_or_restart+0x79/0x5c0 arch/x86/kernel/signal.c:306
 exit_to_user_mode_loop kernel/entry/common.c:168 [inline]
 exit_to_user_mode_prepare+0x11f/0x240 kernel/entry/common.c:204
 __syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline]
 syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:297
 do_syscall_64+0x46/0xb0 arch/x86/entry/common.c:86
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fee6588c0c9
Code: Unable to access opcode bytes at 0x7fee6588c09f.
RSP: 002b:00007fee66584168 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: fffffffffffffe00 RBX: 00007fee659abf80 RCX: 00007fee6588c0c9
RDX: 0000000000002020 RSI: 00000000200021c0 RDI: 0000000000000006
RBP: 00007fee658e7ae9 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fff6c752b9f R14: 00007fee66584300 R15: 0000000000022000
 </TASK>

Allocated by task 5596:
 kasan_save_stack+0x22/0x40 mm/kasan/common.c:45
 kasan_set_track+0x25/0x30 mm/kasan/common.c:52
 __kasan_slab_alloc+0x7f/0x90 mm/kasan/common.c:325
 kasan_slab_alloc include/linux/kasan.h:186 [inline]
 slab_post_alloc_hook mm/slab.h:769 [inline]
 kmem_cache_alloc_bulk+0x3aa/0x730 mm/slub.c:4033
 __io_alloc_req_refill+0xcc/0x40b io_uring/io_uring.c:1063
 io_alloc_req_refill io_uring/io_uring.h:348 [inline]
 io_submit_sqes.cold+0x7c/0xc2 io_uring/io_uring.c:2415
 __do_sys_io_uring_enter+0x9e4/0x2c10 io_uring/io_uring.c:3439
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Freed by task 2864:
 kasan_save_stack+0x22/0x40 mm/kasan/common.c:45
 kasan_set_track+0x25/0x30 mm/kasan/common.c:52
 kasan_save_free_info+0x2e/0x40 mm/kasan/generic.c:518
 ____kasan_slab_free mm/kasan/common.c:236 [inline]
 ____kasan_slab_free+0x160/0x1c0 mm/kasan/common.c:200
 kasan_slab_free include/linux/kasan.h:162 [inline]
 slab_free_hook mm/slub.c:1781 [inline]
 slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1807
 slab_free mm/slub.c:3787 [inline]
 kmem_cache_free+0xec/0x4e0 mm/slub.c:3809
 io_req_caches_free+0x1c4/0x201 io_uring/io_uring.c:2747
 io_ring_exit_work+0x2e7/0xc80 io_uring/io_uring.c:2977
 process_one_work+0x9bf/0x1750 kernel/workqueue.c:2293
 worker_thread+0x669/0x1090 kernel/workqueue.c:2440
 kthread+0x2e8/0x3a0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308

The buggy address belongs to the object at ffff8880706728c0
 which belongs to the cache io_kiocb of size 224
The buggy address is located 136 bytes inside of
 224-byte region [ffff8880706728c0, ffff8880706729a0)

The buggy address belongs to the physical page:
page:ffffea0001c19c80 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x70672
memcg:ffff888029e25881
flags: 0xfff00000000200(slab|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000000200 ffff88801bf30780 dead000000000122 0000000000000000
raw: 0000000000000000 00000000800c000c 00000001ffffffff ffff888029e25881
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0x112cc0(GFP_USER|__GFP_NOWARN|__GFP_NORETRY), pid 5596, tgid 5595 (syz-executor.0), ts 114425164040, free_ts 101753733828
 prep_new_page mm/page_alloc.c:2549 [inline]
 get_page_from_freelist+0x11bb/0x2d50 mm/page_alloc.c:4324
 __alloc_pages+0x1cb/0x5c0 mm/page_alloc.c:5590
 alloc_pages+0x1aa/0x270 mm/mempolicy.c:2281
 alloc_slab_page mm/slub.c:1851 [inline]
 allocate_slab+0x25f/0x350 mm/slub.c:1998
 new_slab mm/slub.c:2051 [inline]
 ___slab_alloc+0xa91/0x1400 mm/slub.c:3193
 __kmem_cache_alloc_bulk mm/slub.c:3951 [inline]
 kmem_cache_alloc_bulk+0x23d/0x730 mm/slub.c:4026
 __io_alloc_req_refill+0xcc/0x40b io_uring/io_uring.c:1063
 io_alloc_req_refill io_uring/io_uring.h:348 [inline]
 io_submit_sqes.cold+0x7c/0xc2 io_uring/io_uring.c:2415
 __do_sys_io_uring_enter+0x9e4/0x2c10 io_uring/io_uring.c:3439
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
page last free stack trace:
 reset_page_owner include/linux/page_owner.h:24 [inline]
 free_pages_prepare mm/page_alloc.c:1451 [inline]
 free_pcp_prepare+0x4d0/0x910 mm/page_alloc.c:1501
 free_unref_page_prepare mm/page_alloc.c:3387 [inline]
 free_unref_page+0x1d/0x490 mm/page_alloc.c:3482
 qlink_free mm/kasan/quarantine.c:168 [inline]
 qlist_free_all+0x6a/0x170 mm/kasan/quarantine.c:187
 kasan_quarantine_reduce+0x192/0x220 mm/kasan/quarantine.c:294
 __kasan_slab_alloc+0x63/0x90 mm/kasan/common.c:302
 kasan_slab_alloc include/linux/kasan.h:186 [inline]
 slab_post_alloc_hook mm/slab.h:769 [inline]
 slab_alloc_node mm/slub.c:3452 [inline]
 __kmem_cache_alloc_node+0x17c/0x330 mm/slub.c:3491
 __do_kmalloc_node mm/slab_common.c:966 [inline]
 __kmalloc+0x4a/0xd0 mm/slab_common.c:980
 kmalloc include/linux/slab.h:584 [inline]
 tomoyo_realpath_from_path+0xc3/0x600 security/tomoyo/realpath.c:251
 tomoyo_get_realpath security/tomoyo/file.c:151 [inline]
 tomoyo_path_number_perm+0x217/0x570 security/tomoyo/file.c:723
 security_file_ioctl+0x54/0xb0 security/security.c:1624
 __do_sys_ioctl fs/ioctl.c:864 [inline]
 __se_sys_ioctl fs/ioctl.c:856 [inline]
 __x64_sys_ioctl+0xb7/0x210 fs/ioctl.c:856
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Memory state around the buggy address:
 ffff888070672800: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
 ffff888070672880: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
>ffff888070672900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                              ^
 ffff888070672980: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
 ffff888070672a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================


Tested on:

commit:         0a093b28 Add linux-next specific files for 20230112
git tree:       https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
console output: https://syzkaller.appspot.com/x/log.txt?x=1189dc39480000
kernel config:  https://syzkaller.appspot.com/x/.config?x=835f3591019836d5
dashboard link: https://syzkaller.appspot.com/bug?extid=e29d28728f38190cecfc
compiler:       gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2
patch:          https://syzkaller.appspot.com/x/patch.diff?x=1004dc7e480000