[PATCH] e1000e: Add ADP_I219_LM17 to ME S0ix blacklist

[Jiajia Liu]

I219 on HP EliteOne 840 All in One cannot work after s2idle resume
when the link speed is Gigabit, Wake-on-LAN is enabled and then set
the link down before suspend. No issue found when requesting driver
to configure S0ix. Add workround to let ADP_I219_LM17 use the dirver
configured S0ix.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216926
Signed-off-by: Jiajia Liu <liujia6264@xxxxxxxxx>
---

It's regarding the bug above, it looks it's causued by the ME S0ix.
And is there a method to make the ME S0ix path work?

 drivers/net/ethernet/intel/e1000e/netdev.c | 25 ++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 04acd1a992fa..7ee759dbd09d 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -6330,6 +6330,23 @@ static void e1000e_flush_lpic(struct pci_dev *pdev)
 	pm_runtime_put_sync(netdev->dev.parent);
 }
 
+static u16 me_s0ix_blacklist[] = {
+	E1000_DEV_ID_PCH_ADP_I219_LM17,
+	0
+};
+
+static bool e1000e_check_me_s0ix_blacklist(const struct e1000_adapter *adapter)
+{
+	u16 *list;
+
+	for (list = me_s0ix_blacklist; *list; list++) {
+		if (*list == adapter->pdev->device)
+			return true;
+	}
+
+	return false;
+}
+
 /* S0ix implementation */
 static void e1000e_s0ix_entry_flow(struct e1000_adapter *adapter)
 {
@@ -6337,6 +6354,9 @@ static void e1000e_s0ix_entry_flow(struct e1000_adapter *adapter)
 	u32 mac_data;
 	u16 phy_data;
 
+	if (e1000e_check_me_s0ix_blacklist(adapter))
+		goto req_driver;
+
 	if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID &&
 	    hw->mac.type >= e1000_pch_adp) {
 		/* Request ME configure the device for S0ix */
@@ -6346,6 +6366,7 @@ static void e1000e_s0ix_entry_flow(struct e1000_adapter *adapter)
 		trace_e1000e_trace_mac_register(mac_data);
 		ew32(H2ME, mac_data);
 	} else {
+req_driver:
 		/* Request driver configure the device to S0ix */
 		/* Disable the periodic inband message,
 		 * don't request PCIe clock in K1 page770_17[10:9] = 10b
@@ -6488,6 +6509,9 @@ static void e1000e_s0ix_exit_flow(struct e1000_adapter *adapter)
 	u16 phy_data;
 	u32 i = 0;
 
+	if (e1000e_check_me_s0ix_blacklist(adapter))
+		goto req_driver;
+
 	if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID &&
 	    hw->mac.type >= e1000_pch_adp) {
 		/* Keep the GPT clock enabled for CSME */
@@ -6523,6 +6547,7 @@ static void e1000e_s0ix_exit_flow(struct e1000_adapter *adapter)
 		else
 			e_dbg("DPG_EXIT_DONE cleared after %d msec\n", i * 10);
 	} else {
+req_driver:
 		/* Request driver unconfigure the device from S0ix */
 
 		/* Disable the Dynamic Power Gating in the MAC */
-- 
2.30.2