Re: [PATCH V5 0/3] AM68 SK: Add initial support

From: Neha Malcom Francis
Date: Mon Jan 16 2023 - 06:18:27 EST


Hi Sinthu

On 16/01/23 12:44, Sinthu Raja wrote:
From: Sinthu Raja <sinthu.raja@xxxxxx>

Hi All,
This series of patches add support for AM68 Starter kit(SK). AM68 SK
is a low cost, small form factor board designed for TI’s AM68 SoC.

Refer below link to AM68 Technical Reference Manual for further details:
http://www.ti.com/lit/pdf/spruj28

Design files can be referrred from https://www.ti.com/lit/zip/SPRR463

Changes in V5:
=============
Address review comments:
- Remove the unessential comment.
- Remove alignment property from secure-ddr node, as no memory is allocated out
of this region.

Changes in V4:
=============
Repost after rebasing to 6.2 rc1

Changes in V3:
==============
Address all the review comments and the changes are captured in separate patches.
- Remove the unused nodes that are disabled by default.
- Update the gpio regulator node: gpio-regulator-tlv to "regulator-tlv".

V1: https://lore.kernel.org/linux-arm-kernel/20221018123849.23695-1-sinthu.raja@xxxxxx/t/#mbe43b02221733bb6eb06b203359e90ec08406afc
V2: https://lore.kernel.org/lkml/20221107123852.8063-1-sinthu.raja@xxxxxx/
V3: https://lore.kernel.org/lkml/20230110110052.14851-1-sinthu.raja@xxxxxx/
V4: https://lore.kernel.org/lkml/20230105151740.29436-1-sinthu.raja@xxxxxx/

Sinthu Raja (3):
dt-bindings: arm: ti: Add binding for AM68 SK
arm64: dts: ti: Add initial support for AM68 SK System on Module
arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board

.../devicetree/bindings/arm/ti/k3.yaml | 1 +
arch/arm64/boot/dts/ti/Makefile | 2 +
.../boot/dts/ti/k3-am68-sk-base-board.dts | 335 ++++++++++++++++++
arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi | 29 ++
4 files changed, 367 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi


For the series:

Reviewed-by: Neha Malcom Francis <n-francis@xxxxxx>

--
Thanking You
Neha Malcom Francis