RE: [PATCH v2 4/5] dt-bindings: regulator: adi,max77541-regulator.yaml Add MAX77541 Regulator bindings

[Sahin, Okan]

Hi Krzysztof,

Thank you for your feedback and efforts. I also have a few question below.

On Tue, 27 Dec 2022 10:57 AM
Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> wrote:

> On 26/12/2022 23:38, Okan Sahin wrote:
> > The bindings for MAX77541 and MAX77540 regulator drivers.
> 
> 1. Again:
> https://urldefense.com/v3/__https://elixir.bootlin.com/linux/v5.17.1/source/D
> ocumentation/process/submitting-
> patches.rst*L95__;Iw!!A3Ni8CS0y2Y!7nAM0w0tZiMzaqSFijTSs6_FiIcbPVz-
> n0BajxVC1WDh0GfsgL7XoVFoFToHza-Cy2_p8o0UEEc82BOnwgesjPcas_9m$
> 
> 2. Please wrap commit message according to Linux coding style / submission
> process (neither too early nor over the limit):
> https://urldefense.com/v3/__https://elixir.bootlin.com/linux/v5.18-
> rc4/source/Documentation/process/submitting-
> patches.rst*L586__;Iw!!A3Ni8CS0y2Y!7nAM0w0tZiMzaqSFijTSs6_FiIcbPVz-
> n0BajxVC1WDh0GfsgL7XoVFoFToHza-Cy2_p8o0UEEc82BOnwgesjE6sDUk6$
> 
> 3. Subject: drop second, redundant "bindings".
> 
> 
I will update like you suggest. Is there any command that you can advise to check format of commit is suitable or not by using check_patch?
I just added checkpatch into .git/hooks/post-commit file.
> >
> > Signed-off-by: Okan Sahin <okan.sahin@xxxxxxxxxx>
> > ---
> >  .../regulator/adi,max77541-regulator.yaml     | 44 +++++++++++++++++++
> >  MAINTAINERS                                   |  1 +
> >  2 files changed, 45 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/regulator/adi,max77541-regulator.yam
> > l
> >
> > diff --git
> > a/Documentation/devicetree/bindings/regulator/adi,max77541-regulator.y
> > aml
> > b/Documentation/devicetree/bindings/regulator/adi,max77541-regulator.y
> > aml
> > new file mode 100644
> > index 000000000000..67d48bfcb627
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/regulator/adi,max77541-regulat
> > +++ or.yaml
> > @@ -0,0 +1,44 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2
> > +---
> > +$id:
> > +https://urldefense.com/v3/__http://devicetree.org/schemas/regulator/a
> > +di,max77541-
> regulator.yaml*__;Iw!!A3Ni8CS0y2Y!7nAM0w0tZiMzaqSFijTSs6_
> > +FiIcbPVz-n0BajxVC1WDh0GfsgL7XoVFoFToHza-
> Cy2_p8o0UEEc82BOnwgesjKsOQbIb
> > +$
> > +$schema:
> > +https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.y
> > +aml*__;Iw!!A3Ni8CS0y2Y!7nAM0w0tZiMzaqSFijTSs6_FiIcbPVz-
> n0BajxVC1WDh0G
> > +fsgL7XoVFoFToHza-Cy2_p8o0UEEc82BOnwgesjEgbPQFe$
> > +
> > +title: Buck Converter for MAX77540/MAX77541
> > +
> > +maintainers:
> > +  - Okan Sahin <okan.sahin@xxxxxxxxxx>
> > +
> > +description: |
> > +  This is a part of device tree bindings for ADI MAX77540/MAX77541
> > +
> > +  The buck converter is represented as a sub-node of the PMIC node on the
> device tree.
> > +
> > +  The device has two buck regulators.
> > +  See also Documentation/devicetree/bindings/mfd/adi,max77541.yaml
> > + for  additional information and example.
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - adi,max77540-regulator
> > +      - adi,max77541-regulator
> > +
> > +patternProperties:
> > +  "^BUCK[12]$":
> 
> Old DT example was correct - lowercase node names.
Actually, I did not change this part of the patch. I checked other examples, and it looks like using upper case under regulators node seems correct to me. Additionally, there is no warning or error after "make dt_binding_check".
> 
> Best regards,
> Krzysztof

Best regards,
Okan