[PATCH] media: ov5640: Update last busy timestamp to reset autosuspend timer

[Andrey Skvortsov]

Otherwise autosuspend delay doesn't work and power is cut off
immediately as device is freed.

Signed-off-by: Andrey Skvortsov <andrej.skvortzov@xxxxxxxxx>
---
 drivers/media/i2c/ov5640.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index ac35350..f71c0f7 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -1238,6 +1238,7 @@ static int ov5640_write_reg(struct ov5640_dev *sensor, u16 reg, u8 val)
 		return ret;
 	}
 
+	pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
 	return 0;
 }
 
@@ -1305,6 +1306,7 @@ static int ov5640_read_reg(struct ov5640_dev *sensor, u16 reg, u8 *val)
 	}
 
 	*val = buf[0];
+	pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
 	return 0;
 }
 
@@ -3615,6 +3617,7 @@ static int ov5640_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
 		break;
 	}
 
+	pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
 	pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
 
 	return 0;
@@ -3702,6 +3705,7 @@ static int ov5640_s_ctrl(struct v4l2_ctrl *ctrl)
 		break;
 	}
 
+	pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
 	pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
 
 	return ret;
@@ -4034,8 +4038,10 @@ static int ov5640_s_stream(struct v4l2_subdev *sd, int enable)
 out:
 	mutex_unlock(&sensor->lock);
 
-	if (!enable || ret)
+	if (!enable || ret) {
+		pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
 		pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
+	}
 
 	return ret;
 }
@@ -4203,6 +4209,7 @@ static int ov5640_probe(struct i2c_client *client)
 
 	pm_runtime_set_autosuspend_delay(dev, 1000);
 	pm_runtime_use_autosuspend(dev);
+	pm_runtime_mark_last_busy(dev);
 	pm_runtime_put_autosuspend(dev);
 
 	return 0;