Re: [PATCH] spi: dw: Fix wrong FIFO level setting for long xfers

[Andy Shevchenko]

On Fri, Jan 13, 2023 at 6:57 PM Serge Semin
<Sergey.Semin@xxxxxxxxxxxxxxxxxxxx> wrote:
>
> Due to using the u16 type in the min_t() macros the SPI transfer length
> will be cast to word before participating in the conditional statement
> implied by the macro. Thus if the transfer length is greater than 64KB the
> Tx/Rx FIFO threshold level value will be determined by the leftover of the
> truncated after the type-case length. In the worst case it will cause
> having the "Tx FIFO Empty" or "Rx FIFO Full" interrupts triggered on each
> word sent/received to/from the bus. In its turn it will cause the
> dramatical performance drop.
>
> The problem can be easily fixed by using the min() macros instead of
> min_t() which doesn't imply any type casting thus preventing the possible
> data loss.

But this would be problematic if the types of the parameters are different.
Currently they are u32 vs. unsigned int. I would rather assume that
FIFO length is always less than or equal to 64K and just change the
type in min_t to follow what dws->tx_len is.

-- 
With Best Regards,
Andy Shevchenko