Re: [PATCH V3 04/21] PCI: tegra194: Handle errors in BPMP response

[Lorenzo Pieralisi]

On Fri, Oct 14, 2022 at 12:08:37AM +0530, Vidya Sagar wrote:
> The return value from tegra_bpmp_transfer indicates the success or
> failure of the IPC transaction with BPMP. If the transaction
> succeeded, we also need to check the actual command's result code.
> Add code to do this.
> 
> Signed-off-by: Vidya Sagar <vidyas@xxxxxxxxxx>
> ---
> V3:
> * None
> 
> V2:
> * None
> 
>  drivers/pci/controller/dwc/pcie-tegra194.c | 18 ++++++++++++++++--
>  1 file changed, 16 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
> index 685aee378c93..ae7e0d8f693b 100644
> --- a/drivers/pci/controller/dwc/pcie-tegra194.c
> +++ b/drivers/pci/controller/dwc/pcie-tegra194.c
> @@ -1260,6 +1260,7 @@ static int tegra_pcie_bpmp_set_ctrl_state(struct tegra_pcie_dw *pcie,
>  	struct mrq_uphy_response resp;
>  	struct tegra_bpmp_message msg;
>  	struct mrq_uphy_request req;
> +	int err;
>  
>  	/*
>  	 * Controller-5 doesn't need to have its state set by BPMP-FW in
> @@ -1282,7 +1283,13 @@ static int tegra_pcie_bpmp_set_ctrl_state(struct tegra_pcie_dw *pcie,
>  	msg.rx.data = &resp;
>  	msg.rx.size = sizeof(resp);
>  
> -	return tegra_bpmp_transfer(pcie->bpmp, &msg);
> +	err = tegra_bpmp_transfer(pcie->bpmp, &msg);
> +	if (err)
> +		return err;
> +	if (msg.rx.ret)
> +		return -EINVAL;
> +
> +	return 0;
>  }
>  
>  static int tegra_pcie_bpmp_set_pll_state(struct tegra_pcie_dw *pcie,
> @@ -1291,6 +1298,7 @@ static int tegra_pcie_bpmp_set_pll_state(struct tegra_pcie_dw *pcie,
>  	struct mrq_uphy_response resp;
>  	struct tegra_bpmp_message msg;
>  	struct mrq_uphy_request req;
> +	int err;
>  
>  	memset(&req, 0, sizeof(req));
>  	memset(&resp, 0, sizeof(resp));
> @@ -1310,7 +1318,13 @@ static int tegra_pcie_bpmp_set_pll_state(struct tegra_pcie_dw *pcie,
>  	msg.rx.data = &resp;
>  	msg.rx.size = sizeof(resp);
>  
> -	return tegra_bpmp_transfer(pcie->bpmp, &msg);
> +	err = tegra_bpmp_transfer(pcie->bpmp, &msg);
> +	if (err)
> +		return err;
> +	if (msg.rx.ret)
> +		return -EINVAL;

I wonder whether you can embed the return value check within
the function itself.

Lorenzo

> +
> +	return 0;
>  }
>  
>  static void tegra_pcie_downstream_dev_to_D0(struct tegra_pcie_dw *pcie)
> -- 
> 2.17.1
> 
> 
> -- 
> linux-phy mailing list
> linux-phy@xxxxxxxxxxxxxxxxxxx
> https://lists.infradead.org/mailman/listinfo/linux-phy