Re: [PATCH] USB: serial: option: add Quectel EC200U modem

[Johan Hovold]

On Wed, Dec 28, 2022 at 03:08:47PM +0330, Ali Mirghasemi wrote:
> Add support for EC200U modem
> 
> 0x0901: EC200U - AT + AP + CP + NMEA + DIAG + MOS
>
> usb-device output:
> T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
> D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=2c7c ProdID=0901 Rev= 3.18
> S: Manufacturer=Android
> S: Product=Android
> C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA
> A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
> I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
> I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
> I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
> E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=83(I) Atr=03(Int.) MxPS= 512 Ivl=4096ms
> I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=89(I) Atr=03(Int.) MxPS= 512 Ivl=4096ms
> I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> 
> Signed-off-by: Ali Mirghasemi <ali.mirghasemi1376@xxxxxxxxx>
> ---

Thanks for the update, looks good.

In the future when you send new revisions you should include a short
changelog here below the --- line (so that it doesn't end up in the git
log).

You should also add a version number to your Subject (e.g. "[PATCH v2]:
USB: ...").

And for my enlightenment, could you spell out what AP, CP and MOS stands
for (or what they are used for)?

Now applied.

Johan