Re: [PATCH 2/2] arm64: dts: qcom: sa8450p-pmics: rename pmic labels

[Konrad Dybcio]

On 11.01.2023 09:23, Johan Hovold wrote:
> The SA8540P PMICs are named PMM8540. Rename the devicetree source labels
> to reflect this.
> 
> Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
>  arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi | 24 ++++++++++-----------
>  1 file changed, 12 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi
> index 8c393f0bd6a8..1221be89b3de 100644
> --- a/arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi
> @@ -8,7 +8,7 @@
>  #include <dt-bindings/spmi/spmi.h>
>  
>  &spmi_bus {
> -	pm8450a: pmic@0 {
> +	pmm8540a: pmic@0 {
>  		compatible = "qcom,pm8150", "qcom,spmi-pmic";
>  		reg = <0x0 SPMI_USID>;
>  		#address-cells = <1>;
> @@ -22,62 +22,62 @@ rtc@6000 {
>  			wakeup-source;
>  		};
>  
> -		pm8450a_gpios: gpio@c000 {
> +		pmm8540a_gpios: gpio@c000 {
>  			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
>  			reg = <0xc000>;
>  			gpio-controller;
> -			gpio-ranges = <&pm8450a_gpios 0 0 10>;
> +			gpio-ranges = <&pmm8540a_gpios 0 0 10>;
>  			#gpio-cells = <2>;
>  			interrupt-controller;
>  			#interrupt-cells = <2>;
>  		};
>  	};
>  
> -	pm8450c: pmic@4 {
> +	pmm8540c: pmic@4 {
>  		compatible = "qcom,pm8150", "qcom,spmi-pmic";
>  		reg = <0x4 SPMI_USID>;
>  		#address-cells = <1>;
>  		#size-cells = <0>;
>  
> -		pm8450c_gpios: gpio@c000 {
> +		pmm8540c_gpios: gpio@c000 {
>  			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
>  			reg = <0xc000>;
>  			gpio-controller;
> -			gpio-ranges = <&pm8450c_gpios 0 0 10>;
> +			gpio-ranges = <&pmm8540c_gpios 0 0 10>;
>  			#gpio-cells = <2>;
>  			interrupt-controller;
>  			#interrupt-cells = <2>;
>  		};
>  	};
>  
> -	pm8450e: pmic@8 {
> +	pmm8540e: pmic@8 {
>  		compatible = "qcom,pm8150", "qcom,spmi-pmic";
>  		reg = <0x8 SPMI_USID>;
>  		#address-cells = <1>;
>  		#size-cells = <0>;
>  
> -		pm8450e_gpios: gpio@c000 {
> +		pmm8540e_gpios: gpio@c000 {
>  			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
>  			reg = <0xc000>;
>  			gpio-controller;
> -			gpio-ranges = <&pm8450e_gpios 0 0 10>;
> +			gpio-ranges = <&pmm8540e_gpios 0 0 10>;
>  			#gpio-cells = <2>;
>  			interrupt-controller;
>  			#interrupt-cells = <2>;
>  		};
>  	};
>  
> -	pm8450g: pmic@c {
> +	pmm8540g: pmic@c {
>  		compatible = "qcom,pm8150", "qcom,spmi-pmic";
>  		reg = <0xc SPMI_USID>;
>  		#address-cells = <1>;
>  		#size-cells = <0>;
>  
> -		pm8450g_gpios: gpio@c000 {
> +		pmm8540g_gpios: gpio@c000 {
>  			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
>  			reg = <0xc000>;
>  			gpio-controller;
> -			gpio-ranges = <&pm8450g_gpios 0 0 10>;
> +			gpio-ranges = <&pmm8540g_gpios 0 0 10>;
>  			#gpio-cells = <2>;
>  			interrupt-controller;
>  			#interrupt-cells = <2>;