Re: [PATCH v4 net-next 0/5] add PLCA RS support and onsemi NCN26000

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net-next.git (master)
by David S. Miller <davem@xxxxxxxxxxxxx>:

On Mon, 9 Jan 2023 17:59:25 +0100 you wrote:
> This patchset adds support for getting/setting the Physical Layer
> Collision Avoidace (PLCA) Reconciliation Sublayer (RS) configuration and
> status on Ethernet PHYs that supports it.
> 
> PLCA is a feature that provides improved media-access performance in terms
> of throughput, latency and fairness for multi-drop (P2MP) half-duplex PHYs.
> PLCA is defined in Clause 148 of the IEEE802.3 specifications as amended
> by 802.3cg-2019. Currently, PLCA is supported by the 10BASE-T1S single-pair
> Ethernet PHY defined in the same standard and related amendments. The OPEN
> Alliance SIG TC14 defines additional specifications for the 10BASE-T1S PHY,
> including a standard register map for PHYs that embeds the PLCA RS (see
> PLCA management registers at https://www.opensig.org/about/specifications/).
> 
> [...]

Here is the summary with links:
  - [v4,net-next,1/5] net/ethtool: add netlink interface for the PLCA RS
    https://git.kernel.org/netdev/net-next/c/8580e16c28f3
  - [v4,net-next,2/5] drivers/net/phy: add the link modes for the 10BASE-T1S Ethernet PHY
    https://git.kernel.org/netdev/net-next/c/16178c8ef53d
  - [v4,net-next,3/5] drivers/net/phy: add connection between ethtool and phylib for PLCA
    https://git.kernel.org/netdev/net-next/c/a23a1e57a677
  - [v4,net-next,4/5] drivers/net/phy: add helpers to get/set PLCA configuration
    https://git.kernel.org/netdev/net-next/c/493323416fed
  - [v4,net-next,5/5] drivers/net/phy: add driver for the onsemi NCN26000 10BASE-T1S PHY
    https://git.kernel.org/netdev/net-next/c/b53e7e8d8557

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html