[PATCH 3/3] usb: typec: altmodes/displayport: Use proper macro for pin assignment check

[Prashant Malani]

While looking at the DP configuration VDO to determine the peripheral
configuration, the spec (Table 8-5: DisplayPort Configurations, VESA
DisplayPort Alt Mode Standard v2.0) lists the options as "UFP_U as a DP
Source/Sink Device".

So, use the correct macro while performing this check. Effectively it's
the same as the existing code, but the proposed macro describes the
state a little better.

No functional changes introduced.

Cc: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Signed-off-by: Prashant Malani <pmalani@xxxxxxxxxxxx>
---
 drivers/usb/typec/altmodes/displayport.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c
index c0d65c93cefe..746bfbf3d557 100644
--- a/drivers/usb/typec/altmodes/displayport.c
+++ b/drivers/usb/typec/altmodes/displayport.c
@@ -426,7 +426,7 @@ static const char * const pin_assignments[] = {
  */
 static u8 get_current_pin_assignments(struct dp_altmode *dp)
 {
-	if (DP_CONF_CURRENTLY(dp->data.conf) == DP_CONF_DFP_D)
+	if (DP_CONF_CURRENTLY(dp->data.conf) == DP_CONF_UFP_U_AS_DFP_D)
 		return DP_CAP_PIN_ASSIGN_DFP_D(dp->alt->vdo);
 	else
 		return DP_CAP_PIN_ASSIGN_UFP_D(dp->alt->vdo);
-- 
2.39.0.314.g84b9a713c41-goog