Re: [PATCH v2 05/15] spi: dw: Introduce enhanced mem_op

[Serge Semin]

On Mon, Dec 12, 2022 at 06:07:22PM +0000, Sudip Mukherjee wrote:
> If the DW_SPI_CAP_EMODE capability is enabled then dw_spi_exec_enh_mem_op()
> will be used as the new enhanced mem_op. Lets initialize the buffer and
> get the pointers to receive and transmit data buffers.
> The DW_SPI_CAP_EMODE capability will be enabled in a later patch.
> 
> Signed-off-by: Sudip Mukherjee <sudip.mukherjee@xxxxxxxxxx>
> ---
>  drivers/spi/spi-dw-core.c | 53 ++++++++++++++++++++++++++++++++++++---
>  1 file changed, 50 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c
> index 49fad58ceb94a..89438ae2df17d 100644
> --- a/drivers/spi/spi-dw-core.c
> +++ b/drivers/spi/spi-dw-core.c
> @@ -798,6 +798,51 @@ static int dw_spi_exec_mem_op(struct spi_mem *mem, const struct spi_mem_op *op)
>  	return ret;
>  }
>  
> +static void dw_spi_init_enh_mem_buf(struct dw_spi *dws, const struct spi_mem_op *op)
> +{
> +	unsigned int i, j;
> +	u8 *out;
> +

> +	out = dws->buf;
> +	for (i = 0; i < DW_SPI_BUF_SIZE; ++i)
> +		out[i] = 0;
> +
> +	for (i = 0, j = op->cmd.nbytes; i < op->cmd.nbytes; ++i, --j)
> +		out[i] = DW_SPI_GET_BYTE(op->cmd.opcode, op->cmd.nbytes - j);
> +
> +	for (j = op->addr.nbytes, i = dws->reg_io_width; j > 0; ++i, --j)
> +		out[i] = DW_SPI_GET_BYTE(op->addr.val, op->addr.nbytes - j);

In case of the non-eSPI implementation the outbound data consolidation
was required to get the most optimal loop of data transfer. In this
case I don't see it was required since the clock stretching feature is
available and the IRQ-based xfer procedure is implemented. Do I miss
something?

-Serge(y)

> +
> +	dws->n_bytes = 1;
> +	if (op->data.dir == SPI_MEM_DATA_IN) {
> +		dws->rx = op->data.buf.in;
> +		dws->rx_len = op->data.nbytes;
> +		dws->tx = NULL;
> +		dws->tx_len = 0;
> +	} else if (op->data.dir == SPI_MEM_DATA_OUT) {
> +		dws->tx_len = op->data.nbytes;
> +		dws->tx = (void *)op->data.buf.out;
> +		dws->rx = NULL;
> +		dws->rx_len = 0;
> +	} else {
> +		dws->rx = NULL;
> +		dws->rx_len = 0;
> +		dws->tx = NULL;
> +		dws->tx_len = 0;
> +	}
> +}
> +
> +static int dw_spi_exec_enh_mem_op(struct spi_mem *mem, const struct spi_mem_op *op)
> +{
> +	struct spi_controller *ctlr = mem->spi->controller;
> +	struct dw_spi *dws = spi_controller_get_devdata(ctlr);
> +
> +	/* Collect cmd and addr into a single buffer */
> +	dw_spi_init_enh_mem_buf(dws, op);
> +
> +	return 0;
> +}
> +
>  /*
>   * Initialize the default memory operations if a glue layer hasn't specified
>   * custom ones. Direct mapping operations will be preserved anyway since DW SPI
> @@ -812,11 +857,13 @@ static void dw_spi_init_mem_ops(struct dw_spi *dws)
>  	if (!dws->mem_ops.exec_op && !(dws->caps & DW_SPI_CAP_CS_OVERRIDE) &&
>  	    !dws->set_cs) {
>  		dws->mem_ops.adjust_op_size = dw_spi_adjust_mem_op_size;
> -		if (dws->caps & DW_SPI_CAP_EMODE)
> +		if (dws->caps & DW_SPI_CAP_EMODE) {
> +			dws->mem_ops.exec_op = dw_spi_exec_enh_mem_op;
>  			dws->mem_ops.supports_op = dw_spi_supports_enh_mem_op;
> -		else
> +		} else {
> +			dws->mem_ops.exec_op = dw_spi_exec_mem_op;
>  			dws->mem_ops.supports_op = dw_spi_supports_mem_op;
> -		dws->mem_ops.exec_op = dw_spi_exec_mem_op;
> +		}
>  		if (!dws->max_mem_freq)
>  			dws->max_mem_freq = dws->max_freq;
>  	}
> -- 
> 2.30.2
>