Re: [PATCH] arm64: dts: marvell: AC5/AC5X: Fix address for UART1

[Gregory CLEMENT]

Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx> writes:

> Hi All,
>
> On 15/12/22 15:54, Chris Packham wrote:
>> The correct address offset is 0x12100.
>>
>> Fixes: 31be791e26cf ("arm64: dts: marvell: Add UART1-3 for AC5/AC5X")
>> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
>> ---
>> Not sure how this happened. I only noticed when I had a conflict in some
>> local patches I was rebasing against upstream. So I obviously had it
>> right at one point but then managed to break it in the process of
>> cleaning things up for submission.
>
> I know people have probably been away with various holidays but I think 
> it's been long enough so....
>
> ping?


Applied on mvebu/fixes

Thanks,

Gregory

>
>>
>>   arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi | 2 +-
>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
>> index 7308f7b6b22c..8bce64069138 100644
>> --- a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
>> +++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
>> @@ -98,7 +98,7 @@ uart0: serial@12000 {
>>   
>>   			uart1: serial@12100 {
>>   				compatible = "snps,dw-apb-uart";
>> -				reg = <0x11000 0x100>;
>> +				reg = <0x12100 0x100>;
>>   				reg-shift = <2>;
>>   				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
>>   				reg-io-width = <1>;

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com