Re: [PATCH net-next 08/11] sfc: implement device status related vdpa config operations
From: Gautam Dawar
Date: Mon Jan 09 2023 - 05:24:08 EST
On 12/14/22 12:15, Jason Wang wrote:
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
On Wed, Dec 7, 2022 at 10:57 PM Gautam Dawar <gautam.dawar@xxxxxxx> wrote:
vDPA config opertions to handle get/set device status and device
reset have been implemented.
Signed-off-by: Gautam Dawar <gautam.dawar@xxxxxxx>
---
drivers/net/ethernet/sfc/ef100_vdpa.c | 7 +-
drivers/net/ethernet/sfc/ef100_vdpa.h | 1 +
drivers/net/ethernet/sfc/ef100_vdpa_ops.c | 133 ++++++++++++++++++++++
3 files changed, 140 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/sfc/ef100_vdpa.c b/drivers/net/ethernet/sfc/ef100_vdpa.c
index 04d64bfe3c93..80bca281a748 100644
--- a/drivers/net/ethernet/sfc/ef100_vdpa.c
+++ b/drivers/net/ethernet/sfc/ef100_vdpa.c
@@ -225,9 +225,14 @@ static int vdpa_allocate_vis(struct efx_nic *efx, unsigned int *allocated_vis)
static void ef100_vdpa_delete(struct efx_nic *efx)
{
+ struct vdpa_device *vdpa_dev;
+
if (efx->vdpa_nic) {
+ vdpa_dev = &efx->vdpa_nic->vdpa_dev;
+ ef100_vdpa_reset(vdpa_dev);
Any reason we need to reset during delete?
ef100_reset_vdpa_device() does the necessary clean-up including freeing
irqs, deleting filters and deleting the vrings which is required while
removing the vdpa device or unloading the driver.
+
/* replace with _vdpa_unregister_device later */
- put_device(&efx->vdpa_nic->vdpa_dev.dev);
+ put_device(&vdpa_dev->dev);
efx->vdpa_nic = NULL;
}
efx_mcdi_free_vis(efx);
diff --git a/drivers/net/ethernet/sfc/ef100_vdpa.h b/drivers/net/ethernet/sfc/ef100_vdpa.h
index a33edd6dda12..1b0bbba88154 100644
--- a/drivers/net/ethernet/sfc/ef100_vdpa.h
+++ b/drivers/net/ethernet/sfc/ef100_vdpa.h
@@ -186,6 +186,7 @@ int ef100_vdpa_add_filter(struct ef100_vdpa_nic *vdpa_nic,
enum ef100_vdpa_mac_filter_type type);
int ef100_vdpa_irq_vectors_alloc(struct pci_dev *pci_dev, u16 nvqs);
void ef100_vdpa_irq_vectors_free(void *data);
+int ef100_vdpa_reset(struct vdpa_device *vdev);
static inline bool efx_vdpa_is_little_endian(struct ef100_vdpa_nic *vdpa_nic)
{
diff --git a/drivers/net/ethernet/sfc/ef100_vdpa_ops.c b/drivers/net/ethernet/sfc/ef100_vdpa_ops.c
index 132ddb4a647b..718b67f6da90 100644
--- a/drivers/net/ethernet/sfc/ef100_vdpa_ops.c
+++ b/drivers/net/ethernet/sfc/ef100_vdpa_ops.c
@@ -251,6 +251,62 @@ static bool is_qid_invalid(struct ef100_vdpa_nic *vdpa_nic, u16 idx,
return false;
}
+static void ef100_reset_vdpa_device(struct ef100_vdpa_nic *vdpa_nic)
+{
+ int i;
+
+ WARN_ON(!mutex_is_locked(&vdpa_nic->lock));
+
+ if (!vdpa_nic->status)
+ return;
+
+ vdpa_nic->vdpa_state = EF100_VDPA_STATE_INITIALIZED;
+ vdpa_nic->status = 0;
+ vdpa_nic->features = 0;
+ for (i = 0; i < (vdpa_nic->max_queue_pairs * 2); i++)
+ reset_vring(vdpa_nic, i);
+}
+
+/* May be called under the rtnl lock */
+int ef100_vdpa_reset(struct vdpa_device *vdev)
+{
+ struct ef100_vdpa_nic *vdpa_nic = get_vdpa_nic(vdev);
+
+ /* vdpa device can be deleted anytime but the bar_config
+ * could still be vdpa and hence efx->state would be STATE_VDPA.
+ * Accordingly, ensure vdpa device exists before reset handling
+ */
+ if (!vdpa_nic)
+ return -ENODEV;
+
+ mutex_lock(&vdpa_nic->lock);
+ ef100_reset_vdpa_device(vdpa_nic);
+ mutex_unlock(&vdpa_nic->lock);
+ return 0;
+}
+
+static int start_vdpa_device(struct ef100_vdpa_nic *vdpa_nic)
+{
+ int rc = 0;
+ int i, j;
+
+ for (i = 0; i < (vdpa_nic->max_queue_pairs * 2); i++) {
+ if (can_create_vring(vdpa_nic, i)) {
+ rc = create_vring(vdpa_nic, i);
So I think we can safely remove the create_vring() in set_vq_ready()
since it's undefined behaviour if set_vq_ready() is called after
DRIVER_OK.
Is this (undefined) behavior documented in the virtio spec? If so, can
you please point me to the section of virtio spec that calls this order
(set_vq_ready() after setting DRIVER_OK) undefined? Is it just that the
queue can't be enabled after DRIVER_OK or the reverse (disabling the
queue) after DRIVER_OK is not allowed?
+ if (rc)
+ goto clear_vring;
+ }
+ }
+ vdpa_nic->vdpa_state = EF100_VDPA_STATE_STARTED;
+ return rc;
+
+clear_vring:
+ for (j = 0; j < i; j++)
+ if (vdpa_nic->vring[j].vring_created)
+ delete_vring(vdpa_nic, j);
+ return rc;
+}
+
static int ef100_vdpa_set_vq_address(struct vdpa_device *vdev,
u16 idx, u64 desc_area, u64 driver_area,
u64 device_area)
@@ -568,6 +624,80 @@ static u32 ef100_vdpa_get_vendor_id(struct vdpa_device *vdev)
return EF100_VDPA_VENDOR_ID;
}
+static u8 ef100_vdpa_get_status(struct vdpa_device *vdev)
+{
+ struct ef100_vdpa_nic *vdpa_nic = get_vdpa_nic(vdev);
+ u8 status;
+
+ mutex_lock(&vdpa_nic->lock);
+ status = vdpa_nic->status;
+ mutex_unlock(&vdpa_nic->lock);
+ return status;
+}
+
+static void ef100_vdpa_set_status(struct vdpa_device *vdev, u8 status)
+{
+ struct ef100_vdpa_nic *vdpa_nic = get_vdpa_nic(vdev);
+ u8 new_status;
+ int rc;
+
+ mutex_lock(&vdpa_nic->lock);
+ if (!status) {
+ dev_info(&vdev->dev,
+ "%s: Status received is 0. Device reset being done\n",
+ __func__);
+ ef100_reset_vdpa_device(vdpa_nic);
+ goto unlock_return;
+ }
+ new_status = status & ~vdpa_nic->status;
+ if (new_status == 0) {
+ dev_info(&vdev->dev,
+ "%s: New status same as current status\n", __func__);
+ goto unlock_return;
+ }
+ if (new_status & VIRTIO_CONFIG_S_FAILED) {
+ ef100_reset_vdpa_device(vdpa_nic);
+ goto unlock_return;
+ }
+
+ if (new_status & VIRTIO_CONFIG_S_ACKNOWLEDGE &&
+ vdpa_nic->vdpa_state == EF100_VDPA_STATE_INITIALIZED) {
As replied before, I think there's no need to check
EF100_VDPA_STATE_INITIALIZED, otherwise it could be a bug somewhere.
Ok. Will remove the check against EF100_VDPA_STATE_INITIALIZED.
+ vdpa_nic->status |= VIRTIO_CONFIG_S_ACKNOWLEDGE;
+ new_status &= ~VIRTIO_CONFIG_S_ACKNOWLEDGE;
+ }
+ if (new_status & VIRTIO_CONFIG_S_DRIVER &&
+ vdpa_nic->vdpa_state == EF100_VDPA_STATE_INITIALIZED) {
+ vdpa_nic->status |= VIRTIO_CONFIG_S_DRIVER;
+ new_status &= ~VIRTIO_CONFIG_S_DRIVER;
+ }
+ if (new_status & VIRTIO_CONFIG_S_FEATURES_OK &&
+ vdpa_nic->vdpa_state == EF100_VDPA_STATE_INITIALIZED) {
+ vdpa_nic->status |= VIRTIO_CONFIG_S_FEATURES_OK;
+ vdpa_nic->vdpa_state = EF100_VDPA_STATE_NEGOTIATED;
I think we can simply map EF100_VDPA_STATE_NEGOTIATED to
VIRTIO_CONFIG_S_FEATURES_OK.
E.g the code doesn't fail the feature negotiation by clearing the
VIRTIO_CONFIG_S_FEATURES_OK when ef100_vdpa_set_driver_feature fails?
Ok.
Thanks
Regards,
Gautam