Re: [PATCH] clk: sunxi-ng: h3/h5: Model H3 CLK_DRAM as a fixed clock

[Jernej Škrabec]

Dne četrtek, 29. december 2022 ob 05:22:30 CET je Samuel Holland napisal(a):
> The DRAM controller clock is only allowed to change frequency while the
> DRAM chips are in self-refresh. To support this, changes to the CLK_DRAM
> mux and divider have no effect until acknowledged by the memory dynamic
> frequency scaling (MDFS) hardware inside the DRAM controller. (There is
> a SDRCLK_UPD bit in DRAM_CFG_REG which should serve a similar purpose,
> but this bit actually does nothing.)
> 
> However, the MDFS hardware in H3 appears to be broken. Triggering a
> frequency change using the procedure from similar SoCs (A64/H5) hangs
> the hardware. Additionally, the vendor BSP specifically avoids using the
> MDFS hardware on H3, instead performing all DRAM PHY parameter updates
> and resets in software.
> 
> Thus, it is effectively impossible to change the CLK_DRAM mux/divider,
> so those features should not be modeled. Add CLK_SET_RATE_PARENT so
> frequency changes apply to PLL_DDR instead.
> 
> Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx>

Applied, thanks!

Best regards,
Jernej