[PATCH v6 6/6] arm64: dts: qcom: sm6125: Initial support for xiaomi-laurel-sprout
From: Lux Aliaga
Date: Sun Jan 08 2023 - 14:56:23 EST
Add support for the Xiaomi Mi A3 (xiaomi-laurel-sprout). Here's a
summary on what's defined.
- dmesg output to bootloader preconfigured display
- USB
- UFS
- SD card
- SMD RPM regulators
- Volume Up, Down and Power buttons
- Thermistors
Signed-off-by: Lux Aliaga <they@xxxxxxxxx>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../dts/qcom/sm6125-xiaomi-laurel-sprout.dts | 424 ++++++++++++++++++
2 files changed, 425 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 3e79496292e7..2b2a0170db14 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -157,6 +157,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm6375-sony-xperia-murray-pdx225.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts
new file mode 100644
index 000000000000..7ff18f481060
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Lux Aliaga <they@xxxxxxxxx>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "sm6125.dtsi"
+#include "pm6125.dtsi"
+
+/ {
+ model = "Xiaomi Mi A3";
+ compatible = "xiaomi,laurel-sprout", "qcom,sm6125";
+ chassis-type = "handset";
+
+ /* required for bootloader to select correct board */
+ qcom,msm-id = <394 0>; /* sm6125 v1 */
+ qcom,board-id = <11 0>;
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer0: framebuffer@5c000000 {
+ compatible = "simple-framebuffer";
+ reg = <0 0x5c000000 0 (1560 * 720 * 4)>;
+ width = <720>;
+ height = <1560>;
+ stride = <(720 * 4)>;
+ format = "a8r8g8b8";
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ debug_mem: debug@ffb00000 {
+ reg = <0x0 0xffb00000 0x0 0xc0000>;
+ no-map;
+ };
+
+ last_log_mem: lastlog@ffbc0000 {
+ reg = <0x0 0xffbc0000 0x0 0x80000>;
+ no-map;
+ };
+
+ pstore_mem: ramoops@ffc00000 {
+ compatible = "ramoops";
+ reg = <0x0 0xffc40000 0x0 0xc0000>;
+ record-size = <0x1000>;
+ console-size = <0x40000>;
+ msg-size = <0x20000 0x20000>;
+ };
+
+ cmdline_mem: memory@ffd00000 {
+ reg = <0x0 0xffd40000 0x0 0x1000>;
+ no-map;
+ };
+ };
+
+ extcon_usb: usb-id {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&vol_up_n>;
+ pinctrl-names = "default";
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&pm6125_gpio 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ wakeup-source;
+ };
+ };
+
+ thermal-zones {
+ rf-pa0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm6125_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ quiet-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <5000>;
+ thermal-sensors = <&pm6125_adc_tm 1>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ xo-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm6125_adc_tm 2>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+};
+
+&hsusb_phy1 {
+ vdd-supply = <&vreg_l7a>;
+ vdda-pll-supply = <&vreg_l10a>;
+ vdda-phy-dpdm-supply = <&vreg_l15a>;
+ status = "okay";
+};
+
+&pm6125_adc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm>;
+
+ adc-chan@4d {
+ reg = <ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "rf_pa0_therm";
+ };
+
+ adc-chan@4e {
+ reg = <ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "quiet_therm";
+ };
+
+ adc-chan@52 {
+ reg = <ADC5_GPIO1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "camera_flash_therm";
+ };
+
+ adc-chan@54 {
+ reg = <ADC5_GPIO3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "emmc_ufs_therm";
+ };
+};
+
+&pm6125_adc_tm {
+ status = "okay";
+
+ rf-pa0-therm@0 {
+ reg = <0>;
+ io-channels = <&pm6125_adc ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ quiet-therm@1 {
+ reg = <1>;
+ io-channels = <&pm6125_adc ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ xo-therm@2 {
+ reg = <2>;
+ io-channels = <&pm6125_adc ADC5_XO_THERM_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
+&pm6125_gpio {
+ camera_flash_therm: camera-flash-therm-state {
+ pins = "gpio3";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ bias-high-impedance;
+ };
+
+ emmc_ufs_therm: emmc-ufs-therm-state {
+ pins = "gpio6";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ bias-high-impedance;
+ };
+
+ vol_up_n: vol-up-n-state {
+ pins = "gpio5";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ input-enable;
+ bias-pull-up;
+ };
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ status = "okay";
+ linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&rpm_requests {
+ regulators-0 {
+ compatible = "qcom,rpm-pm6125-regulators";
+
+ vreg_s6a: s6 {
+ regulator-min-microvolt = <936000>;
+ regulator-max-microvolt = <1422000>;
+ };
+
+ vreg_l1a: l1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1256000>;
+ };
+
+ vreg_l2a: l2 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1056000>;
+ };
+
+ vreg_l3a: l3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1064000>;
+ };
+
+ vreg_l4a: l4 {
+ regulator-min-microvolt = <872000>;
+ regulator-max-microvolt = <976000>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l5a: l5 {
+ regulator-min-microvolt = <1648000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l6a: l6 {
+ regulator-min-microvolt = <576000>;
+ regulator-max-microvolt = <656000>;
+ };
+
+ vreg_l7a: l7 {
+ regulator-min-microvolt = <872000>;
+ regulator-max-microvolt = <976000>;
+ };
+
+ vreg_l8a: l8 {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <728000>;
+ };
+
+ vreg_l9a: l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1896000>;
+ };
+
+ vreg_l10a: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1896000>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l11a: l11 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1952000>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l12a: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1996000>;
+ };
+
+ vreg_l13a: l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1832000>;
+ };
+
+ vreg_l14a: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1904000>;
+ };
+
+ vreg_l15a: l15 {
+ regulator-min-microvolt = <3104000>;
+ regulator-max-microvolt = <3232000>;
+ };
+
+ vreg_l16a: l16 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1904000>;
+ };
+
+ vreg_l17a: l17 {
+ regulator-min-microvolt = <1248000>;
+ regulator-max-microvolt = <1304000>;
+ };
+
+ vreg_l18a: l18 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1264000>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l19a: l19 {
+ regulator-min-microvolt = <1648000>;
+ regulator-max-microvolt = <2952000>;
+ };
+
+ vreg_l20a: l20 {
+ regulator-min-microvolt = <1648000>;
+ regulator-max-microvolt = <2952000>;
+ };
+
+ vreg_l21a: l21 {
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <2856000>;
+ };
+
+ vreg_l22a: l22 {
+ regulator-min-microvolt = <2944000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l23a: l23 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3400000>;
+ };
+
+ vreg_l24a: l24 {
+ regulator-min-microvolt = <2944000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ };
+ };
+};
+
+&sdc2_off_state {
+ sd-cd-pins {
+ pins = "gpio98";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&sdc2_on_state {
+ sd-cd-pins {
+ pins = "gpio98";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
+
+&sdhc_2 {
+ cd-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
+ vmmc-supply = <&vreg_l22a>;
+ vqmmc-supply = <&vreg_l5a>;
+ no-sdio;
+ no-mmc;
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <22 2>, <28 6>;
+};
+
+&ufs_mem_hc {
+ vcc-supply = <&vreg_l24a>;
+ vccq2-supply = <&vreg_l11a>;
+ vcc-max-microamp = <600000>;
+ vccq2-max-microamp = <600000>;
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l4a>;
+ vdda-pll-supply = <&vreg_l10a>;
+ vdda-phy-max-microamp = <51400>;
+ vdda-pll-max-microamp = <14200>;
+ vddp-ref-clk-supply = <&vreg_l18a>;
+ status = "okay";
+};
+
+&usb3 {
+ status = "okay";
+};
+
+&usb3_dwc3 {
+ extcon = <&extcon_usb>;
+};
--
2.39.0