Re: [PATCH 2/2] arm64: dts: qcom: ipq8074: correct USB3 QMP PHY-s clock output names

[Dmitry Baryshkov]

On Sun, 8 Jan 2023 at 15:04, Robert Marko <robimarko@xxxxxxxxx> wrote:
>
> It seems that clock-output-names for the USB3 QMP PHY-s where set without
> actually checking what is the GCC clock driver expecting, so clock core
> could never actually find the parents for usb0_pipe_clk_src and
> usb1_pipe_clk_src clocks in the GCC driver.
>
> So, correct the names to be what the driver expects so that parenting
> works.
>
> Before:
> gcc_usb0_pipe_clk_src                0        0        0   125000000          0     0  50000         Y
> gcc_usb1_pipe_clk_src                0        0        0   125000000          0     0  50000         Y
>
> After:
>  usb3phy_0_cc_pipe_clk                1        1        0   125000000          0     0  50000         Y
>     usb0_pipe_clk_src                 1        1        0   125000000          0     0  50000         Y
>        gcc_usb0_pipe_clk              1        1        0   125000000          0     0  50000         Y
>  usb3phy_1_cc_pipe_clk                1        1        0   125000000          0     0  50000         Y
>     usb1_pipe_clk_src                 1        1        0   125000000          0     0  50000         Y
>        gcc_usb1_pipe_clk              1        1        0   125000000          0     0  50000         Y
>
> Fixes: 5e09bc51d07b ("arm64: dts: ipq8074: enable USB support")
> Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>

Nevertheless, could you please add .fw_name to these entries in gcc
driver (as you did for other clocks in 35dc8e101a8e ("clk: qcom:
ipq8074: populate fw_name for all parents")) and add all pipe clocks
to the gcc node? This way you can drop clock-output-names from the PHY
nodes.

> ---
>  arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

[skipped]

-- 
With best wishes
Dmitry