Re: [PATCH v6 8/8] media: i2c: add DS90UB953 driver

From: Laurent Pinchart
Date: Sat Jan 07 2023 - 23:23:28 EST


Hi Tomi,

Thank you for the patch.

I won't repeat here the comments made on 7/8 that also apply to this
patch.

On Thu, Jan 05, 2023 at 04:03:07PM +0200, Tomi Valkeinen wrote:
> Add driver for TI DS90UB953 FPD-Link III Serializer.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
> ---
> drivers/media/i2c/Kconfig | 13 +
> drivers/media/i2c/Makefile | 1 +
> drivers/media/i2c/ds90ub953.c | 1590 +++++++++++++++++++++++++++++++++
> 3 files changed, 1604 insertions(+)
> create mode 100644 drivers/media/i2c/ds90ub953.c
>
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index eb312d6e9cf6..29594c724307 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -1614,6 +1614,19 @@ config VIDEO_DS90UB913
> Device driver for the Texas Instruments DS90UB913
> FPD-Link III Serializer.
>
> +config VIDEO_DS90UB953
> + tristate "TI DS90UB953 Serializer"

I'd mention the DS90UB971 too.

> + depends on OF && I2C && VIDEO_DEV
> + select MEDIA_CONTROLLER
> + select VIDEO_V4L2_SUBDEV_API
> + select V4L2_FWNODE
> + select REGMAP_I2C
> + select OF_GPIO
> + select I2C_ATR
> + help
> + Device driver for the Texas Instruments DS90UB953
> + FPD-Link III Serializer and DS90UB971 FPD-Link IV Serializer.
> +
> config VIDEO_DS90UB960
> tristate "TI DS90UB960 Deserializer"
> depends on OF && I2C && VIDEO_DEV
> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> index c4875ec8c3b9..efd5f717a5f7 100644
> --- a/drivers/media/i2c/Makefile
> +++ b/drivers/media/i2c/Makefile
> @@ -143,4 +143,5 @@ obj-$(CONFIG_VIDEO_VS6624) += vs6624.o
> obj-$(CONFIG_VIDEO_WM8739) += wm8739.o
> obj-$(CONFIG_VIDEO_WM8775) += wm8775.o
> obj-$(CONFIG_VIDEO_DS90UB913) += ds90ub913.o
> +obj-$(CONFIG_VIDEO_DS90UB953) += ds90ub953.o
> obj-$(CONFIG_VIDEO_DS90UB960) += ds90ub960.o
> diff --git a/drivers/media/i2c/ds90ub953.c b/drivers/media/i2c/ds90ub953.c
> new file mode 100644
> index 000000000000..251dc8e8adfa
> --- /dev/null
> +++ b/drivers/media/i2c/ds90ub953.c
> @@ -0,0 +1,1590 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Driver for the Texas Instruments DS90UB953 video serializer
> + *
> + * Based on a driver from Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
> + *
> + * Copyright (c) 2019 Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
> + * Copyright (c) 2022 Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/gpio/driver.h>
> +#include <linux/i2c-atr.h>
> +#include <linux/i2c.h>
> +#include <linux/kernel.h>
> +#include <linux/math64.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_graph.h>
> +#include <linux/rational.h>
> +#include <linux/regmap.h>
> +
> +#include <media/i2c/ds90ub9xx.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-event.h>
> +#include <media/v4l2-subdev.h>
> +
> +#define UB953_PAD_SINK 0
> +#define UB953_PAD_SOURCE 1
> +
> +#define UB953_NUM_GPIOS 4
> +
> +#define UB953_REG_RESET_CTL 0x01
> +#define UB953_REG_RESET_CTL_DIGITAL_RESET_1 BIT(1)
> +#define UB953_REG_RESET_CTL_DIGITAL_RESET_0 BIT(0)
> +
> +#define UB953_REG_GENERAL_CFG 0x02
> +#define UB953_REG_GENERAL_CFG_CONT_CLK BIT(6)
> +#define UB953_REG_GENERAL_CFG_CSI_LANE_SEL_SHIFT 4
> +#define UB953_REG_GENERAL_CFG_CSI_LANE_SEL_MASK GENMASK(5, 4)
> +#define UB953_REG_GENERAL_CFG_CRC_TX_GEN_ENABLE BIT(1)
> +#define UB953_REG_GENERAL_CFG_I2C_STRAP_MODE BIT(0)
> +
> +#define UB953_REG_MODE_SEL 0x03
> +#define UB953_REG_MODE_SEL_MODE_DONE BIT(3)
> +#define UB953_REG_MODE_SEL_MODE_OVERRIDE BIT(4)
> +#define UB953_REG_MODE_SEL_MODE_MASK GENMASK(2, 0)
> +
> +#define UB953_REG_CLKOUT_CTRL0 0x06
> +#define UB953_REG_CLKOUT_CTRL1 0x07
> +
> +#define UB953_REG_SCL_HIGH_TIME 0x0B
> +#define UB953_REG_SCL_LOW_TIME 0x0C
> +
> +#define UB953_REG_LOCAL_GPIO_DATA 0x0d
> +#define UB953_REG_LOCAL_GPIO_DATA_GPIO_RMTEN(n) BIT(4 + (n))
> +#define UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(n) BIT(0 + (n))
> +
> +#define UB953_REG_GPIO_INPUT_CTRL 0x0e
> +#define UB953_REG_GPIO_INPUT_CTRL_OUT_EN(n) BIT(4 + (n))
> +#define UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(n) BIT(0 + (n))
> +
> +#define UB953_REG_REV_MASK_ID 0x50
> +#define UB953_REG_GENERAL_STATUS 0x52
> +
> +#define UB953_REG_GPIO_PIN_STS 0x53
> +#define UB953_REG_GPIO_PIN_STS_GPIO_STS(n) BIT(0 + (n))
> +
> +#define UB953_REG_BIST_ERR_CNT 0x54
> +#define UB953_REG_CRC_ERR_CNT1 0x55
> +#define UB953_REG_CRC_ERR_CNT2 0x56
> +
> +#define UB953_REG_CSI_ERR_CNT 0x5c
> +#define UB953_REG_CSI_ERR_STATUS 0x5D
> +#define UB953_REG_CSI_ERR_DLANE01 0x5E
> +#define UB953_REG_CSI_ERR_DLANE23 0x5F
> +#define UB953_REG_CSI_ERR_CLK_LANE 0x60
> +#define UB953_REG_CSI_PKT_HDR_VC_ID 0x61
> +#define UB953_REG_PKT_HDR_WC_LSB 0x62
> +#define UB953_REG_PKT_HDR_WC_MSB 0x63
> +#define UB953_REG_CSI_ECC 0x64
> +
> +#define UB953_REG_IND_ACC_CTL 0xb0
> +#define UB953_REG_IND_ACC_ADDR 0xb1
> +#define UB953_REG_IND_ACC_DATA 0xb2
> +
> +#define UB953_REG_FPD3_RX_ID(n) (0xf0 + (n))
> +
> +/* Indirect register blocks */
> +#define UB953_IND_TARGET_PAT_GEN 0x00
> +#define UB953_IND_TARGET_FPD3_TX 0x01
> +#define UB953_IND_TARGET_DIE_ID 0x02
> +
> +#define UB953_IND_PGEN_CTL 0x01
> +#define UB953_IND_PGEN_CTL_PGEN_ENABLE BIT(0)
> +#define UB953_IND_PGEN_CFG 0x02
> +#define UB953_IND_PGEN_CSI_DI 0x03
> +#define UB953_IND_PGEN_LINE_SIZE1 0x04
> +#define UB953_IND_PGEN_LINE_SIZE0 0x05
> +#define UB953_IND_PGEN_BAR_SIZE1 0x06
> +#define UB953_IND_PGEN_BAR_SIZE0 0x07
> +#define UB953_IND_PGEN_ACT_LPF1 0x08
> +#define UB953_IND_PGEN_ACT_LPF0 0x09
> +#define UB953_IND_PGEN_TOT_LPF1 0x0A
> +#define UB953_IND_PGEN_TOT_LPF0 0x0B
> +#define UB953_IND_PGEN_LINE_PD1 0x0C
> +#define UB953_IND_PGEN_LINE_PD0 0x0D
> +#define UB953_IND_PGEN_VBP 0x0E
> +#define UB953_IND_PGEN_VFP 0x0F
> +#define UB953_IND_PGEN_COLOR(n) (0x10 + (n)) /* n <= 15 */
> +
> +/* Note: Only sync mode supported for now */
> +enum ub953_mode {
> + /* FPD-Link III CSI-2 synchronous mode */
> + UB953_MODE_SYNC,
> + /* FPD-Link III CSI-2 non-synchronous mode, external ref clock */
> + UB953_MODE_NONSYNC_EXT,
> + /* FPD-Link III CSI-2 non-synchronous mode, internal ref clock */
> + UB953_MODE_NONSYNC_INT,
> + /* FPD-Link III DVP mode */
> + UB953_MODE_DVP,
> +};
> +
> +struct ub953_hw_data {
> + const char *model;
> + bool ub971;

Maybe is_ub971, although a model enum could be nicer. Up to you.

> +};
> +
> +struct ub953_data {
> + const struct ub953_hw_data *hw_data;
> +
> + struct i2c_client *client;
> + struct regmap *regmap;
> +
> + u32 num_data_lanes;
> +
> + struct gpio_chip gpio_chip;
> + char gpio_chip_name[64];
> +
> + struct v4l2_subdev sd;
> + struct media_pad pads[2];
> +
> + struct v4l2_async_notifier notifier;
> +
> + struct v4l2_subdev *source_sd;
> +
> + struct v4l2_ctrl_handler ctrl_handler;
> +
> + u64 enabled_source_streams;
> +
> + struct device_node *tx_ep_np;
> +
> + /* lock for register access */
> + struct mutex reg_lock;

Why is this needed, can you access registers from multiple contexts ?

> +
> + u8 current_indirect_target;
> +
> + struct clk_hw clkout_clk_hw;
> +
> + enum ub953_mode mode;
> +
> + struct ds90ub9xx_platform_data *plat_data;
> +};
> +
> +static inline struct ub953_data *sd_to_ub953(struct v4l2_subdev *sd)
> +{
> + return container_of(sd, struct ub953_data, sd);
> +}
> +
> +/*
> + * HW Access
> + */
> +
> +static int ub953_read(struct ub953_data *priv, u8 reg, u8 *val)
> +{
> + unsigned int v;
> + int ret;
> +
> + mutex_lock(&priv->reg_lock);
> +
> + ret = regmap_read(priv->regmap, reg, &v);
> + if (ret)
> + dev_err(&priv->client->dev,
> + "Cannot read register 0x%02x: %d!\n", reg, ret);
> + else
> + *val = v;
> +
> + mutex_unlock(&priv->reg_lock);
> +
> + return ret;
> +}
> +
> +static int ub953_write(struct ub953_data *priv, u8 reg, u8 val)
> +{
> + int ret;
> +
> + mutex_lock(&priv->reg_lock);
> +
> + ret = regmap_write(priv->regmap, reg, val);
> + if (ret)
> + dev_err(&priv->client->dev,
> + "Cannot write register 0x%02x: %d!\n", reg, ret);
> +
> + mutex_unlock(&priv->reg_lock);
> +
> + return ret;
> +}
> +
> +static int _ub953_select_ind_reg_block(struct ub953_data *priv, u8 block)
> +{
> + struct device *dev = &priv->client->dev;
> + int ret;
> +
> + if (priv->current_indirect_target == block)
> + return 0;
> +
> + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_CTL, block << 2);
> + if (ret) {
> + dev_err(dev, "%s: cannot select indirect target %u (%d)!\n",
> + __func__, block, ret);
> + return ret;
> + }
> +
> + priv->current_indirect_target = block;
> +
> + return 0;
> +}
> +
> +__maybe_unused

Looks like it's more than maybe unused, it's never used at all. Can the
function be dropped ?

> +static int ub953_read_ind(struct ub953_data *priv, u8 block, u8 reg, u8 *val)
> +{
> + unsigned int v;
> + int ret;
> +
> + mutex_lock(&priv->reg_lock);
> +
> + ret = _ub953_select_ind_reg_block(priv, block);
> + if (ret)
> + goto out;
> +
> + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_ADDR, reg);
> + if (ret)
> + goto out;
> +
> + ret = regmap_read(priv->regmap, UB953_REG_IND_ACC_DATA, &v);
> + if (ret)
> + goto out;
> +
> + *val = v;
> +
> +out:
> + mutex_unlock(&priv->reg_lock);
> +
> + return ret;
> +}
> +
> +static int ub953_write_ind(struct ub953_data *priv, u8 block, u8 reg, u8 val)
> +{
> + int ret;
> +
> + mutex_lock(&priv->reg_lock);
> +
> + ret = _ub953_select_ind_reg_block(priv, block);
> + if (ret)
> + goto out;
> +
> + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_ADDR, reg);
> + if (ret)
> + goto out;
> +
> + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_DATA, val);
> +
> +out:
> + mutex_unlock(&priv->reg_lock);
> +

An error message would be useful on failure. Same in the next function.

> + return ret;
> +}
> +
> +static int ub953_write_ind16(struct ub953_data *priv, u8 block, u8 reg, u16 val)
> +{
> + int ret;
> +
> + mutex_lock(&priv->reg_lock);
> +
> + ret = _ub953_select_ind_reg_block(priv, block);
> + if (ret)
> + goto out;
> +
> + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_ADDR, reg);
> + if (ret)
> + goto out;
> +
> + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_DATA, val >> 8);
> + if (ret)
> + goto out;
> +
> + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_ADDR, reg + 1);

There's no auto-increment ? :-(

> + if (ret)
> + goto out;
> +
> + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_DATA, val & 0xff);
> + if (ret)
> + goto out;
> +
> +out:
> + mutex_unlock(&priv->reg_lock);
> +
> + return ret;
> +}
> +
> +/*
> + * GPIO chip
> + */
> +static int ub953_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
> +{
> + struct ub953_data *priv = gpiochip_get_data(gc);
> + int ret;
> + u8 v;
> +
> + ret = ub953_read(priv, UB953_REG_GPIO_INPUT_CTRL, &v);
> + if (ret)
> + return ret;
> +
> + if (v & UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(offset))
> + return GPIO_LINE_DIRECTION_IN;
> + else
> + return GPIO_LINE_DIRECTION_OUT;
> +}
> +
> +static int ub953_gpio_direction_in(struct gpio_chip *gc, unsigned int offset)
> +{
> + struct ub953_data *priv = gpiochip_get_data(gc);
> +
> + return regmap_update_bits(
> + priv->regmap, UB953_REG_GPIO_INPUT_CTRL,
> + UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(offset) |
> + UB953_REG_GPIO_INPUT_CTRL_OUT_EN(offset),
> + UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(offset));
> +}
> +
> +static int ub953_gpio_direction_out(struct gpio_chip *gc, unsigned int offset,
> + int value)
> +{
> + struct ub953_data *priv = gpiochip_get_data(gc);
> + int ret;
> +
> + ret = regmap_update_bits(
> + priv->regmap, UB953_REG_LOCAL_GPIO_DATA,
> + UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset),
> + value ? UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset) : 0);
> +
> + if (ret)
> + return ret;
> +
> + return regmap_update_bits(
> + priv->regmap, UB953_REG_GPIO_INPUT_CTRL,
> + UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(offset) |
> + UB953_REG_GPIO_INPUT_CTRL_OUT_EN(offset),
> + UB953_REG_GPIO_INPUT_CTRL_OUT_EN(offset));
> +}
> +
> +static int ub953_gpio_get(struct gpio_chip *gc, unsigned int offset)
> +{
> + struct ub953_data *priv = gpiochip_get_data(gc);
> + int ret;
> + u8 v;
> +
> + ret = ub953_read(priv, UB953_REG_GPIO_PIN_STS, &v);
> + if (ret)
> + return ret;
> +
> + return !!(v & UB953_REG_GPIO_PIN_STS_GPIO_STS(offset));
> +}
> +
> +static void ub953_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
> +{
> + struct ub953_data *priv = gpiochip_get_data(gc);
> +
> + regmap_update_bits(
> + priv->regmap, UB953_REG_LOCAL_GPIO_DATA,
> + UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset),
> + value ? UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset) : 0);
> +}
> +
> +static int ub953_gpio_of_xlate(struct gpio_chip *gc,
> + const struct of_phandle_args *gpiospec,
> + u32 *flags)
> +{
> + if (flags)
> + *flags = gpiospec->args[1];
> +
> + return gpiospec->args[0];
> +}
> +
> +static int ub953_gpiochip_probe(struct ub953_data *priv)
> +{
> + struct device *dev = &priv->client->dev;
> + struct gpio_chip *gc = &priv->gpio_chip;
> + int ret;
> +
> + /* Set all GPIOs to local input mode */
> + ub953_write(priv, UB953_REG_LOCAL_GPIO_DATA, 0);
> + ub953_write(priv, UB953_REG_GPIO_INPUT_CTRL, 0xf);
> +
> + scnprintf(priv->gpio_chip_name, sizeof(priv->gpio_chip_name), "%s",
> + dev_name(dev));
> +
> + gc->label = priv->gpio_chip_name;
> + gc->parent = dev;
> + gc->owner = THIS_MODULE;
> + gc->base = -1;
> + gc->can_sleep = 1;
> + gc->ngpio = UB953_NUM_GPIOS;
> + gc->get_direction = ub953_gpio_get_direction;
> + gc->direction_input = ub953_gpio_direction_in;
> + gc->direction_output = ub953_gpio_direction_out;
> + gc->get = ub953_gpio_get;
> + gc->set = ub953_gpio_set;
> + gc->of_xlate = ub953_gpio_of_xlate;
> + gc->of_node = priv->client->dev.of_node;
> + gc->of_gpio_n_cells = 2;
> +
> + ret = gpiochip_add_data(gc, priv);
> + if (ret) {
> + dev_err(dev, "Failed to add GPIOs: %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static void ub953_gpiochip_remove(struct ub953_data *priv)
> +{
> + gpiochip_remove(&priv->gpio_chip);
> +}
> +
> +/*
> + * V4L2
> + */
> +
> +static int _ub953_set_routing(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state,
> + struct v4l2_subdev_krouting *routing)
> +{
> + static const struct v4l2_mbus_framefmt format = {
> + .width = 640,
> + .height = 480,
> + .code = MEDIA_BUS_FMT_UYVY8_1X16,
> + .field = V4L2_FIELD_NONE,
> + .colorspace = V4L2_COLORSPACE_SRGB,
> + .ycbcr_enc = V4L2_YCBCR_ENC_601,
> + .quantization = V4L2_QUANTIZATION_LIM_RANGE,
> + .xfer_func = V4L2_XFER_FUNC_SRGB,
> + };
> + int ret;
> +
> + /*
> + * Note: we can only support up to V4L2_FRAME_DESC_ENTRY_MAX, until
> + * frame desc is made dynamically allocated.
> + */
> +
> + if (routing->num_routes > V4L2_FRAME_DESC_ENTRY_MAX)
> + return -EINVAL;
> +
> + ret = v4l2_subdev_routing_validate(sd, routing,
> + V4L2_SUBDEV_ROUTING_ONLY_1_TO_1);
> + if (ret)
> + return ret;
> +
> + ret = v4l2_subdev_set_routing_with_fmt(sd, state, routing, &format);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int ub953_set_routing(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state,
> + enum v4l2_subdev_format_whence which,
> + struct v4l2_subdev_krouting *routing)
> +{
> + struct ub953_data *priv = sd_to_ub953(sd);
> +
> + if (which == V4L2_SUBDEV_FORMAT_ACTIVE && priv->enabled_source_streams)
> + return -EBUSY;
> +
> + return _ub953_set_routing(sd, state, routing);
> +}
> +
> +static int ub953_get_source_frame_desc(struct ub953_data *priv,
> + struct v4l2_mbus_frame_desc *desc)
> +{
> + struct media_pad *pad;
> + int ret;
> +
> + pad = media_pad_remote_pad_first(&priv->pads[UB953_PAD_SINK]);
> + if (!pad)
> + return -EPIPE;
> +
> + ret = v4l2_subdev_call(priv->source_sd, pad, get_frame_desc, pad->index,
> + desc);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int ub953_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad,
> + struct v4l2_mbus_frame_desc *fd)
> +{
> + struct ub953_data *priv = sd_to_ub953(sd);
> + const struct v4l2_subdev_krouting *routing;
> + struct v4l2_mbus_frame_desc source_fd;
> + struct v4l2_subdev_route *route;
> + struct v4l2_subdev_state *state;
> + int ret;
> +
> + if (pad != UB953_PAD_SOURCE)
> + return -EINVAL;
> +
> + ret = ub953_get_source_frame_desc(priv, &source_fd);
> + if (ret)
> + return ret;
> +
> + state = v4l2_subdev_lock_and_get_active_state(sd);
> +
> + routing = &state->routing;
> +
> + memset(fd, 0, sizeof(*fd));
> +
> + fd->type = V4L2_MBUS_FRAME_DESC_TYPE_CSI2;
> +
> + for_each_active_route(routing, route) {
> + struct v4l2_mbus_frame_desc_entry *source_entry = NULL;
> + unsigned int i;
> +
> + if (route->source_pad != pad)
> + continue;
> +
> + for (i = 0; i < source_fd.num_entries; ++i)
> + if (source_fd.entry[i].stream == route->sink_stream) {
> + source_entry = &source_fd.entry[i];
> + break;
> + }
> +
> + if (!source_entry) {
> + dev_err(&priv->client->dev,
> + "Failed to find stream from source frame desc\n");
> + ret = -EPIPE;
> + goto out;
> + }
> +
> + fd->entry[fd->num_entries].stream = route->source_stream;
> + fd->entry[fd->num_entries].flags = source_entry->flags;
> + fd->entry[fd->num_entries].length = source_entry->length;
> + fd->entry[fd->num_entries].pixelcode = source_entry->pixelcode;
> + fd->entry[fd->num_entries].bus.csi2.vc =
> + source_entry->bus.csi2.vc;
> + fd->entry[fd->num_entries].bus.csi2.dt =
> + source_entry->bus.csi2.dt;
> +
> + fd->num_entries++;
> + }
> +
> +out:
> + v4l2_subdev_unlock_state(state);
> +
> + return ret;
> +}
> +
> +static int ub953_set_fmt(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state,
> + struct v4l2_subdev_format *format)
> +{
> + struct ub953_data *priv = sd_to_ub953(sd);
> + struct v4l2_mbus_framefmt *fmt;
> +
> + if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE &&
> + priv->enabled_source_streams)
> + return -EBUSY;
> +
> + /* No transcoding, source and sink formats must match. */
> + if (format->pad == UB953_PAD_SOURCE)
> + return v4l2_subdev_get_fmt(sd, state, format);
> +
> + /* Set sink format */
> + fmt = v4l2_subdev_state_get_stream_format(state, format->pad,
> + format->stream);
> + if (!fmt)
> + return -EINVAL;
> +
> + *fmt = format->format;
> +
> + /* Propagate to source format */
> + fmt = v4l2_subdev_state_get_opposite_stream_format(state, format->pad,
> + format->stream);
> + if (!fmt)
> + return -EINVAL;
> +
> + *fmt = format->format;
> +
> + return 0;
> +}
> +
> +static int ub953_init_cfg(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state)
> +{
> + struct v4l2_subdev_route routes[] = {
> + {
> + .sink_pad = UB953_PAD_SINK,
> + .sink_stream = 0,
> + .source_pad = UB953_PAD_SOURCE,
> + .source_stream = 0,
> + .flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE,
> + },
> + };
> +
> + struct v4l2_subdev_krouting routing = {
> + .num_routes = ARRAY_SIZE(routes),
> + .routes = routes,
> + };
> +
> + return _ub953_set_routing(sd, state, &routing);
> +}
> +
> +static int ub953_log_status(struct v4l2_subdev *sd)
> +{
> + struct ub953_data *priv = sd_to_ub953(sd);
> + struct device *dev = &priv->client->dev;
> + u8 v = 0, v1 = 0, v2 = 0;
> + unsigned int i;
> + char id[7];
> + u8 gpio_local_data;
> + u8 gpio_input_ctrl;
> + u8 gpio_pin_sts;
> +
> + for (i = 0; i < 6; ++i)
> + ub953_read(priv, UB953_REG_FPD3_RX_ID(i), &id[i]);
> + id[6] = 0;
> +
> + dev_info(dev, "ID '%s'\n", id);
> +
> + ub953_read(priv, UB953_REG_GENERAL_STATUS, &v);
> + dev_info(dev, "GENERAL_STATUS %#x\n", v);
> +
> + ub953_read(priv, UB953_REG_CRC_ERR_CNT1, &v1);
> + ub953_read(priv, UB953_REG_CRC_ERR_CNT2, &v2);
> + dev_info(dev, "CRC error count %u\n", v1 | (v2 << 8));
> +
> + ub953_read(priv, UB953_REG_CSI_ERR_CNT, &v);
> + dev_info(dev, "CSI error count %u\n", v);
> +
> + ub953_read(priv, UB953_REG_CSI_ERR_STATUS, &v);
> + dev_info(dev, "CSI_ERR_STATUS %#x\n", v);
> +
> + ub953_read(priv, UB953_REG_CSI_ERR_DLANE01, &v);
> + dev_info(dev, "CSI_ERR_DLANE01 %#x\n", v);
> +
> + ub953_read(priv, UB953_REG_CSI_ERR_DLANE23, &v);
> + dev_info(dev, "CSI_ERR_DLANE23 %#x\n", v);
> +
> + ub953_read(priv, UB953_REG_CSI_ERR_CLK_LANE, &v);
> + dev_info(dev, "CSI_ERR_CLK_LANE %#x\n", v);
> +
> + ub953_read(priv, UB953_REG_CSI_PKT_HDR_VC_ID, &v);
> + dev_info(dev, "CSI packet header VC %u ID %u\n", v >> 6, v & 0x3f);
> +
> + ub953_read(priv, UB953_REG_PKT_HDR_WC_LSB, &v1);
> + ub953_read(priv, UB953_REG_PKT_HDR_WC_MSB, &v2);
> + dev_info(dev, "CSI packet header WC %u\n", (v2 << 8) | v1);
> +
> + ub953_read(priv, UB953_REG_CSI_ECC, &v);
> + dev_info(dev, "CSI ECC %#x\n", v);
> +
> + ub953_read(priv, UB953_REG_LOCAL_GPIO_DATA, &gpio_local_data);
> + ub953_read(priv, UB953_REG_GPIO_INPUT_CTRL, &gpio_input_ctrl);
> + ub953_read(priv, UB953_REG_GPIO_PIN_STS, &gpio_pin_sts);
> +
> + for (i = 0; i < UB953_NUM_GPIOS; ++i) {
> + dev_info(dev,
> + "GPIO%u: remote: %u is_input: %u is_output: %u val: %u sts: %u\n",
> + i,
> + !!(gpio_local_data & UB953_REG_LOCAL_GPIO_DATA_GPIO_RMTEN(i)),
> + !!(gpio_input_ctrl & UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(i)),
> + !!(gpio_input_ctrl & UB953_REG_GPIO_INPUT_CTRL_OUT_EN(i)),
> + !!(gpio_local_data & UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(i)),
> + !!(gpio_pin_sts & UB953_REG_GPIO_PIN_STS_GPIO_STS(i)));
> + }
> +
> + return 0;
> +}
> +
> +static int ub953_enable_streams(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state, u32 pad,
> + u64 streams_mask)
> +{
> + struct ub953_data *priv = sd_to_ub953(sd);
> + struct media_pad *remote_pad;
> + u64 sink_streams;
> + int ret;
> +
> + if (streams_mask & priv->enabled_source_streams)
> + return -EALREADY;
> +
> + sink_streams = v4l2_subdev_state_xlate_streams(
> + state, UB953_PAD_SOURCE, UB953_PAD_SINK, &streams_mask);
> +
> + remote_pad = media_pad_remote_pad_first(&priv->pads[UB953_PAD_SINK]);
> +
> + ret = v4l2_subdev_enable_streams(priv->source_sd, remote_pad->index,
> + sink_streams);
> + if (ret)
> + return ret;
> +
> + priv->enabled_source_streams |= streams_mask;
> +
> + return 0;
> +}
> +
> +static int ub953_disable_streams(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state, u32 pad,
> + u64 streams_mask)
> +{
> + struct ub953_data *priv = sd_to_ub953(sd);
> + struct media_pad *remote_pad;
> + int ret;
> + u64 sink_streams;
> +
> + if ((streams_mask & priv->enabled_source_streams) != streams_mask)
> + return -EALREADY;
> +
> + sink_streams = v4l2_subdev_state_xlate_streams(
> + state, UB953_PAD_SOURCE, UB953_PAD_SINK, &streams_mask);
> +
> + remote_pad = media_pad_remote_pad_first(&priv->pads[UB953_PAD_SINK]);
> +
> + ret = v4l2_subdev_disable_streams(priv->source_sd, remote_pad->index,
> + sink_streams);
> + if (ret)
> + return ret;
> +
> + priv->enabled_source_streams &= ~streams_mask;
> +
> + return 0;
> +}
> +
> +static const struct v4l2_subdev_pad_ops ub953_pad_ops = {
> + .enable_streams = ub953_enable_streams,
> + .disable_streams = ub953_disable_streams,
> + .set_routing = ub953_set_routing,
> + .get_frame_desc = ub953_get_frame_desc,
> + .get_fmt = v4l2_subdev_get_fmt,
> + .set_fmt = ub953_set_fmt,
> + .init_cfg = ub953_init_cfg,
> +};
> +
> +static const struct v4l2_subdev_core_ops ub953_subdev_core_ops = {
> + .log_status = ub953_log_status,
> + .subscribe_event = v4l2_ctrl_subdev_subscribe_event,
> + .unsubscribe_event = v4l2_event_subdev_unsubscribe,

Align the = for all structures or for none.

> +};
> +
> +static const struct v4l2_subdev_ops ub953_subdev_ops = {
> + .core = &ub953_subdev_core_ops,
> + .pad = &ub953_pad_ops,
> +};
> +
> +static const struct media_entity_operations ub953_entity_ops = {
> + .link_validate = v4l2_subdev_link_validate,
> +};
> +
> +enum {
> + TEST_PATTERN_DISABLED = 0,
> + TEST_PATTERN_V_COLOR_BARS_1,
> + TEST_PATTERN_V_COLOR_BARS_2,
> + TEST_PATTERN_V_COLOR_BARS_4,
> + TEST_PATTERN_V_COLOR_BARS_8,
> +};
> +
> +static const char *const ub953_tpg_qmenu[] = {
> + "Disabled",
> + "1 vertical color bar",
> + "2 vertical color bars",
> + "4 vertical color bars",
> + "8 vertical color bars",
> +};
> +
> +static int ub953_enable_tpg(struct ub953_data *priv, int tpg_num)
> +{
> + struct v4l2_subdev *sd = &priv->sd;
> + struct v4l2_subdev_state *state;
> + struct v4l2_mbus_framefmt *fmt;
> + u8 vbp, vfp;
> + u16 blank_lines;
> + u16 width;
> + u16 height;
> +
> + u16 bytespp = 2; /* For MEDIA_BUS_FMT_UYVY8_1X16 */
> + u8 cbars_idx = tpg_num - TEST_PATTERN_V_COLOR_BARS_1;
> + u8 num_cbars = 1 << cbars_idx;
> +
> + u16 line_size; /* Line size [bytes] */
> + u16 bar_size; /* cbar size [bytes] */
> + u16 act_lpf; /* active lines/frame */
> + u16 tot_lpf; /* tot lines/frame */
> + u16 line_pd; /* Line period in 10-ns units */
> +
> + u16 fps = 30;
> +
> + vbp = 33;
> + vfp = 10;
> + blank_lines = vbp + vfp + 2; /* total blanking lines */
> +
> + state = v4l2_subdev_get_locked_active_state(sd);
> +
> + if (state->routing.num_routes != 1)
> + return -EINVAL;
> +
> + fmt = v4l2_subdev_state_get_stream_format(state, UB953_PAD_SOURCE, 0);
> + if (!fmt)
> + return -EINVAL;
> +
> + if (fmt->code != MEDIA_BUS_FMT_UYVY8_1X16)
> + return -EINVAL;
> +
> + width = fmt->width;
> + height = fmt->height;
> +
> + line_size = width * bytespp;
> + bar_size = line_size / num_cbars;
> + act_lpf = height;
> + tot_lpf = act_lpf + blank_lines;
> + line_pd = 100000000 / fps / tot_lpf;
> +
> + ub953_write_ind(priv, UB953_IND_TARGET_PAT_GEN, UB953_IND_PGEN_CTL,
> + UB953_IND_PGEN_CTL_PGEN_ENABLE);
> +
> + /* YUV422 8bit: 2 bytes/block, CSI-2 data type 0x1e */
> + ub953_write_ind(priv, UB953_IND_TARGET_PAT_GEN, UB953_IND_PGEN_CFG,
> + cbars_idx << 4 | 0x2);
> + ub953_write_ind(priv, UB953_IND_TARGET_PAT_GEN, UB953_IND_PGEN_CSI_DI,
> + 0x1e);
> +
> + ub953_write_ind16(priv, UB953_IND_TARGET_PAT_GEN,
> + UB953_IND_PGEN_LINE_SIZE1, line_size);
> + ub953_write_ind16(priv, UB953_IND_TARGET_PAT_GEN,
> + UB953_IND_PGEN_BAR_SIZE1, bar_size);
> + ub953_write_ind16(priv, UB953_IND_TARGET_PAT_GEN,
> + UB953_IND_PGEN_ACT_LPF1, act_lpf);
> + ub953_write_ind16(priv, UB953_IND_TARGET_PAT_GEN,
> + UB953_IND_PGEN_TOT_LPF1, tot_lpf);
> + ub953_write_ind16(priv, UB953_IND_TARGET_PAT_GEN,
> + UB953_IND_PGEN_LINE_PD1, line_pd);
> + ub953_write_ind(priv, UB953_IND_TARGET_PAT_GEN, UB953_IND_PGEN_VBP,
> + vbp);
> + ub953_write_ind(priv, UB953_IND_TARGET_PAT_GEN, UB953_IND_PGEN_VFP,
> + vfp);
> +
> + return 0;
> +}
> +
> +static void ub953_disable_tpg(struct ub953_data *priv)
> +{
> + ub953_write_ind(priv, UB953_IND_TARGET_PAT_GEN, UB953_IND_PGEN_CTL,
> + 0x0);
> +}
> +
> +static int ub953_s_ctrl(struct v4l2_ctrl *ctrl)
> +{
> + struct ub953_data *priv =
> + container_of(ctrl->handler, struct ub953_data, ctrl_handler);
> + int ret = 0;
> +
> + switch (ctrl->id) {
> + case V4L2_CID_TEST_PATTERN:
> + if (ctrl->val == 0)
> + ub953_disable_tpg(priv);
> + else
> + ret = ub953_enable_tpg(priv, ctrl->val);
> + break;
> + }
> +
> + return ret;
> +}
> +
> +static const struct v4l2_ctrl_ops ub953_ctrl_ops = {
> + .s_ctrl = ub953_s_ctrl,
> +};
> +
> +static int ub953_notify_bound(struct v4l2_async_notifier *notifier,
> + struct v4l2_subdev *source_subdev,
> + struct v4l2_async_subdev *asd)
> +{
> + struct ub953_data *priv = sd_to_ub953(notifier->sd);
> + struct device *dev = &priv->client->dev;
> + unsigned int src_pad;
> + int ret;
> +
> + ret = media_entity_get_fwnode_pad(&source_subdev->entity,
> + source_subdev->fwnode,
> + MEDIA_PAD_FL_SOURCE);
> + if (ret < 0) {
> + dev_err(dev, "Failed to find pad for %s\n",
> + source_subdev->name);
> + return ret;
> + }
> +
> + priv->source_sd = source_subdev;
> + src_pad = ret;
> +
> + ret = media_create_pad_link(
> + &source_subdev->entity, src_pad, &priv->sd.entity, 0,
> + MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE);
> + if (ret) {
> + dev_err(dev, "Unable to link %s:%u -> %s:0\n",
> + source_subdev->name, src_pad, priv->sd.name);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static const struct v4l2_async_notifier_operations ub953_notify_ops = {
> + .bound = ub953_notify_bound,
> +};
> +
> +static int ub953_v4l2_notifier_register(struct ub953_data *priv)
> +{
> + struct device *dev = &priv->client->dev;
> + struct v4l2_async_subdev *asd;
> + struct device_node *ep_node;
> + int ret;
> +
> + ep_node = of_graph_get_endpoint_by_regs(dev->of_node, 0, 0);

s/0, 0/UB953_PAD_SINK, 0/

Similar comment for other calls to this function below.

> + if (!ep_node) {
> + dev_err(dev, "No graph endpoint\n");
> + return -ENODEV;
> + }
> +
> + v4l2_async_nf_init(&priv->notifier);
> +
> + asd = v4l2_async_nf_add_fwnode_remote(&priv->notifier,
> + of_fwnode_handle(ep_node),
> + struct v4l2_async_subdev);
> +
> + of_node_put(ep_node);
> +
> + if (IS_ERR(asd)) {
> + dev_err(dev, "Failed to add subdev: %ld", PTR_ERR(asd));
> + v4l2_async_nf_cleanup(&priv->notifier);
> + return PTR_ERR(asd);
> + }
> +
> + priv->notifier.ops = &ub953_notify_ops;
> +
> + ret = v4l2_async_subdev_nf_register(&priv->sd, &priv->notifier);
> + if (ret) {
> + dev_err(dev, "Failed to register subdev_notifier");
> + v4l2_async_nf_cleanup(&priv->notifier);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static void ub953_v4l2_notifier_unregister(struct ub953_data *priv)
> +{
> + v4l2_async_nf_unregister(&priv->notifier);
> + v4l2_async_nf_cleanup(&priv->notifier);
> +}
> +
> +/*
> + * Probing
> + */
> +
> +static int ub953_i2c_master_init(struct ub953_data *priv)
> +{
> + /* i2c fast mode */
> + u32 ref = 26250000;
> + u32 scl_high = 915; /* ns */
> + u32 scl_low = 1641; /* ns */
> + int ret;
> +
> + scl_high = div64_u64((u64)scl_high * ref, 1000000000) - 5;
> + scl_low = div64_u64((u64)scl_low * ref, 1000000000) - 5;
> +
> + ret = ub953_write(priv, UB953_REG_SCL_HIGH_TIME, scl_high);
> + if (ret)
> + return ret;
> +
> + ret = ub953_write(priv, UB953_REG_SCL_LOW_TIME, scl_low);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static u64 ub953_get_fc_rate(struct ub953_data *priv)
> +{
> + if (priv->hw_data->ub971) {
> + switch (priv->mode) {
> + case UB953_MODE_SYNC:
> + return priv->plat_data->bc_rate * 160ull;
> + default:
> + /* Not supported */
> + return 0;
> + }
> + } else {
> + switch (priv->mode) {
> + case UB953_MODE_SYNC:
> + return priv->plat_data->bc_rate / 2 * 160ull;
> + default:
> + /* Not supported */
> + return 0;
> + }
> + }

This could be simplified to

if (priv->mode != UB953_MODE_SYNC)
/* Not supported */
return 0;

if (priv->hw_data->ub971)
return priv->plat_data->bc_rate * 160ull;
else
return priv->plat_data->bc_rate / 2 * 160ull;

> +}
> +
> +static unsigned long ub953_calc_clkout_ub953(struct ub953_data *priv,
> + unsigned long target, u64 fc,
> + u8 *hs_div, u8 *m, u8 *n)
> +{
> + /*
> + * We always use 4 as a pre-divider (HS_CLK_DIV = 2).
> + *
> + * According to the datasheet:
> + * - "HS_CLK_DIV typically should be set to either 16, 8, or 4 (default)."
> + * - "if it is not possible to have an integer ratio of N/M, it is best to
> + * select a smaller value for HS_CLK_DIV.
> + *
> + * For above reasons the default HS_CLK_DIV seems the best in the average
> + * case. Use always that value to keep the code simple.
> + */
> + static const unsigned long hs_clk_div = 4;
> +
> + u64 fc_divided;
> + unsigned long mul, div;
> + unsigned long res;
> +
> + /* clkout = fc / hs_clk_div * m / n */
> +
> + fc_divided = div_u64(fc, hs_clk_div);
> +
> + rational_best_approximation(target, fc_divided, (1 << 5) - 1,
> + (1 << 8) - 1, &mul, &div);
> +
> + res = div_u64(fc_divided * mul, div);
> +
> + *hs_div = hs_clk_div;
> + *m = mul;
> + *n = div;
> +
> + return res;
> +}
> +
> +static unsigned long ub953_calc_clkout_ub971(struct ub953_data *priv,
> + unsigned long target, u64 fc,
> + u8 *m, u8 *n)
> +{
> + u64 fc_divided;
> + unsigned long mul, div;
> + unsigned long res;
> +
> + /* clkout = fc * m / (8 * n) */
> +
> + fc_divided = div_u64(fc, 8);
> +
> + rational_best_approximation(target, fc_divided, (1 << 5) - 1,
> + (1 << 8) - 1, &mul, &div);
> +
> + res = div_u64(fc_divided * mul, div);
> +
> + *m = mul;
> + *n = div;
> +
> + return res;
> +}
> +
> +static unsigned long ub953_clkout_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct ub953_data *priv = container_of(hw, struct ub953_data, clkout_clk_hw);
> + struct device *dev = &priv->client->dev;
> + u8 ctrl0, ctrl1;
> + u32 mul, div;
> + u64 fc_rate;
> + u32 hs_clk_div;
> + u64 rate;
> + int ret;
> +
> + ret = ub953_read(priv, UB953_REG_CLKOUT_CTRL0, &ctrl0);
> + if (ret) {
> + dev_err(dev, "Failed to read CLKOUT_CTRL0: %d\n", ret);
> + return 0;
> + }
> +
> + ret = ub953_read(priv, UB953_REG_CLKOUT_CTRL1, &ctrl1);
> + if (ret) {
> + dev_err(dev, "Failed to read CLKOUT_CTRL1: %d\n", ret);
> + return 0;
> + }
> +
> + fc_rate = ub953_get_fc_rate(priv);
> +
> + if (priv->hw_data->ub971) {
> + mul = ctrl0 & 0x1f;
> + div = ctrl1;
> +
> + if (div == 0)
> + return 0;
> +
> + rate = div_u64(fc_rate * mul, 8 * div);
> +
> + dev_dbg(dev, "clkout: fc rate %llu, mul %u, div %u = %llu\n",
> + fc_rate, mul, div, rate);
> + } else {
> + mul = ctrl0 & 0x1f;
> + hs_clk_div = 1 << (ctrl0 >> 5);
> + div = ctrl1;
> +
> + if (div == 0)
> + return 0;
> +
> + rate = div_u64(div_u64(fc_rate, hs_clk_div) * mul, div);
> +
> + dev_dbg(dev,
> + "clkout: fc rate %llu, hs_clk_div %u, mul %u, div %u = %llu\n",
> + fc_rate, hs_clk_div, mul, div, rate);
> + }
> +
> + return rate;
> +}
> +
> +static long ub953_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long *parent_rate)
> +{
> + struct ub953_data *priv = container_of(hw, struct ub953_data, clkout_clk_hw);
> + struct device *dev = &priv->client->dev;
> + unsigned long res;
> + u64 fc_rate;
> + u8 hs_div, m, n;
> +
> + fc_rate = ub953_get_fc_rate(priv);
> +
> + if (priv->hw_data->ub971) {
> + res = ub953_calc_clkout_ub971(priv, rate, fc_rate, &m, &n);
> +
> + dev_dbg(dev,
> + "%s %llu * %u / (8 * %u) = %lu (requested %lu)",
> + __func__, fc_rate, m, n, res, rate);
> + } else {
> + res = ub953_calc_clkout_ub953(priv, rate, fc_rate, &hs_div, &m, &n);
> +
> + dev_dbg(dev,
> + "%s %llu / %u * %u / %u = %lu (requested %lu)",
> + __func__, fc_rate, hs_div, m, n, res, rate);
> + }
> +
> + return res;
> +}
> +
> +static int ub953_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long parent_rate)
> +{
> + struct ub953_data *priv = container_of(hw, struct ub953_data, clkout_clk_hw);
> + u64 fc_rate;
> + u8 hs_div, m, n;
> + unsigned long res;
> +
> + fc_rate = ub953_get_fc_rate(priv);
> +
> + if (priv->hw_data->ub971) {
> + res = ub953_calc_clkout_ub971(priv, rate, fc_rate, &m, &n);
> +
> + ub953_write(priv, UB953_REG_CLKOUT_CTRL0, m);
> + ub953_write(priv, UB953_REG_CLKOUT_CTRL1, n);
> + } else {
> + res = ub953_calc_clkout_ub953(priv, rate, fc_rate, &hs_div, &m, &n);
> +
> + ub953_write(priv, UB953_REG_CLKOUT_CTRL0, (__ffs(hs_div) << 5) | m);
> + ub953_write(priv, UB953_REG_CLKOUT_CTRL1, n);
> + }
> +
> + dev_dbg(&priv->client->dev,
> + "%s %lu (requested %lu)\n", __func__, res, rate);
> +
> + return 0;
> +}
> +
> +static const struct clk_ops ub953_clkout_ops = {
> + .recalc_rate = ub953_clkout_recalc_rate,
> + .round_rate = ub953_clkout_round_rate,
> + .set_rate = ub953_clkout_set_rate,
> +};
> +
> +static void ub953_init_clkout_ub953(struct ub953_data *priv)
> +{
> + u64 fc_rate;
> + u8 hs_div, m, n;
> +
> + fc_rate = ub953_get_fc_rate(priv);
> +
> + ub953_calc_clkout_ub953(priv, 25000000, fc_rate, &hs_div, &m, &n);
> +
> + ub953_write(priv, UB953_REG_CLKOUT_CTRL0, (__ffs(hs_div) << 5) | m);
> + ub953_write(priv, UB953_REG_CLKOUT_CTRL1, n);
> +}
> +
> +static void ub953_init_clkout_ub971(struct ub953_data *priv)
> +{
> + u64 fc_rate;
> + u8 m, n;
> +
> + fc_rate = ub953_get_fc_rate(priv);
> +
> + ub953_calc_clkout_ub971(priv, 25000000, fc_rate, &m, &n);
> +
> + ub953_write(priv, UB953_REG_CLKOUT_CTRL0, m);
> + ub953_write(priv, UB953_REG_CLKOUT_CTRL1, n);
> +}
> +
> +static int ub953_register_clkout(struct ub953_data *priv)
> +{
> + struct device *dev = &priv->client->dev;
> + const struct clk_init_data init = {
> + .name = kasprintf(GFP_KERNEL, "ds90%s.%s.clk_out",
> + priv->hw_data->model, dev_name(dev)),
> + .ops = &ub953_clkout_ops,
> + };
> + int ret;
> +
> + /* Initialize clkout to 25MHz by default */
> + if (priv->hw_data->ub971)
> + ub953_init_clkout_ub971(priv);
> + else
> + ub953_init_clkout_ub953(priv);
> +
> + priv->clkout_clk_hw.init = &init;
> +
> + ret = devm_clk_hw_register(dev, &priv->clkout_clk_hw);
> + kfree(init.name);
> + if (ret)
> + return dev_err_probe(dev, ret, "Cannot register clock HW\n");
> +
> + ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
> + &priv->clkout_clk_hw);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "Cannot add OF clock provider\n");
> +
> + return 0;
> +}
> +
> +static int ub953_add_i2c_adapter(struct ub953_data *priv)
> +{
> + struct device *dev = &priv->client->dev;
> + struct fwnode_handle *i2c_handle;
> + int ret;
> +
> + i2c_handle = device_get_named_child_node(dev, "i2c");
> + if (!i2c_handle)
> + return 0;
> +
> + ret = i2c_atr_add_adapter(priv->plat_data->atr, priv->plat_data->port,
> + i2c_handle);
> +
> + fwnode_handle_put(i2c_handle);
> +
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static const struct regmap_config ub953_regmap_config = {
> + .name = "ds90ub953",
> + .reg_bits = 8,
> + .val_bits = 8,
> + .reg_format_endian = REGMAP_ENDIAN_DEFAULT,
> + .val_format_endian = REGMAP_ENDIAN_DEFAULT,
> +};
> +
> +static int ub953_parse_dt(struct ub953_data *priv)
> +{
> + struct device_node *np = priv->client->dev.of_node;
> + struct device *dev = &priv->client->dev;
> + struct device_node *ep_np;
> + int ret;
> +
> + if (!np) {
> + dev_err(dev, "OF: no device tree node!\n");
> + return -ENOENT;
> + }
> +
> + ep_np = of_graph_get_endpoint_by_regs(np, 0, 0);
> + if (!ep_np) {
> + dev_err(dev, "OF: no endpoint\n");
> + return -ENOENT;
> + }
> +
> + ret = of_property_count_u32_elems(ep_np, "data-lanes");
> +
> + of_node_put(ep_np);
> +
> + if (ret <= 0) {
> + dev_err(dev, "OF: failed to parse data-lanes: %d\n", ret);
> + return ret;
> + }
> +
> + if (ret != 1 && ret != 2 && ret != 4) {
> + dev_err(dev, "OF: bad number of data-lanes: %d\n", ret);
> + return -EINVAL;
> + }
> +
> + priv->num_data_lanes = ret;
> +
> + return 0;
> +}
> +
> +static int ub953_probe(struct i2c_client *client)
> +{
> + struct device *dev = &client->dev;
> + struct ub953_data *priv;
> + int ret;
> + u8 v;
> + bool mode_override;
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->client = client;
> +
> + priv->hw_data = of_device_get_match_data(dev);
> + if (!priv->hw_data)
> + return -ENODEV;
> +
> + priv->plat_data = dev_get_platdata(&client->dev);
> + if (!priv->plat_data) {
> + dev_err(dev, "Platform data missing\n");
> + return -ENODEV;
> + }
> +
> + mutex_init(&priv->reg_lock);
> +
> + /*
> + * Initialize to invalid values so that the first reg writes will
> + * configure the target.
> + */
> + priv->current_indirect_target = 0xff;
> +
> + priv->regmap = devm_regmap_init_i2c(client, &ub953_regmap_config);
> + if (IS_ERR(priv->regmap)) {
> + dev_err(dev, "Failed to init regmap\n");
> + ret = PTR_ERR(priv->regmap);
> + goto err_mutex_destroy;
> + }
> +
> + ret = ub953_parse_dt(priv);
> + if (ret)
> + goto err_mutex_destroy;
> +
> + ret = ub953_read(priv, UB953_REG_MODE_SEL, &v);
> + if (ret)
> + goto err_mutex_destroy;
> +
> + if (!(v & UB953_REG_MODE_SEL_MODE_DONE)) {
> + dev_err(dev, "Mode value not stabilized\n");
> + ret = -ENODEV;
> + goto err_mutex_destroy;
> + }
> +
> + mode_override = v & UB953_REG_MODE_SEL_MODE_OVERRIDE;
> +
> + switch (v & UB953_REG_MODE_SEL_MODE_MASK) {
> + case 0:
> + priv->mode = UB953_MODE_SYNC;
> + break;
> + case 2:
> + priv->mode = UB953_MODE_NONSYNC_EXT;
> + break;
> + case 3:
> + priv->mode = UB953_MODE_NONSYNC_INT;
> + break;
> + case 5:
> + priv->mode = UB953_MODE_DVP;
> + break;
> + default:
> + dev_err(dev, "Illegal mode in mode register\n");
> + ret = -ENODEV;
> + goto err_mutex_destroy;
> + }
> +
> + dev_dbg(dev, "mode from %s: %#x\n", mode_override ? "reg" : "strap",
> + priv->mode);
> +
> + if (priv->mode != UB953_MODE_SYNC) {
> + dev_err(dev, "Only synchronous mode supported\n");
> + ret = -ENODEV;
> + goto err_mutex_destroy;
> + }
> +
> + ret = ub953_read(priv, UB953_REG_REV_MASK_ID, &v);
> + if (ret) {
> + dev_err(dev, "Failed to read revision: %d", ret);
> + goto err_mutex_destroy;
> + }
> +
> + dev_info(dev, "Found %s rev/mask %#04x\n", priv->hw_data->model, v);
> +
> + ret = ub953_read(priv, UB953_REG_GENERAL_CFG, &v);
> + if (ret)
> + goto err_mutex_destroy;
> +
> + dev_dbg(dev, "i2c strap setting %s V\n",
> + (v & UB953_REG_GENERAL_CFG_I2C_STRAP_MODE) ? "1.8" : "3.3");

Please move the hardware checks and initialization to a separate
function, probe() is too big.

> +
> + ret = ub953_i2c_master_init(priv);
> + if (ret) {
> + dev_err(dev, "i2c init failed: %d\n", ret);
> + goto err_mutex_destroy;
> + }
> +
> + ret = ub953_gpiochip_probe(priv);
> + if (ret) {
> + dev_err(dev, "Failed to init gpiochip\n");
> + goto err_mutex_destroy;
> + }
> +
> + ub953_write(priv, UB953_REG_GENERAL_CFG,
> + UB953_REG_GENERAL_CFG_CONT_CLK |
> + ((priv->num_data_lanes - 1) << UB953_REG_GENERAL_CFG_CSI_LANE_SEL_SHIFT) |
> + UB953_REG_GENERAL_CFG_CRC_TX_GEN_ENABLE);

This too.

> +
> + ret = ub953_register_clkout(priv);
> + if (ret) {
> + dev_err(dev, "Failed to register clkout\n");
> + goto err_gpiochip_remove;
> + }
> +
> + v4l2_i2c_subdev_init(&priv->sd, priv->client, &ub953_subdev_ops);
> +
> + v4l2_ctrl_handler_init(&priv->ctrl_handler,
> + ARRAY_SIZE(ub953_tpg_qmenu) - 1);
> + priv->sd.ctrl_handler = &priv->ctrl_handler;
> +
> + v4l2_ctrl_new_std_menu_items(&priv->ctrl_handler, &ub953_ctrl_ops,
> + V4L2_CID_TEST_PATTERN,
> + ARRAY_SIZE(ub953_tpg_qmenu) - 1, 0, 0,
> + ub953_tpg_qmenu);
> +
> + if (priv->ctrl_handler.error) {
> + ret = priv->ctrl_handler.error;
> + goto err_gpiochip_remove;
> + }
> +
> + priv->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS |
> + V4L2_SUBDEV_FL_STREAMS;
> + priv->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
> + priv->sd.entity.ops = &ub953_entity_ops;
> +
> + priv->pads[0].flags = MEDIA_PAD_FL_SINK;
> + priv->pads[1].flags = MEDIA_PAD_FL_SOURCE;
> +
> + ret = media_entity_pads_init(&priv->sd.entity, 2, priv->pads);
> + if (ret) {
> + dev_err(dev, "Failed to init pads\n");
> + goto err_remove_ctrls;
> + }
> +
> + priv->tx_ep_np = of_graph_get_endpoint_by_regs(dev->of_node, 1, 0);

Error handling ?

> + priv->sd.fwnode = of_fwnode_handle(priv->tx_ep_np);
> +
> + priv->sd.state_lock = priv->sd.ctrl_handler->lock;
> +
> + ret = v4l2_subdev_init_finalize(&priv->sd);
> + if (ret)
> + goto err_entity_cleanup;

I think I would move subdev init to a separate function too.

> +
> + ret = ub953_v4l2_notifier_register(priv);
> + if (ret) {
> + dev_err(dev, "v4l2 subdev notifier register failed: %d\n", ret);
> + goto err_free_state;
> + }
> +
> + ret = v4l2_async_register_subdev(&priv->sd);
> + if (ret) {
> + dev_err(dev, "v4l2_async_register_subdev error: %d\n", ret);
> + goto err_unreg_notif;
> + }
> +
> + ret = ub953_add_i2c_adapter(priv);
> + if (ret) {
> + dev_err(dev, "failed to add remote i2c adapter\n");
> + goto err_unreg_async_subdev;
> + }
> +
> + return 0;
> +
> +err_unreg_async_subdev:
> + v4l2_async_unregister_subdev(&priv->sd);
> +err_unreg_notif:
> + ub953_v4l2_notifier_unregister(priv);
> +err_free_state:
> + v4l2_subdev_cleanup(&priv->sd);
> +err_entity_cleanup:
> + if (priv->tx_ep_np)
> + of_node_put(priv->tx_ep_np);
> +
> + media_entity_cleanup(&priv->sd.entity);
> +err_remove_ctrls:
> + v4l2_ctrl_handler_free(&priv->ctrl_handler);
> +err_gpiochip_remove:
> + ub953_gpiochip_remove(priv);
> +err_mutex_destroy:
> + mutex_destroy(&priv->reg_lock);
> +
> + return ret;
> +}
> +
> +static void ub953_remove(struct i2c_client *client)
> +{
> + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> + struct ub953_data *priv = sd_to_ub953(sd);
> +
> + i2c_atr_del_adapter(priv->plat_data->atr,
> + priv->plat_data->port);
> +
> + v4l2_async_unregister_subdev(&priv->sd);
> +
> + ub953_v4l2_notifier_unregister(priv);
> +
> + v4l2_subdev_cleanup(&priv->sd);
> +
> + of_node_put(priv->tx_ep_np);
> +
> + media_entity_cleanup(&priv->sd.entity);
> +
> + v4l2_ctrl_handler_free(&priv->ctrl_handler);
> +
> + ub953_gpiochip_remove(priv);
> + mutex_destroy(&priv->reg_lock);
> +}
> +
> +static const struct ub953_hw_data ds90ub953_hw = {
> + .model = "ub953",
> +};
> +
> +static const struct ub953_hw_data ds90ub971_hw = {
> + .model = "ub971",
> + .ub971 = true,
> +};
> +
> +static const struct i2c_device_id ub953_id[] = {
> + { "ds90ub953-q1", 0 },
> + { "ds90ub971-q1", 0 },
> + {}
> +};
> +MODULE_DEVICE_TABLE(i2c, ub953_id);
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id ub953_dt_ids[] = {
> + { .compatible = "ti,ds90ub953-q1", .data = &ds90ub953_hw },
> + { .compatible = "ti,ds90ub971-q1", .data = &ds90ub971_hw },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, ub953_dt_ids);
> +#endif
> +
> +static struct i2c_driver ds90ub953_driver = {
> + .probe_new = ub953_probe,
> + .remove = ub953_remove,
> + .id_table = ub953_id,
> + .driver = {
> + .name = "ds90ub953",
> + .owner = THIS_MODULE,
> + .of_match_table = of_match_ptr(ub953_dt_ids),
> + },
> +};
> +
> +module_i2c_driver(ds90ub953_driver);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("Texas Instruments DS90UB953 serializer driver");
> +MODULE_AUTHOR("Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>");
> +MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>");
> +MODULE_IMPORT_NS(I2C_ATR);

--
Regards,

Laurent Pinchart