[PATCH v5 4/6] arm64: dts: qcom: sm6125: Add UFS nodes

From: Lux Aliaga
Date: Sat Dec 31 2022 - 17:25:19 EST


Adds a UFS host controller node and its corresponding PHY to
the sm6125 platform.

Signed-off-by: Lux Aliaga <they@xxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm6125.dtsi | 59 ++++++++++++++++++++++++++++
1 file changed, 59 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index df5453fcf2b9..9cb081332849 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -511,6 +511,65 @@ sdhc_2: mmc@4784000 {
status = "disabled";
};

+ ufs_mem_hc: ufs@4804000 {
+ compatible = "qcom,sm6125-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+ reg = <0x04804000 0x3000>, <0x04810000 0x8000>;
+ reg-names = "std", "ice";
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&ufs_mem_phy>;
+ phy-names = "ufsphy";
+ lanes-per-direction = <1>;
+ #reset-cells = <1>;
+ resets = <&gcc GCC_UFS_PHY_BCR>;
+ reset-names = "rst";
+ iommus = <&apps_smmu 0x200 0x0>;
+
+ clock-names = "core_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk",
+ "ice_core_clk";
+ clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_UFS_PHY_AHB_CLK>,
+ <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+ <&rpmcc RPM_SMD_XO_CLK_SRC>,
+ <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+ freq-table-hz = <50000000 240000000>,
+ <0 0>,
+ <0 0>,
+ <37500000 150000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <75000000 300000000>;
+
+ non-removable;
+ status = "disabled";
+ };
+
+ ufs_mem_phy: phy@4807000 {
+ compatible = "qcom,sm6125-qmp-ufs-phy";
+ reg = <0x04807000 0x1c4>;
+
+ clock-names = "ref", "ref_aux";
+ clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+
+ power-domains = <&gcc UFS_PHY_GDSC>;
+
+ resets = <&ufs_mem_hc 0>;
+ reset-names = "ufsphy";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
gpi_dma0: dma-controller@4a00000 {
compatible = "qcom,sm6125-gpi-dma", "qcom,sdm845-gpi-dma";
reg = <0x04a00000 0x60000>;
--
2.38.1