Re: [PATCH RESEND v2 3/8] media: uvc: Create UVC_QUIRK_IGNORE_EMPTY_TS quirk

From: Laurent Pinchart
Date: Fri Dec 30 2022 - 08:46:15 EST


Hi Ricardo,

Thank you for the patch.

On Fri, Dec 02, 2022 at 06:02:43PM +0100, Ricardo Ribalda wrote:
> Some Sunplus cameras took a borderline interpretation of the UVC 1.5
> standard, and fill the PTS and SCR fields with invalid data if the
> package does not contain data.
>
> "STC must be captured when the first video data of a video frame is put
> on the USB bus."
>
> Eg:
>
> buffer: 0xa7755c00 len 000012 header:0x8c stc 00000000 sof 0000 pts 00000000
> buffer: 0xa7755c00 len 000012 header:0x8c stc 00000000 sof 0000 pts 00000000
> buffer: 0xa7755c00 len 000668 header:0x8c stc 73779dba sof 070c pts 7376d37a
>
> This borderline/buggy interpretation has been implemented in a variety
> of devices, from directly Sunplus and from other OEMs that rebrand
> Sunplus products.
>
> Luckily we can identify the affected modules by looking at the guid of
> one of the extension units:
>
> VideoControl Interface Descriptor:
> guidExtensionCode {82066163-7050-ab49-b8cc-b3855e8d221d}
>
> This patch adds a new quirk to take care of this.
>
> Complete lsusb of one of the affected cameras:

That's not complete (but that's fine from a commit message point of
view, the full descriptors would be too long). Can you share the full
descriptors for all the devices you know are affected by this ?

> Bus 001 Device 003: ID 1bcf:2a01 Sunplus Innovation Technology Inc.
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.01
> bDeviceClass 239 Miscellaneous Device
> bDeviceSubClass 2 ?
> bDeviceProtocol 1 Interface Association
> bMaxPacketSize0 64
> idVendor 0x1bcf Sunplus Innovation Technology Inc.
> idProduct 0x2a01
> bcdDevice 0.02
> iManufacturer 1 SunplusIT Inc
> iProduct 2 HanChen Wise Camera
> iSerial 3 01.00.00
> bNumConfigurations 1
>
> Tested-by: HungNien Chen <hn.chen@xxxxxxxxxxxxx>
> Signed-off-by: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
> ---
> drivers/media/usb/uvc/uvc_driver.c | 11 +++++++++++
> drivers/media/usb/uvc/uvc_video.c | 8 ++++++++
> drivers/media/usb/uvc/uvcvideo.h | 1 +
> 3 files changed, 20 insertions(+)
>
> diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
> index c63ecfd4617d..80ef0f0e04b0 100644
> --- a/drivers/media/usb/uvc/uvc_driver.c
> +++ b/drivers/media/usb/uvc/uvc_driver.c
> @@ -1497,6 +1497,17 @@ static const struct uvc_entity_quirk {
> u8 guid[16];
> u32 quirks;
> } uvc_entity_quirk[] = {
> + /*
> + * Some SunPlus uvc 1.5 device firmware expects that packages with

s/uvc/UVC/

> + * no frame data are ignored by the host.

If it's two paragraphs, you need a blank line in-between. If it's a
single paragraph, you must not add a line break.

> + * Therefore it does not clear the PTS/SCR bits in the header, and
> + * breaks the timestamp decode algorithm.
> + */
> + {
> + .guid = {0x82, 0x06, 0x61, 0x63, 0x70, 0x50, 0xab, 0x49,
> + 0xb8, 0xcc, 0xb3, 0x85, 0x5e, 0x8d, 0x22, 0x1d},
> + .quirks = UVC_QUIRK_IGNORE_EMPTY_TS,
> + },
> };
>
> static void uvc_entity_quirks(struct uvc_device *dev)
> diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
> index ab56e65ca324..a5b184e71ad7 100644
> --- a/drivers/media/usb/uvc/uvc_video.c
> +++ b/drivers/media/usb/uvc/uvc_video.c
> @@ -500,6 +500,14 @@ uvc_video_clock_decode(struct uvc_streaming *stream, struct uvc_buffer *buf,
> if (len < header_size)
> return;
>
> + /*
> + * Ignore the hardware timestamp on frames with no data on
> + * miss-behaving devices.
> + */

Could you please expand this comment to explain the issue ? Having to
use git blame and read the commit message to understand why the check is
here isn't very convenient.

> + if (stream->dev->quirks & UVC_QUIRK_IGNORE_EMPTY_TS &&
> + len == header_size)
> + return;
> +
> /*
> * Extract the timestamps:
> *
> diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
> index 24c911aeebce..f395b67fe95a 100644
> --- a/drivers/media/usb/uvc/uvcvideo.h
> +++ b/drivers/media/usb/uvc/uvcvideo.h
> @@ -212,6 +212,7 @@
> #define UVC_QUIRK_RESTORE_CTRLS_ON_INIT 0x00000400
> #define UVC_QUIRK_FORCE_Y8 0x00000800
> #define UVC_QUIRK_FORCE_BPP 0x00001000
> +#define UVC_QUIRK_IGNORE_EMPTY_TS 0x00002000
>
> /* Format flags */
> #define UVC_FMT_FLAG_COMPRESSED 0x00000001
>

--
Regards,

Laurent Pinchart