[PATCH v5 1/8] gpio: regmap: Always set gpio_chip get_direction

From: William Breathitt Gray
Date: Tue Dec 27 2022 - 09:32:51 EST


If you only have reg_dat_base set, then it is input-only; if you only
have reg_set_base set, then it is output-only. Thus, we can always set
gpio_chip get_direction to gpio_regmap_get_direction and return
GPIO_LINE_DIRECTION_IN/GPIO_LINE_DIRECTION_OUT given the respective
register base addresses configuration.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Acked-by: Michael Walle <michael@xxxxxxxx>
Signed-off-by: William Breathitt Gray <william.gray@xxxxxxxxxx>
---
drivers/gpio/gpio-regmap.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-regmap.c b/drivers/gpio/gpio-regmap.c
index 6383136cbe59..f907c9c19fce 100644
--- a/drivers/gpio/gpio-regmap.c
+++ b/drivers/gpio/gpio-regmap.c
@@ -111,6 +111,11 @@ static int gpio_regmap_get_direction(struct gpio_chip *chip,
unsigned int base, val, reg, mask;
int invert, ret;

+ if (gpio->reg_dat_base && !gpio->reg_set_base)
+ return GPIO_LINE_DIRECTION_IN;
+ if (gpio->reg_set_base && !gpio->reg_dat_base)
+ return GPIO_LINE_DIRECTION_OUT;
+
if (gpio->reg_dir_out_base) {
base = gpio_regmap_addr(gpio->reg_dir_out_base);
invert = 0;
@@ -265,8 +270,8 @@ struct gpio_regmap *gpio_regmap_register(const struct gpio_regmap_config *config
else if (gpio->reg_set_base)
chip->set = gpio_regmap_set;

+ chip->get_direction = gpio_regmap_get_direction;
if (gpio->reg_dir_in_base || gpio->reg_dir_out_base) {
- chip->get_direction = gpio_regmap_get_direction;
chip->direction_input = gpio_regmap_direction_input;
chip->direction_output = gpio_regmap_direction_output;
}
--
2.38.1