Re: [PATCH v13,2/3] drm: mediatek: Set dpi format in mmsys

From: Chun-Kuang Hu
Date: Mon Dec 26 2022 - 18:13:54 EST


Hi, Xinlei:

<xinlei.lee@xxxxxxxxxxxx> 於 2022年10月24日 週一 上午10:05寫道:
>
> From: Xinlei Lee <xinlei.lee@xxxxxxxxxxxx>
>
> Dpi output needs to adjust the output format to dual edge for MT8186.

Applied to mediatek-drm-next [1], thanks.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux.git/log/?h=mediatek-drm-next

Regards,
Chun-Kuang.

>
> Co-developed-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx>
> Signed-off-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx>
> Signed-off-by: Xinlei Lee <xinlei.lee@xxxxxxxxxxxx>
> Reviewed-by: CK Hu <ck.hu@xxxxxxxxxxxx>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
> Reviewed-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/mediatek/mtk_dpi.c | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 630a4e301ef6..ad87ecddf58d 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -15,6 +15,7 @@
> #include <linux/of_graph.h>
> #include <linux/pinctrl/consumer.h>
> #include <linux/platform_device.h>
> +#include <linux/soc/mediatek/mtk-mmsys.h>
> #include <linux/types.h>
>
> #include <video/videomode.h>
> @@ -30,6 +31,7 @@
> #include "mtk_disp_drv.h"
> #include "mtk_dpi_regs.h"
> #include "mtk_drm_ddp_comp.h"
> +#include "mtk_drm_drv.h"
>
> enum mtk_dpi_out_bit_num {
> MTK_DPI_OUT_BIT_NUM_8BITS,
> @@ -67,6 +69,7 @@ struct mtk_dpi {
> struct drm_connector *connector;
> void __iomem *regs;
> struct device *dev;
> + struct device *mmsys_dev;
> struct clk *engine_clk;
> struct clk *pixel_clk;
> struct clk *tvd_clk;
> @@ -135,6 +138,7 @@ struct mtk_dpi_yc_limit {
> * @yuv422_en_bit: Enable bit of yuv422.
> * @csc_enable_bit: Enable bit of CSC.
> * @pixels_per_iter: Quantity of transferred pixels per iteration.
> + * @edge_cfg_in_mmsys: If the edge configuration for DPI's output needs to be set in MMSYS.
> */
> struct mtk_dpi_conf {
> unsigned int (*cal_factor)(int clock);
> @@ -153,6 +157,7 @@ struct mtk_dpi_conf {
> u32 yuv422_en_bit;
> u32 csc_enable_bit;
> u32 pixels_per_iter;
> + bool edge_cfg_in_mmsys;
> };
>
> static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask)
> @@ -449,8 +454,12 @@ static void mtk_dpi_dual_edge(struct mtk_dpi *dpi)
> mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING,
> dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_LE ?
> EDGE_SEL : 0, EDGE_SEL);
> + if (dpi->conf->edge_cfg_in_mmsys)
> + mtk_mmsys_ddp_dpi_fmt_config(dpi->mmsys_dev, MTK_DPI_RGB888_DDR_CON);
> } else {
> mtk_dpi_mask(dpi, DPI_DDR_SETTING, DDR_EN | DDR_4PHASE, 0);
> + if (dpi->conf->edge_cfg_in_mmsys)
> + mtk_mmsys_ddp_dpi_fmt_config(dpi->mmsys_dev, MTK_DPI_RGB888_SDR_CON);
> }
> }
>
> @@ -778,8 +787,10 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
> {
> struct mtk_dpi *dpi = dev_get_drvdata(dev);
> struct drm_device *drm_dev = data;
> + struct mtk_drm_private *priv = drm_dev->dev_private;
> int ret;
>
> + dpi->mmsys_dev = priv->mmsys_dev;
> ret = drm_simple_encoder_init(drm_dev, &dpi->encoder,
> DRM_MODE_ENCODER_TMDS);
> if (ret) {
> --
> 2.18.0
>