[PATCH v4 2/2] i2c: Set i2c pinctrl recovery info from it's device pinctrl

[Hanna Hawa]

Currently the i2c subsystem rely on the controller device tree to
initialize the pinctrl recovery information, part of the drivers does
not set this field (rinfo->pinctrl), for example i2c designware driver.

The pins information is saved part of the device structure before probe
and it's done on pinctrl_bind_pins().

Make the i2c init recovery to get the device pins if it's not
initialized by the driver from the device pins.

Signed-off-by: Hanna Hawa <hhhawa@xxxxxxxxxx>
---
 drivers/i2c/i2c-core-base.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index 7539b0740351..8c5f76c43dc8 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -34,6 +34,7 @@
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/devinfo.h>
 #include <linux/pm_domain.h>
 #include <linux/pm_runtime.h>
 #include <linux/pm_wakeirq.h>
@@ -282,7 +283,10 @@ static void i2c_gpio_init_pinctrl_recovery(struct i2c_adapter *adap)
 {
 	struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
 	struct device *dev = &adap->dev;
-	struct pinctrl *p = bri->pinctrl;
+	struct pinctrl *p;
+
+	bri->pinctrl = bri->pinctrl ?: dev_pinctrl(dev->parent);
+	p = bri->pinctrl;
 
 	/*
 	 * we can't change states without pinctrl, so remove the states if
-- 
2.38.1