The default timeout for kselftests is 45 seconds, but that isn't enough
time to run pcm-test when there are many PCMs on the device, nor for
mixer-test when slower control buses and fancier CODECs are present.
As data points, running pcm-test on mt8192-asurada-spherion takes about
1m15s, and mixer-test on rk3399-gru-kevin takes about 2m.
Set the timeout to 4 minutes to allow both pcm-test and mixer-test to
run to completion with some slack.
Reviewed-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
---
Changes in v2:
- Reduced timeout from 10 to 4 minutes
- Tweaked commit message to also mention mixer-test and run time for
mixer-test on rk3399-gru-kevin