[PATCH v2 2/2] dt-bindings: display/panel: Add AUO A030JTN01

[Christophe Branchereau]

From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>

Add binding for the AUO A030JTN01 panel, which is a 320x480 3.0" 4:3
24-bit TFT LCD panel with non-square pixels and a delta-RGB 8-bit
interface.

Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
Signed-off-by: Christophe Branchereau <cbranchereau@xxxxxxxxx>
---
 .../bindings/display/panel/auo,a030jtn01.yaml | 61 +++++++++++++++++++
 1 file changed, 61 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml

diff --git a/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml b/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml
new file mode 100644
index 000000000000..6c099eb63434
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/auo,a030jtn01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AUO A030JTN01 3.0" (320x480 pixels) 24-bit TFT LCD panel
+
+description: |
+  The panel must obey the rules for a SPI slave device as specified in
+  spi/spi-controller.yaml
+
+maintainers:
+  - Paul Cercueil <paul@xxxxxxxxxxxxxxx>
+  - Christophe Branchereau <cbranchereau@xxxxxxxxx>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: auo,a030jtn01
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "auo,a030jtn01";
+            reg = <0>;
+
+            spi-max-frequency = <10000000>;
+
+            reset-gpios = <&gpe 4 GPIO_ACTIVE_LOW>;
+            power-supply = <&lcd_power>;
+
+            backlight = <&backlight>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };
-- 
2.35.1