[Patch net-next v4 11/13] net: dsa: microchip: ptp: add support for perout programmable pins

From: Arun Ramadoss
Date: Mon Dec 12 2022 - 05:31:25 EST


There are two programmable pins available for Trigger output unit to
generate periodic pulses. This patch add verify_pin for the available 2
pins and configure it with respect to GPIO index for the TOU unit.

Tested using testptp
./testptp -i 0 -L 0,2
./testptp -i 0 -d /dev/ptp0 -p 1000000000
./testptp -i 1 -L 1,2
./testptp -i 1 -d /dev/ptp0 -p 100000000

Signed-off-by: Arun Ramadoss <arun.ramadoss@xxxxxxxxxxxxx>
---
v1 - v2
- checkpatch warning to limit 80 chars

Patch v1
- patch is new
---
drivers/net/dsa/microchip/ksz_ptp.c | 35 +++++++++++++++++++++++++++++
drivers/net/dsa/microchip/ksz_ptp.h | 3 +++
2 files changed, 38 insertions(+)

diff --git a/drivers/net/dsa/microchip/ksz_ptp.c b/drivers/net/dsa/microchip/ksz_ptp.c
index 2bc3ed72dc56..ea0b7f9fbb97 100644
--- a/drivers/net/dsa/microchip/ksz_ptp.c
+++ b/drivers/net/dsa/microchip/ksz_ptp.c
@@ -171,6 +171,10 @@ static int ksz_ptp_enable_perout(struct ksz_device *dev,
ptp_data->tou_mode != KSZ_PTP_TOU_IDLE)
return -EBUSY;

+ pin = ptp_find_pin(ptp_data->clock, PTP_PF_PEROUT, request->index);
+ if (pin < 0)
+ return -EINVAL;
+
data32 = FIELD_PREP(PTP_GPIO_INDEX, pin) |
FIELD_PREP(PTP_TOU_INDEX, request->index);
ret = ksz_rmw32(dev, REG_PTP_UNIT_INDEX__4,
@@ -785,6 +789,23 @@ static int ksz_ptp_enable(struct ptp_clock_info *ptp,
return ret;
}

+static int ksz_ptp_verify_pin(struct ptp_clock_info *ptp, unsigned int pin,
+ enum ptp_pin_function func, unsigned int chan)
+{
+ int ret = 0;
+
+ switch (func) {
+ case PTP_PF_NONE:
+ case PTP_PF_PEROUT:
+ break;
+ default:
+ ret = -1;
+ break;
+ }
+
+ return ret;
+}
+
/* Function is pointer to the do_aux_work in the ptp_clock capability */
static long ksz_ptp_do_aux_work(struct ptp_clock_info *ptp)
{
@@ -820,6 +841,7 @@ int ksz_ptp_clock_register(struct dsa_switch *ds)
struct ksz_device *dev = ds->priv;
struct ksz_ptp_data *ptp_data;
int ret;
+ u8 i;

ptp_data = &dev->ptp_data;
mutex_init(&ptp_data->lock);
@@ -834,12 +856,25 @@ int ksz_ptp_clock_register(struct dsa_switch *ds)
ptp_data->caps.adjtime = ksz_ptp_adjtime;
ptp_data->caps.do_aux_work = ksz_ptp_do_aux_work;
ptp_data->caps.enable = ksz_ptp_enable;
+ ptp_data->caps.verify = ksz_ptp_verify_pin;
+ ptp_data->caps.n_pins = KSZ_PTP_N_GPIO;
ptp_data->caps.n_per_out = 3;

ret = ksz_ptp_start_clock(dev);
if (ret)
return ret;

+ for (i = 0; i < KSZ_PTP_N_GPIO; i++) {
+ struct ptp_pin_desc *ptp_pin = &ptp_data->pin_config[i];
+
+ snprintf(ptp_pin->name,
+ sizeof(ptp_pin->name), "ksz_ptp_pin_%02d", i);
+ ptp_pin->index = i;
+ ptp_pin->func = PTP_PF_NONE;
+ }
+
+ ptp_data->caps.pin_config = ptp_data->pin_config;
+
/* Currently only P2P mode is supported. When 802_1AS bit is set, it
* forwards all PTP packets to host port and none to other ports.
*/
diff --git a/drivers/net/dsa/microchip/ksz_ptp.h b/drivers/net/dsa/microchip/ksz_ptp.h
index 9451e3a76375..0ca8ca4f804e 100644
--- a/drivers/net/dsa/microchip/ksz_ptp.h
+++ b/drivers/net/dsa/microchip/ksz_ptp.h
@@ -12,6 +12,8 @@

#include <linux/ptp_clock_kernel.h>

+#define KSZ_PTP_N_GPIO 2
+
enum ksz_ptp_tou_mode {
KSZ_PTP_TOU_IDLE,
KSZ_PTP_TOU_PEROUT,
@@ -20,6 +22,7 @@ enum ksz_ptp_tou_mode {
struct ksz_ptp_data {
struct ptp_clock_info caps;
struct ptp_clock *clock;
+ struct ptp_pin_desc pin_config[KSZ_PTP_N_GPIO];
/* Serializes all operations on the PTP hardware clock */
struct mutex lock;
/* lock for accessing the clock_time */
--
2.36.1