Re: [PATCH] iommu/mediatek: Fix crash on isr after kexec()

From: Ricardo Ribalda
Date: Mon Nov 28 2022 - 17:14:56 EST


Hi Yong


On Mon, 28 Nov 2022 at 07:44, Yong Wu (吴勇) <Yong.Wu@xxxxxxxxxxxx> wrote:
>
> On Fri, 2022-11-25 at 17:28 +0100, Ricardo Ribalda wrote:
> > If the system is rebooted via isr(), the IRQ handler might be
> > triggerd
> > before the domain is initialized. Resulting on an invalid memory
> > access
> > error.
> >
> > Fix:
> > [ 0.500930] Unable to handle kernel read from unreadable memory at
> > virtual address 0000000000000070
> > [ 0.501166] Call trace:
> > [ 0.501174] report_iommu_fault+0x28/0xfc
> > [ 0.501180] mtk_iommu_isr+0x10c/0x1c0
> >
> > Signed-off-by: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
> > ---
> > To: Yong Wu <yong.wu@xxxxxxxxxxxx>
> > To: Joerg Roedel <joro@xxxxxxxxxx>
> > To: Will Deacon <will@xxxxxxxxxx>
> > To: Robin Murphy <robin.murphy@xxxxxxx>
> > To: Matthias Brugger <matthias.bgg@xxxxxxxxx>
> > Cc: iommu@xxxxxxxxxxxxxxx
> > Cc: linux-mediatek@xxxxxxxxxxxxxxxxxxx
> > Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> > Cc: linux-kernel@xxxxxxxxxxxxxxx
> > ---
> > drivers/iommu/mtk_iommu.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> > index 2ab2ecfe01f8..17f6be5a5097 100644
> > --- a/drivers/iommu/mtk_iommu.c
> > +++ b/drivers/iommu/mtk_iommu.c
> > @@ -454,7 +454,7 @@ static irqreturn_t mtk_iommu_isr(int irq, void
> > *dev_id)
> > fault_larb = data->plat_data-
> > >larbid_remap[fault_larb][sub_comm];
> > }
> >
> > - if (report_iommu_fault(&dom->domain, bank->parent_dev,
> > fault_iova,
> > + if (dom && report_iommu_fault(&dom->domain, bank->parent_dev,
> > fault_iova,
>
>
> Which SoC does this issue happen? Does this issue is happened in the
> upstream kernel or the downstream kernel?

I am using chromeos-5.10 and chromeos-5.15 (which are pretty much upstream).

I have seen this issue at least with MT8195 and MT8183


>
> Normally each port enable the iommu defaultly. Let's print the error
> log even though "dom" is null to check which port fail here. then
> analyse the port's behavior.
>
> if (!dom || report_iommu_fault(xx))
> dev_err_ratelimited(xx)

sending a v2 with the change.

Thanks!


>
> > write ? IOMMU_FAULT_WRITE :
> > IOMMU_FAULT_READ)) {
> > dev_err_ratelimited(
> > bank->parent_dev,
> >
> > ---
> > base-commit: 4312098baf37ee17a8350725e6e0d0e8590252d4
> > change-id: 20221125-mtk-iommu-13023f971298
> >
> > Best regards,



--
Ricardo Ribalda