[PATCH v2 2/2] ARM: dts: omap: echo: use preferred enable-gpios for LP5523 LED

[Krzysztof Kozlowski]

The preferred name suffix for properties with single and multiple GPIOs
is "gpios".  Linux GPIO core code supports both.  Bindings are going to
expect the "gpios" one:

  omap3-echo.dtb: lp5523A@32: 'enable-gpio' does not match any of the regexes: '^led@[0-8]$', '^multi-led@[0-8]$', 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

---

Changes since v1:
1. Drop old fix for n900 and correct instead Echo board (Sebastian)
---
 arch/arm/boot/dts/omap3-echo.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap3-echo.dts b/arch/arm/boot/dts/omap3-echo.dts
index 8f02ff5e7da6..06d2377d28ad 100644
--- a/arch/arm/boot/dts/omap3-echo.dts
+++ b/arch/arm/boot/dts/omap3-echo.dts
@@ -146,7 +146,7 @@ lp5523A: lp5523A@32 {
 		label = "q1";
 		reg = <0x32>;
 		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
-		enable-gpio = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* GPIO_109 */
+		enable-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* GPIO_109 */
 
 		multi-led@0 {
 			#address-cells = <1>;
-- 
2.34.1