[tip: x86/boot] x86/boot/compressed: Move efi32_pe_entry() out of head_64.S

From: tip-bot2 for Ard Biesheuvel
Date: Thu Nov 24 2022 - 03:14:02 EST


The following commit has been merged into the x86/boot branch of tip:

Commit-ID: 7f22ca396778fea9332d83ec2359dbe8396e9a06
Gitweb: https://git.kernel.org/tip/7f22ca396778fea9332d83ec2359dbe8396e9a06
Author: Ard Biesheuvel <ardb@xxxxxxxxxx>
AuthorDate: Tue, 22 Nov 2022 17:10:06 +01:00
Committer: Borislav Petkov <bp@xxxxxxx>
CommitterDate: Tue, 22 Nov 2022 19:24:57 +01:00

x86/boot/compressed: Move efi32_pe_entry() out of head_64.S

Move the implementation of efi32_pe_entry() into efi-mixed.S, which is a
more suitable location that only gets built if EFI mixed mode is
actually enabled.

Signed-off-by: Ard Biesheuvel <ardb@xxxxxxxxxx>
Signed-off-by: Borislav Petkov <bp@xxxxxxx>
Link: https://lore.kernel.org/r/20221122161017.2426828-7-ardb@xxxxxxxxxx
---
arch/x86/boot/compressed/efi_mixed.S | 82 +++++++++++++++++++++++++-
arch/x86/boot/compressed/head_64.S | 87 +---------------------------
2 files changed, 83 insertions(+), 86 deletions(-)

diff --git a/arch/x86/boot/compressed/efi_mixed.S b/arch/x86/boot/compressed/efi_mixed.S
index 3487484..8844d8e 100644
--- a/arch/x86/boot/compressed/efi_mixed.S
+++ b/arch/x86/boot/compressed/efi_mixed.S
@@ -257,6 +257,88 @@ SYM_FUNC_START(efi32_entry)
jmp startup_32
SYM_FUNC_END(efi32_entry)

+#define ST32_boottime 60 // offsetof(efi_system_table_32_t, boottime)
+#define BS32_handle_protocol 88 // offsetof(efi_boot_services_32_t, handle_protocol)
+#define LI32_image_base 32 // offsetof(efi_loaded_image_32_t, image_base)
+
+/*
+ * efi_status_t efi32_pe_entry(efi_handle_t image_handle,
+ * efi_system_table_32_t *sys_table)
+ */
+SYM_FUNC_START(efi32_pe_entry)
+ pushl %ebp
+ movl %esp, %ebp
+ pushl %eax // dummy push to allocate loaded_image
+
+ pushl %ebx // save callee-save registers
+ pushl %edi
+
+ call verify_cpu // check for long mode support
+ testl %eax, %eax
+ movl $0x80000003, %eax // EFI_UNSUPPORTED
+ jnz 2f
+
+ call 1f
+1: pop %ebx
+
+ /* Get the loaded image protocol pointer from the image handle */
+ leal -4(%ebp), %eax
+ pushl %eax // &loaded_image
+ leal (loaded_image_proto - 1b)(%ebx), %eax
+ pushl %eax // pass the GUID address
+ pushl 8(%ebp) // pass the image handle
+
+ /*
+ * Note the alignment of the stack frame.
+ * sys_table
+ * handle <-- 16-byte aligned on entry by ABI
+ * return address
+ * frame pointer
+ * loaded_image <-- local variable
+ * saved %ebx <-- 16-byte aligned here
+ * saved %edi
+ * &loaded_image
+ * &loaded_image_proto
+ * handle <-- 16-byte aligned for call to handle_protocol
+ */
+
+ movl 12(%ebp), %eax // sys_table
+ movl ST32_boottime(%eax), %eax // sys_table->boottime
+ call *BS32_handle_protocol(%eax) // sys_table->boottime->handle_protocol
+ addl $12, %esp // restore argument space
+ testl %eax, %eax
+ jnz 2f
+
+ movl 8(%ebp), %ecx // image_handle
+ movl 12(%ebp), %edx // sys_table
+ movl -4(%ebp), %esi // loaded_image
+ movl LI32_image_base(%esi), %esi // loaded_image->image_base
+ leal (startup_32 - 1b)(%ebx), %ebp // runtime address of startup_32
+ /*
+ * We need to set the image_offset variable here since startup_32() will
+ * use it before we get to the 64-bit efi_pe_entry() in C code.
+ */
+ subl %esi, %ebp // calculate image_offset
+ movl %ebp, (image_offset - 1b)(%ebx) // save image_offset
+ xorl %esi, %esi
+ jmp efi32_entry // pass %ecx, %edx, %esi
+ // no other registers remain live
+
+2: popl %edi // restore callee-save registers
+ popl %ebx
+ leave
+ RET
+SYM_FUNC_END(efi32_pe_entry)
+
+ .section ".rodata"
+ /* EFI loaded image protocol GUID */
+ .balign 4
+SYM_DATA_START_LOCAL(loaded_image_proto)
+ .long 0x5b1b31a1
+ .word 0x9562, 0x11d2
+ .byte 0x8e, 0x3f, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b
+SYM_DATA_END(loaded_image_proto)
+
.data
.balign 8
SYM_DATA_START_LOCAL(efi32_boot_gdt)
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 9cd2a28..36f37f9 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -673,6 +673,7 @@ SYM_FUNC_START_LOCAL_NOALIGN(.Lno_longmode)
jmp 1b
SYM_FUNC_END(.Lno_longmode)

+ .globl verify_cpu
#include "../../kernel/verify_cpu.S"

.data
@@ -720,92 +721,6 @@ SYM_DATA_END_LABEL(boot32_idt, SYM_L_GLOBAL, boot32_idt_end)
#ifdef CONFIG_EFI_STUB
SYM_DATA(image_offset, .long 0)
#endif
-#ifdef CONFIG_EFI_MIXED
-#define ST32_boottime 60 // offsetof(efi_system_table_32_t, boottime)
-#define BS32_handle_protocol 88 // offsetof(efi_boot_services_32_t, handle_protocol)
-#define LI32_image_base 32 // offsetof(efi_loaded_image_32_t, image_base)
-
- .text
- .code32
-SYM_FUNC_START(efi32_pe_entry)
-/*
- * efi_status_t efi32_pe_entry(efi_handle_t image_handle,
- * efi_system_table_32_t *sys_table)
- */
-
- pushl %ebp
- movl %esp, %ebp
- pushl %eax // dummy push to allocate loaded_image
-
- pushl %ebx // save callee-save registers
- pushl %edi
-
- call verify_cpu // check for long mode support
- testl %eax, %eax
- movl $0x80000003, %eax // EFI_UNSUPPORTED
- jnz 2f
-
- call 1f
-1: pop %ebx
-
- /* Get the loaded image protocol pointer from the image handle */
- leal -4(%ebp), %eax
- pushl %eax // &loaded_image
- leal (loaded_image_proto - 1b)(%ebx), %eax
- pushl %eax // pass the GUID address
- pushl 8(%ebp) // pass the image handle
-
- /*
- * Note the alignment of the stack frame.
- * sys_table
- * handle <-- 16-byte aligned on entry by ABI
- * return address
- * frame pointer
- * loaded_image <-- local variable
- * saved %ebx <-- 16-byte aligned here
- * saved %edi
- * &loaded_image
- * &loaded_image_proto
- * handle <-- 16-byte aligned for call to handle_protocol
- */
-
- movl 12(%ebp), %eax // sys_table
- movl ST32_boottime(%eax), %eax // sys_table->boottime
- call *BS32_handle_protocol(%eax) // sys_table->boottime->handle_protocol
- addl $12, %esp // restore argument space
- testl %eax, %eax
- jnz 2f
-
- movl 8(%ebp), %ecx // image_handle
- movl 12(%ebp), %edx // sys_table
- movl -4(%ebp), %esi // loaded_image
- movl LI32_image_base(%esi), %esi // loaded_image->image_base
- leal (startup_32 - 1b)(%ebx), %ebp // runtime address of startup_32
- /*
- * We need to set the image_offset variable here since startup_32() will
- * use it before we get to the 64-bit efi_pe_entry() in C code.
- */
- subl %esi, %ebp // calculate image_offset
- movl %ebp, (image_offset - 1b)(%ebx) // save image_offset
- xorl %esi, %esi
- jmp efi32_entry // pass %ecx, %edx, %esi
- // no other registers remain live
-
-2: popl %edi // restore callee-save registers
- popl %ebx
- leave
- RET
-SYM_FUNC_END(efi32_pe_entry)
-
- .section ".rodata"
- /* EFI loaded image protocol GUID */
- .balign 4
-SYM_DATA_START_LOCAL(loaded_image_proto)
- .long 0x5b1b31a1
- .word 0x9562, 0x11d2
- .byte 0x8e, 0x3f, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b
-SYM_DATA_END(loaded_image_proto)
-#endif

#ifdef CONFIG_AMD_MEM_ENCRYPT
__HEAD