[PATCH RFC 0/5] Add IRQC support to RZ/G2UL SoC

[Prabhakar]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>

Hi All,

This patch series does the following:
* Adds IRQC support to the RZ/G2UL SoC.
* Includes a fix for pinctrl driver when using GPIO pins as interrupts
* Adds PHY interrupt support for ETH{0/1}

Reason for sending it as RFC, as I am introducing new compatible string for
RZ/G2UL SoC as there are some differences when compared to RZ/Five:
- G2UL IRQCHIP (hierarchical IRQ domain) -> GIC where as on RZ/Five we have
  PLIC (chained interrupt domain) -> RISCV INTC
- On the RZ/Five we have additional registers for IRQC block
- On the RZ/Five we have BUS_ERR_INT which needs to be handled by IRQC

Cheers,
Prabhakar

Lad Prabhakar (5):
  dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document
    RZ/G2UL SoC
  pinctrl: renesas: rzg2l: Fix configuring the GPIO pins as interrupts
  arm64: dts: renesas: r9a07g043[u]: Add IRQC node
  arm64: dts: renesas: r9a07g043[u]: Update pinctrl node to handle GPIO
    interrupts
  arm64: dts: renesas: rzg2ul-smarc-som: Add PHY interrupt support for
    ETH{0/1}

 .../renesas,rzg2l-irqc.yaml                   |  1 +
 arch/arm64/boot/dts/renesas/r9a07g043.dtsi    | 10 ++++
 arch/arm64/boot/dts/renesas/r9a07g043u.dtsi   | 54 +++++++++++++++++++
 .../boot/dts/renesas/rzg2ul-smarc-som.dtsi    | 11 +++-
 drivers/pinctrl/renesas/pinctrl-rzg2l.c       | 17 +++---
 5 files changed, 84 insertions(+), 9 deletions(-)

-- 
2.25.1