Re: [PATCH 5/7] usb: gadget: udc: add Renesas RZ/N1 USBF controller support

[Geert Uytterhoeven]

Hi Hervé,

On Mon, Nov 7, 2022 at 3:00 PM Herve Codina <herve.codina@xxxxxxxxxxx> wrote:
> Add support for the Renesas USBF controller.
> This controller is an USB2.0 UDC controller available in the
> Renesas r9a06g032 SoC (RZ/N1 family).
>
> Signed-off-by: Herve Codina <herve.codina@xxxxxxxxxxx>

> --- /dev/null
> +++ b/drivers/usb/gadget/udc/renesas_usbf.c

> +struct usbf_udc {
> +       struct usb_gadget               gadget;
> +       struct usb_gadget_driver        *driver;
> +       struct device                   *dev;
> +       struct clk_bulk_data            *clocks;
> +       int                             nclocks;
> +       void __iomem                    *regs;
> +       spinlock_t                      lock;
> +       bool                            is_remote_wakeup;
> +       bool                            is_usb_suspended;
> +       struct usbf_ep                  ep[USBF_NUM_ENDPOINTS];
> +       /* for EP0 control messages */
> +       enum usbf_ep0state              ep0state;
> +       struct usbf_req                 setup_reply;
> +       u8                              ep0_buf[USBF_EP0_MAX_PCKT_SIZE];
> +};

> +static int usbf_probe(struct platform_device *pdev)
> +{
> +       struct device *dev = &pdev->dev;
> +       struct usbf_udc *udc;
> +       struct usbf_ep *ep;
> +       bool h2mode;
> +       int irq;
> +       int ret;
> +       int i;
> +
> +       ret = r9a06g032_sysctrl_get_usb_h2mode(&h2mode);
> +       if (ret)
> +               return ret;
> +       if (h2mode) {
> +               dev_warn(dev, "Disabled in H2 (host) mode\n");
> +               return -ENODEV;
> +       }
> +
> +       udc = devm_kzalloc(dev, sizeof(*udc), GFP_KERNEL);
> +       if (!udc)
> +               return -ENOMEM;
> +       platform_set_drvdata(pdev, udc);
> +
> +       udc->dev = dev;
> +       spin_lock_init(&udc->lock);
> +
> +       udc->regs = devm_platform_ioremap_resource(pdev, 0);
> +       if (IS_ERR(udc->regs))
> +               return PTR_ERR(udc->regs);
> +
> +       devm_pm_runtime_enable(&pdev->dev);
> +       ret = pm_runtime_resume_and_get(&pdev->dev);
> +       if (ret < 0)
> +               return ret;
> +
> +       ret = devm_clk_bulk_get_all(dev, &udc->clocks);
> +       if (ret < 1) {
> +               dev_err(dev, "failed to get clocks %d\n", ret);
> +               return ret;
> +       }
> +       udc->nclocks = ret;
> +
> +       ret = clk_bulk_prepare_enable(udc->nclocks, udc->clocks);
> +       if (ret) {
> +               dev_err(dev, "can not enable the clock\n");
> +               return ret;
> +       }

As this driver only enables/disables the clocks, perhaps you could
just delegate this to Runtime PM (through the clock domain pointed
by the power-domains property in DT), and drop the .clocks and
.nclocks fields?

> +clk_disable:
> +       clk_bulk_disable_unprepare(udc->nclocks, udc->clocks);
> +       return ret;
> +}
> +
> +static int usbf_remove(struct platform_device *pdev)
> +{
> +       struct usbf_udc *udc = platform_get_drvdata(pdev);
> +
> +       usb_del_gadget_udc(&udc->gadget);
> +
> +       clk_bulk_disable_unprepare(udc->nclocks, udc->clocks);
> +
> +       pm_runtime_put(&pdev->dev);
> +
> +       return 0;
> +}

> +MODULE_AUTHOR("Herve Codina <herve.codina@xxxxxxxxxxx>");

Hervé? ;-)

> +MODULE_DESCRIPTION("Renesas R-Car Gen3 & RZ/N1 USB Function driver");
> +MODULE_LICENSE("GPL");

> --
> 2.37.3
>


--
Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds