Re: [PATCH v2 2/2] iio: pressure: bmp280: convert to i2c's .probe_new()

[Jonathan Cameron]

On Sun,  6 Nov 2022 17:43:16 +0100
Angel Iglesias <ang.iglesiasg@xxxxxxxxx> wrote:

> Use i2c_client_get_device_id() to get the i2c_device_id* parameter in the
> .new_probe() callback.
> 
> Signed-off-by: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>

I'm fine with Wolfram picking this up as an example of using the new code,
or I can take it through IIO after merging Wolfram's immutable branch.

So for option 1:
Acked-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>

> 
> diff --git a/drivers/iio/pressure/bmp280-i2c.c b/drivers/iio/pressure/bmp280-i2c.c
> index 0c27211f3ea0..14eab086d24a 100644
> --- a/drivers/iio/pressure/bmp280-i2c.c
> +++ b/drivers/iio/pressure/bmp280-i2c.c
> @@ -5,11 +5,11 @@
>  
>  #include "bmp280.h"
>  
> -static int bmp280_i2c_probe(struct i2c_client *client,
> -			    const struct i2c_device_id *id)
> +static int bmp280_i2c_probe(struct i2c_client *client)
>  {
>  	struct regmap *regmap;
>  	const struct regmap_config *regmap_config;
> +	const struct i2c_device_id *id = i2c_client_get_device_id(client);
>  
>  	switch (id->driver_data) {
>  	case BMP180_CHIP_ID:
> @@ -65,7 +65,7 @@ static struct i2c_driver bmp280_i2c_driver = {
>  		.of_match_table = bmp280_of_i2c_match,
>  		.pm = pm_ptr(&bmp280_dev_pm_ops),
>  	},
> -	.probe		= bmp280_i2c_probe,
> +	.probe_new	= bmp280_i2c_probe,
>  	.id_table	= bmp280_i2c_id,
>  };
>  module_i2c_driver(bmp280_i2c_driver);