Re: [PATCH v2 1/3] arm64: dts: qcom: msm8916-alcatel-idol347: Add GPIOs -state suffix

[Konrad Dybcio]

On 04/11/2022 14:23, Vincent Knecht wrote:
> Add -state suffix to GPIOs states node names as required by dt-bindings.
>
> Signed-off-by: Vincent Knecht <vincent.knecht@xxxxxxxxxx>
> ---

Reviewed-by Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>


Konrad

>   .../boot/dts/qcom/msm8916-alcatel-idol347.dts      | 14 +++++++-------
>   1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
> index 3dc9619fde6e..668f8ff53229 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
> @@ -260,7 +260,7 @@ l18 {
>   };
>   
>   &msmgpio {
> -	accel_int_default: accel-int-default {
> +	accel_int_default: accel-int-default-state {
>   		pins = "gpio31";
>   		function = "gpio";
>   
> @@ -268,7 +268,7 @@ accel_int_default: accel-int-default {
>   		bias-disable;
>   	};
>   
> -	gpio_keys_default: gpio-keys-default {
> +	gpio_keys_default: gpio-keys-default-state {
>   		pins = "gpio107";
>   		function = "gpio";
>   
> @@ -276,7 +276,7 @@ gpio_keys_default: gpio-keys-default {
>   		bias-pull-up;
>   	};
>   
> -	gyro_int_default: gyro-int-default {
> +	gyro_int_default: gyro-int-default-state {
>   		pins = "gpio97", "gpio98";
>   		function = "gpio";
>   
> @@ -284,7 +284,7 @@ gyro_int_default: gyro-int-default {
>   		bias-disable;
>   	};
>   
> -	mag_reset_default: mag-reset-default {
> +	mag_reset_default: mag-reset-default-state {
>   		pins = "gpio8";
>   		function = "gpio";
>   
> @@ -292,7 +292,7 @@ mag_reset_default: mag-reset-default {
>   		bias-disable;
>   	};
>   
> -	proximity_int_default: proximity-int-default {
> +	proximity_int_default: proximity-int-default-state {
>   		pins = "gpio12";
>   		function = "gpio";
>   
> @@ -300,7 +300,7 @@ proximity_int_default: proximity-int-default {
>   		bias-pull-up;
>   	};
>   
> -	ts_int_reset_default: ts-int-reset-default {
> +	ts_int_reset_default: ts-int-reset-default-state {
>   		pins = "gpio13", "gpio100";
>   		function = "gpio";
>   
> @@ -308,7 +308,7 @@ ts_int_reset_default: ts-int-reset-default {
>   		bias-disable;
>   	};
>   
> -	usb_id_default: usb-id-default {
> +	usb_id_default: usb-id-default-state {
>   		pins = "gpio69";
>   		function = "gpio";
>