RE: [PATCH v4 0/5] gpio: add suspend/resume support for i.mx8x SoCs

[Shenwei Wang]

> -----Original Message-----
> Subject: [PATCH v4 0/5] gpio: add suspend/resume support for i.mx8x SoCs
> 
> On i.MX8QM/QXP/DXL SoCs, even a GPIO is selected as the wakeup source, the
> GPIO block will be powered off when system enters into suspend state. This can
> greatly reduce the power consumption of suspend state because the whole
> partition can be shutdown. This is called PAD wakeup feature on i.MX8x
> platform.
> 
> This series of patches enable this wakeup feature on i.MX8QM/QXP/DXL
> platforms.
> 
> Changes in v4:
>  - fixed the format issues reported by Peng Fan.
>  - change the return type of mxc_gpio_generic_config, and limit the
>    suspend/resume behavior changes only on i.MX8QM/QXP/DXL platform.
> 

A soft ping. 😊

Regards,
Shenwei

> Changes in v3:
>  - According to the feedback from Linus Walleij, the wakeup feature is
>    moved to pinctrl driver, and the array of gpio-pin mapping is moved
>    to gpio device node and initialized via gpio-ranges property.
> 
> Shenwei Wang (5):
>   arm64: dts: imx8dxl-ss-lsio: add gpio-ranges property
>   arm64: dts: imx8qm-ss-lsio: add gpio-ranges property
>   arm64: dts: imx8qxp-ss-lsio: add gpio-ranges property
>   pinctrl: freescale: add pad wakeup config
>   gpio: mxc: enable pad wakeup on i.MX8x platforms
> 
>  .../boot/dts/freescale/imx8dxl-ss-lsio.dtsi   | 41 +++++++++
>  .../boot/dts/freescale/imx8qm-ss-lsio.dtsi    | 38 ++++++++
>  .../boot/dts/freescale/imx8qxp-ss-lsio.dtsi   | 25 +++++
>  drivers/gpio/gpio-mxc.c                       | 92 ++++++++++++++++++-
>  drivers/pinctrl/freescale/pinctrl-scu.c       | 30 ++++++
>  5 files changed, 225 insertions(+), 1 deletion(-)
> 
> --
> 2.34.1