Re: [PATCH 00/11] AM65x Disable Incomplete DT Nodes
From: Jan Kiszka
Date: Thu Nov 03 2022 - 09:20:53 EST
On 28.10.22 16:24, Andrew Davis wrote:
> Hello all,
>
> Same story as for AM64x[0], AM62x[1], and J7x[2].
>
> Last round for AM65x, but there are some boards that I do not have
> (Simatic IOT2050), so testing very welcome!
>
> Thanks,
> Andrew
>
> [0] https://www.spinics.net/lists/arm-kernel/msg1018532.html
> [1] https://www.spinics.net/lists/arm-kernel/msg1018864.html
> [2] https://www.spinics.net/lists/arm-kernel/msg1019544.html
>
> Andrew Davis (11):
> arm64: dts: ti: k3-am65: Enable UART nodes at the board level
> arm64: dts: ti: k3-am65: Enable I2C nodes at the board level
> arm64: dts: ti: k3-am65: Enable SPI nodes at the board level
> arm64: dts: ti: k3-am65: Enable EPWM nodes at the board level
> arm64: dts: ti: k3-am65: Enable ECAP nodes at the board level
> arm64: dts: ti: k3-am65: MDIO pinmux should belong to the MDIO node
> arm64: dts: ti: k3-am65: Enable MDIO nodes at the board level
> arm64: dts: ti: k3-am65: Enable MCAN nodes at the board level
> arm64: dts: ti: k3-am65: Enable PCIe nodes at the board level
> arm64: dts: ti: k3-am65: Enable Mailbox nodes at the board level
> arm64: dts: ti: k3-am65: Enable McASP nodes at the board level
>
> .../boot/dts/ti/k3-am65-iot2050-common.dtsi | 101 ++--------------
> arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 41 +++++++
> arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 18 ++-
> arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 2 +
> .../ti/k3-am6528-iot2050-basic-common.dtsi | 1 +
> .../arm64/boot/dts/ti/k3-am654-base-board.dts | 113 ++++--------------
> .../ti/k3-am6548-iot2050-advanced-common.dtsi | 4 -
> 7 files changed, 94 insertions(+), 186 deletions(-)
>
(widely)
Tested-by: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
We are still seeing some likely unrelated issue on our latest board with
mainline. Not all aspects could be tested for that reason, but I
strongly suspect that this series won't break those.
Jan
--
Siemens AG, Technology
Competence Center Embedded Linux