[v2 3/3] hwmon: Add Aspeed ast2600 TACH support

[Billy Tsai]

This patch add the support of Tachometer which can use to monitor the
frequency of the input. The tach supports up to 16 channels and it's part
function of multi-function device "pwm-tach controller".

Signed-off-by: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
---
 Documentation/hwmon/tach-aspeed-ast2600.rst |  28 ++
 drivers/hwmon/Kconfig                       |   9 +
 drivers/hwmon/Makefile                      |   1 +
 drivers/hwmon/tach-aspeed-ast2600.c         | 484 ++++++++++++++++++++
 4 files changed, 522 insertions(+)
 create mode 100644 Documentation/hwmon/tach-aspeed-ast2600.rst
 create mode 100644 drivers/hwmon/tach-aspeed-ast2600.c

diff --git a/Documentation/hwmon/tach-aspeed-ast2600.rst b/Documentation/hwmon/tach-aspeed-ast2600.rst
new file mode 100644
index 000000000000..8967f60672dc
--- /dev/null
+++ b/Documentation/hwmon/tach-aspeed-ast2600.rst
@@ -0,0 +1,28 @@
+Kernel driver tach-aspeed-ast2600
+==============================
+
+Supported chips:
+	ASPEED AST2600
+
+Authors:
+	<billy_tsai@xxxxxxxxxxxxxx>
+
+Description:
+------------
+This driver implements support for ASPEED AST2600 Fan Tacho controller.
+The controller supports up to 16 tachometer inputs.
+
+The driver provides the following sensor accesses in sysfs:
+=============== ======= =====================================================
+fanX_input	ro	provide current fan rotation value in RPM as reported
+			by the fan to the device.
+fanX_div	rw	Fan divisor: Supported value are power of 4 (1, 4, 16
+                        64, ... 4194304)
+                        The larger divisor, the less rpm accuracy and the less
+                        affected by fan signal glitch.
+fanX_min	rw      Fan minimum RPM which can used to change the timeout
+                        value for controller polling the result.
+fanX_max	rw      Fan maximum RPM which can used to change the polling
+                        period of the driver.
+fanX_pulses	rw      Fan pulses per resolution.
+=============== ======= ======================================================
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index fa2356398744..a84c15b73aa6 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -397,6 +397,15 @@ config SENSORS_ASPEED
 	  This driver can also be built as a module. If so, the module
 	  will be called aspeed_pwm_tacho.
 
+config SENSORS_TACH_ASPEED_AST2600
+	tristate "ASPEED ast2600 Tachometer support"
+	select REGMAP
+	help
+	  This driver provides support for Aspeed ast2600 Tachometer.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called tach-aspeed-ast2600.
+
 config SENSORS_ATXP1
 	tristate "Attansic ATXP1 VID controller"
 	depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index d2497b2644e6..7e2d708e93b8 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_SENSORS_ARM_SCMI)	+= scmi-hwmon.o
 obj-$(CONFIG_SENSORS_ARM_SCPI)	+= scpi-hwmon.o
 obj-$(CONFIG_SENSORS_AS370)	+= as370-hwmon.o
 obj-$(CONFIG_SENSORS_ASC7621)	+= asc7621.o
+obj-$(CONFIG_SENSORS_TACH_ASPEED_AST2600) += tach-aspeed-ast2600.o
 obj-$(CONFIG_SENSORS_ASPEED)	+= aspeed-pwm-tacho.o
 obj-$(CONFIG_SENSORS_ATXP1)	+= atxp1.o
 obj-$(CONFIG_SENSORS_AXI_FAN_CONTROL) += axi-fan-control.o
diff --git a/drivers/hwmon/tach-aspeed-ast2600.c b/drivers/hwmon/tach-aspeed-ast2600.c
new file mode 100644
index 000000000000..599ed5db17a8
--- /dev/null
+++ b/drivers/hwmon/tach-aspeed-ast2600.c
@@ -0,0 +1,484 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) ASPEED Technology Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/sysfs.h>
+#include <linux/reset.h>
+#include <linux/regmap.h>
+#include <linux/bitfield.h>
+
+/* The channel number of Aspeed tach controller */
+#define TACH_ASPEED_NR_TACHS 16
+/* TACH Control Register */
+#define TACH_ASPEED_CTRL(ch) (((ch) * 0x10) + 0x08)
+#define TACH_ASPEED_IER BIT(31)
+#define TACH_ASPEED_INVERS_LIMIT BIT(30)
+#define TACH_ASPEED_LOOPBACK BIT(29)
+#define TACH_ASPEED_ENABLE BIT(28)
+#define TACH_ASPEED_DEBOUNCE_MASK GENMASK(27, 26)
+#define TACH_ASPEED_DEBOUNCE_BIT (26)
+#define TACH_ASPEED_IO_EDGE_MASK GENMASK(25, 24)
+#define TACH_ASPEED_IO_EDGE_BIT (24)
+#define TACH_ASPEED_CLK_DIV_T_MASK GENMASK(23, 20)
+#define TACH_ASPEED_CLK_DIV_BIT (20)
+#define TACH_ASPEED_THRESHOLD_MASK GENMASK(19, 0)
+/* [27:26] */
+#define DEBOUNCE_3_CLK 0x00
+#define DEBOUNCE_2_CLK 0x01
+#define DEBOUNCE_1_CLK 0x02
+#define DEBOUNCE_0_CLK 0x03
+/* [25:24] */
+#define F2F_EDGES 0x00
+#define R2R_EDGES 0x01
+#define BOTH_EDGES 0x02
+/* [23:20] */
+/* divisor = 4 to the nth power, n = register value */
+#define DEFAULT_TACH_DIV 1024
+#define DIV_TO_REG(divisor) (ilog2(divisor) >> 1)
+
+/* TACH Status Register */
+#define TACH_ASPEED_STS(ch) (((ch) * 0x10) + 0x0C)
+
+/*PWM_TACH_STS */
+#define TACH_ASPEED_ISR BIT(31)
+#define TACH_ASPEED_PWM_OUT BIT(25)
+#define TACH_ASPEED_PWM_OEN BIT(24)
+#define TACH_ASPEED_DEB_INPUT BIT(23)
+#define TACH_ASPEED_RAW_INPUT BIT(22)
+#define TACH_ASPEED_VALUE_UPDATE BIT(21)
+#define TACH_ASPEED_FULL_MEASUREMENT BIT(20)
+#define TACH_ASPEED_VALUE_MASK GENMASK(19, 0)
+/**********************************************************
+ * Software setting
+ *********************************************************/
+#define DEFAULT_FAN_MIN_RPM 1000
+#define DEFAULT_FAN_PULSE_PR 2
+/*
+ * Add this value to avoid CPU consuming a lot of resources in waiting rpm
+ * updating. Assume the max rpm of fan is 60000, the fastest period of updating
+ * tach value will be equal to (1000000 * 2 * 60) / (2 * max_rpm) = 1000us.
+ */
+#define DEFAULT_FAN_MAX_RPM 60000
+
+struct aspeed_tach_channel_params {
+	int limited_inverse;
+	u16 threshold;
+	u8 tach_edge;
+	u8 tach_debounce;
+	u8 pulse_pr;
+	u32 min_rpm;
+	u32 max_rpm;
+	u32 divisor;
+	u32 sample_period; /* unit is us */
+	u32 polling_period; /* unit is us */
+};
+
+struct aspeed_tach_data {
+	struct device *dev;
+	struct regmap *regmap;
+	struct clk *clk;
+	struct reset_control *reset;
+	bool tach_present[TACH_ASPEED_NR_TACHS];
+	struct aspeed_tach_channel_params *tach_channel;
+};
+
+static void aspeed_update_tach_sample_period(struct aspeed_tach_data *priv,
+					     u8 fan_tach_ch)
+{
+	u32 tach_period_us;
+	u8 pulse_pr = priv->tach_channel[fan_tach_ch].pulse_pr;
+	u32 min_rpm = priv->tach_channel[fan_tach_ch].min_rpm;
+
+	/*
+	 * min(Tach input clock) = (PulsePR * minRPM) / 60
+	 * max(Tach input period) = 60 / (PulsePR * minRPM)
+	 * Tach sample period > 2 * max(Tach input period) = (2*60) / (PulsePR * minRPM)
+	 */
+	tach_period_us = (USEC_PER_SEC * 2 * 60) / (pulse_pr * min_rpm);
+	/* Add the margin (about 1.5) of tach sample period to avoid sample miss */
+	tach_period_us = (tach_period_us * 1500) >> 10;
+	dev_dbg(priv->dev, "tach%d sample period = %dus", fan_tach_ch, tach_period_us);
+	priv->tach_channel[fan_tach_ch].sample_period = tach_period_us;
+}
+
+static void aspeed_update_tach_polling_period(struct aspeed_tach_data *priv,
+					     u8 fan_tach_ch)
+{
+	u32 tach_period_us;
+	u8 pulse_pr = priv->tach_channel[fan_tach_ch].pulse_pr;
+	u32 max_rpm = priv->tach_channel[fan_tach_ch].max_rpm;
+
+	tach_period_us = (USEC_PER_SEC * 2 * 60) / (pulse_pr * max_rpm);
+	dev_dbg(priv->dev, "tach%d polling period = %dus", fan_tach_ch, tach_period_us);
+	priv->tach_channel[fan_tach_ch].polling_period = tach_period_us;
+}
+
+static void aspeed_tach_ch_enable(struct aspeed_tach_data *priv, u8 tach_ch,
+				  bool enable)
+{
+	if (enable)
+		regmap_set_bits(priv->regmap, TACH_ASPEED_CTRL(tach_ch),
+				TACH_ASPEED_ENABLE);
+	else
+		regmap_clear_bits(priv->regmap, TACH_ASPEED_CTRL(tach_ch),
+				   TACH_ASPEED_ENABLE);
+}
+
+static int aspeed_get_fan_tach_ch_rpm(struct aspeed_tach_data *priv,
+				      u8 fan_tach_ch)
+{
+	u32 raw_data, tach_div, val;
+	unsigned long clk_source;
+	u64 rpm;
+	int ret;
+
+	/* Restart the Tach channel to guarantee the value is fresh */
+	aspeed_tach_ch_enable(priv, fan_tach_ch, false);
+	aspeed_tach_ch_enable(priv, fan_tach_ch, true);
+	ret = regmap_read_poll_timeout(
+		priv->regmap, TACH_ASPEED_STS(fan_tach_ch), val,
+		(val & TACH_ASPEED_FULL_MEASUREMENT) &&
+			(val & TACH_ASPEED_VALUE_UPDATE),
+		priv->tach_channel[fan_tach_ch].polling_period,
+		priv->tach_channel[fan_tach_ch].sample_period);
+
+	if (ret) {
+		/* return 0 if we didn't get an answer because of timeout*/
+		if (ret == -ETIMEDOUT)
+			return 0;
+		else
+			return ret;
+	}
+
+	raw_data = val & TACH_ASPEED_VALUE_MASK;
+	/*
+	 * We need the mode to determine if the raw_data is double (from
+	 * counting both edges).
+	 */
+	if (priv->tach_channel[fan_tach_ch].tach_edge == BOTH_EDGES)
+		raw_data <<= 1;
+
+	tach_div = raw_data * (priv->tach_channel[fan_tach_ch].divisor) *
+		   (priv->tach_channel[fan_tach_ch].pulse_pr);
+
+	clk_source = clk_get_rate(priv->clk);
+	dev_dbg(priv->dev, "clk %ld, raw_data %d , tach_div %d\n", clk_source,
+		raw_data, tach_div);
+
+	if (tach_div == 0)
+		return -EDOM;
+
+	rpm = (u64)clk_source * 60;
+	do_div(rpm, tach_div);
+
+	return rpm;
+}
+
+static int aspeed_tach_hwmon_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
+			int channel, long *val)
+{
+	struct aspeed_tach_data *priv = dev_get_drvdata(dev);
+	u32 reg_val;
+	int ret;
+
+	switch (attr) {
+	case hwmon_fan_input:
+		ret = aspeed_get_fan_tach_ch_rpm(priv, channel);
+		if (ret < 0)
+			return ret;
+		*val = ret;
+		break;
+	case hwmon_fan_min:
+		*val = priv->tach_channel[channel].min_rpm;
+		break;
+	case hwmon_fan_max:
+		*val = priv->tach_channel[channel].max_rpm;
+		break;
+	case hwmon_fan_div:
+		regmap_read(priv->regmap, TACH_ASPEED_CTRL(channel), &reg_val);
+		reg_val = FIELD_GET(TACH_ASPEED_CLK_DIV_T_MASK, reg_val);
+		*val = 1 << (reg_val << 1);
+		break;
+	case hwmon_fan_pulses:
+		*val = priv->tach_channel[channel].pulse_pr;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+	return 0;
+}
+
+static int aspeed_tach_hwmon_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
+			 int channel, long val)
+{
+	struct aspeed_tach_data *priv = dev_get_drvdata(dev);
+
+	switch (attr) {
+	case hwmon_fan_min:
+		priv->tach_channel[channel].min_rpm = val;
+		aspeed_update_tach_sample_period(priv, channel);
+		break;
+	case hwmon_fan_max:
+		priv->tach_channel[channel].max_rpm = val;
+		aspeed_update_tach_polling_period(priv, channel);
+		break;
+	case hwmon_fan_div:
+		if ((is_power_of_2(val) && !(ilog2(val) % 2))) {
+			priv->tach_channel[channel].divisor = val;
+			regmap_write_bits(
+				priv->regmap, TACH_ASPEED_CTRL(channel),
+				TACH_ASPEED_CLK_DIV_T_MASK,
+				DIV_TO_REG(priv->tach_channel[channel].divisor)
+					<< TACH_ASPEED_CLK_DIV_BIT);
+		} else {
+			dev_err(dev,
+				"fan_div value %ld not supported. Only support power of 4\n",
+				val);
+			return -EINVAL;
+		}
+		break;
+	case hwmon_fan_pulses:
+		priv->tach_channel[channel].pulse_pr = val;
+		aspeed_update_tach_sample_period(priv, channel);
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static umode_t aspeed_tach_dev_is_visible(const void *drvdata, enum hwmon_sensor_types type,
+				  u32 attr, int channel)
+{
+	const struct aspeed_tach_data *priv = drvdata;
+
+	if (!priv->tach_present[channel])
+		return 0;
+	switch (attr) {
+	case hwmon_fan_input:
+		return 0444;
+	case hwmon_fan_min:
+	case hwmon_fan_max:
+	case hwmon_fan_div:
+	case hwmon_fan_pulses:
+		return 0644;
+	}
+	return 0;
+}
+
+static const struct hwmon_ops aspeed_tach_ops = {
+	.is_visible = aspeed_tach_dev_is_visible,
+	.read = aspeed_tach_hwmon_read,
+	.write = aspeed_tach_hwmon_write,
+};
+
+static const struct hwmon_channel_info *aspeed_tach_info[] = {
+	HWMON_CHANNEL_INFO(fan,
+			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX |
+				   HWMON_F_DIV | HWMON_F_PULSES,
+			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX |
+				   HWMON_F_DIV | HWMON_F_PULSES,
+			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX |
+				   HWMON_F_DIV | HWMON_F_PULSES,
+			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX |
+				   HWMON_F_DIV | HWMON_F_PULSES,
+			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX |
+				   HWMON_F_DIV | HWMON_F_PULSES,
+			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX |
+				   HWMON_F_DIV | HWMON_F_PULSES,
+			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX |
+				   HWMON_F_DIV | HWMON_F_PULSES,
+			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX |
+				   HWMON_F_DIV | HWMON_F_PULSES,
+			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX |
+				   HWMON_F_DIV | HWMON_F_PULSES,
+			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX |
+				   HWMON_F_DIV | HWMON_F_PULSES,
+			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX |
+				   HWMON_F_DIV | HWMON_F_PULSES,
+			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX |
+				   HWMON_F_DIV | HWMON_F_PULSES,
+			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX |
+				   HWMON_F_DIV | HWMON_F_PULSES,
+			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX |
+				   HWMON_F_DIV | HWMON_F_PULSES,
+			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX |
+				   HWMON_F_DIV | HWMON_F_PULSES,
+			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX |
+				   HWMON_F_DIV | HWMON_F_PULSES),
+	NULL
+};
+
+static const struct hwmon_chip_info aspeed_tach_chip_info = {
+	.ops = &aspeed_tach_ops,
+	.info = aspeed_tach_info,
+};
+
+static void aspeed_create_fan_tach_channel(struct aspeed_tach_data *priv,
+					   u32 tach_ch)
+{
+	priv->tach_present[tach_ch] = true;
+	priv->tach_channel[tach_ch].limited_inverse = 0;
+	regmap_write_bits(priv->regmap, TACH_ASPEED_CTRL(tach_ch),
+			  TACH_ASPEED_INVERS_LIMIT,
+			  priv->tach_channel[tach_ch].limited_inverse ?
+				  TACH_ASPEED_INVERS_LIMIT :
+				  0);
+
+	priv->tach_channel[tach_ch].tach_debounce = DEBOUNCE_3_CLK;
+	regmap_write_bits(priv->regmap, TACH_ASPEED_CTRL(tach_ch),
+			  TACH_ASPEED_DEBOUNCE_MASK,
+			  priv->tach_channel[tach_ch].tach_debounce
+				  << TACH_ASPEED_DEBOUNCE_BIT);
+
+	priv->tach_channel[tach_ch].tach_edge = F2F_EDGES;
+	regmap_write_bits(priv->regmap, TACH_ASPEED_CTRL(tach_ch),
+			  TACH_ASPEED_IO_EDGE_MASK,
+			  priv->tach_channel[tach_ch].tach_edge
+				  << TACH_ASPEED_IO_EDGE_BIT);
+
+	priv->tach_channel[tach_ch].divisor = DEFAULT_TACH_DIV;
+	regmap_write_bits(priv->regmap, TACH_ASPEED_CTRL(tach_ch),
+			  TACH_ASPEED_CLK_DIV_T_MASK,
+			  DIV_TO_REG(priv->tach_channel[tach_ch].divisor)
+				  << TACH_ASPEED_CLK_DIV_BIT);
+
+	priv->tach_channel[tach_ch].threshold = 0;
+	regmap_write_bits(priv->regmap, TACH_ASPEED_CTRL(tach_ch),
+			  TACH_ASPEED_THRESHOLD_MASK,
+			  priv->tach_channel[tach_ch].threshold);
+
+	priv->tach_channel[tach_ch].pulse_pr = DEFAULT_FAN_PULSE_PR;
+	priv->tach_channel[tach_ch].min_rpm = DEFAULT_FAN_MIN_RPM;
+	aspeed_update_tach_sample_period(priv, tach_ch);
+
+	priv->tach_channel[tach_ch].max_rpm = DEFAULT_FAN_MAX_RPM;
+	aspeed_update_tach_polling_period(priv, tach_ch);
+
+	aspeed_tach_ch_enable(priv, tach_ch, true);
+}
+
+static int aspeed_tach_create_fan(struct device *dev, struct device_node *child,
+				  struct aspeed_tach_data *priv)
+{
+	u32 tach_channel;
+	int ret;
+
+	ret = of_property_read_u32(child, "reg", &tach_channel);
+	if (ret)
+		return ret;
+
+	aspeed_create_fan_tach_channel(priv, tach_channel);
+
+	return 0;
+}
+
+static void aspeed_tach_reset_assert(void *data)
+{
+	struct reset_control *rst = data;
+
+	reset_control_assert(rst);
+}
+
+static int aspeed_tach_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np, *child;
+	struct aspeed_tach_data *priv;
+	struct device *hwmon;
+	struct platform_device *parent_dev;
+	int ret;
+
+	np = dev->parent->of_node;
+	if (!of_device_is_compatible(np, "aspeed,ast2600-pwm-tach"))
+		return dev_err_probe(dev, -ENODEV,
+				     "Unsupported tach device binding\n");
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	priv->dev = &pdev->dev;
+	priv->tach_channel =
+		devm_kzalloc(dev,
+			     TACH_ASPEED_NR_TACHS * sizeof(*priv->tach_channel),
+			     GFP_KERNEL);
+
+	priv->regmap = syscon_node_to_regmap(np);
+	if (IS_ERR(priv->regmap)) {
+		dev_err(priv->dev, "Couldn't get regmap\n");
+		return -ENODEV;
+	}
+	parent_dev = of_find_device_by_node(np);
+	priv->clk = devm_clk_get_enabled(&parent_dev->dev, 0);
+	if (IS_ERR(priv->clk))
+		return dev_err_probe(dev, PTR_ERR(priv->clk),
+				     "Couldn't get clock\n");
+
+	priv->reset = devm_reset_control_get_shared(&parent_dev->dev, NULL);
+	if (IS_ERR(priv->reset))
+		return dev_err_probe(dev, PTR_ERR(priv->reset),
+				     "Couldn't get reset control\n");
+
+	ret = reset_control_deassert(priv->reset);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Couldn't deassert reset control\n");
+
+	ret = devm_add_action_or_reset(dev, aspeed_tach_reset_assert,
+				       priv->reset);
+	if (ret)
+		return ret;
+
+	for_each_child_of_node(dev->of_node, child) {
+		ret = aspeed_tach_create_fan(dev, child, priv);
+		if (ret) {
+			of_node_put(child);
+			return ret;
+		}
+	}
+
+	hwmon = devm_hwmon_device_register_with_info(
+		dev, "aspeed_tach", priv, &aspeed_tach_chip_info, NULL);
+	ret = PTR_ERR_OR_ZERO(hwmon);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Failed to register hwmon device\n");
+	return 0;
+}
+
+static const struct of_device_id of_stach_match_table[] = {
+	{
+		.compatible = "aspeed,ast2600-tach",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, of_stach_match_table);
+
+static struct platform_driver aspeed_tach_driver = {
+	.probe		= aspeed_tach_probe,
+	.driver		= {
+		.name	= "aspeed_tach",
+		.of_match_table = of_stach_match_table,
+	},
+};
+
+module_platform_driver(aspeed_tach_driver);
+
+MODULE_AUTHOR("Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("Aspeed ast2600 TACH device driver");
+MODULE_LICENSE("GPL v2");
+
-- 
2.25.1