Re: [PATCH V3 08/21] phy: tegra: p2u: Set ENABLE_L2_EXIT_RATE_CHANGE in calibration

[Vinod Koul]

On 14-10-22, 00:08, Vidya Sagar wrote:
> Set ENABLE_L2_EXIT_RATE_CHANGE register bit to request UPHY PLL rate change
> to Gen1 during initialization. This helps in the below surprise link down
> cases,
>   - Surprise link down happens at Gen3/Gen4 link speed.
>   - Surprise link down happens and external REFCLK is cut off, which causes
> UPHY PLL rate to deviate to an invalid rate.

Applied, thanks

-- 
~Vinod