Re: [PATCH v3 1/2] dt-bindings: mtd: marvell-nand: Convert to YAML DT scheme
From: Krzysztof Kozlowski
Date: Mon Oct 24 2022 - 19:12:04 EST
On 24/10/2022 17:01, Vadym Kochan wrote:
> Switch the DT binding to a YAML schema to enable the DT validation.
>
> Dropped deprecated compatibles and properties described in txt file.
>
> Signed-off-by: Vadym Kochan <vadym.kochan@xxxxxxxxxxx>
> ---
>
> v3:
> 1) Remove txt version from the MAINTAINERS list
>
> 2) Use enum for some of compatible strings
>
> 3) Drop:
> #address-cells
> #size-cells:
>
> as they are inherited from the nand-controller.yaml
>
> 4) Add restriction to use 2 clocks for A8K SoC
>
> 5) Dropped description for clock-names and extend it with
> minItems: 1
>
> 6) Drop description for "dmas"
>
> 7) Use "unevalautedProperties: false"
Hmm... In one place it makes sense. In "nand@" not really.
>
> 8) Drop quites from yaml refs.
>
> 9) Use 4-space indentation for the example section
>
> v2:
> 1) Fixed warning by yamllint with incorrect indentation for compatible list
>
> .../bindings/mtd/marvell,nand-controller.yaml | 189 ++++++++++++++++++
> .../devicetree/bindings/mtd/marvell-nand.txt | 126 ------------
> MAINTAINERS | 1 -
> 3 files changed, 189 insertions(+), 127 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
> delete mode 100644 Documentation/devicetree/bindings/mtd/marvell-nand.txt
>
> diff --git a/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
> new file mode 100644
> index 000000000000..cb20f14d4aea
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
> @@ -0,0 +1,189 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mtd/marvell,nand-controller.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Marvell NAND Flash Controller (NFC)
> +
> +maintainers:
> + - Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
> +
> +properties:
> + compatible:
> + oneOf:
> + - items:
> + - const: marvell,armada-8k-nand-controller
> + - const: marvell,armada370-nand-controller
> + - enum:
> + - marvell,armada370-nand-controller
> + - marvell,pxa3xx-nand-controller
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + minItems: 1
> + maxItems: 2
> + description:
> + Shall reference the NAND controller clocks, the second one is
> + is only needed for the Armada 7K/8K SoCs
> +
> + clock-names:
> + minItems: 1
> + items:
> + - const: core
> + - const: reg
> +
> + dmas:
> + maxItems: 1
> +
> + dma-names:
> + items:
> + - const: rxtx
> +
> + marvell,system-controller:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description: Syscon node that handles NAND controller related registers
> +
> +patternProperties:
> + "^nand@[0-3]$":
> + type: object
> + properties:
> + reg:
> + minimum: 0
> + maximum: 3
> +
> + nand-rb:
> + minimum: 0
> + maximum: 1
> +
> + nand-ecc-strength:
> + enum: [1, 4, 8]
> +
> + nand-on-flash-bbt: true
> +
> + nand-ecc-mode: true
> +
> + nand-ecc-algo:
> + description: |
> + This property is essentially useful when not using hardware ECC.
> + Howerver, it may be added when using hardware ECC for clarification
> + but will be ignored by the driver because ECC mode is chosen depending
> + on the page size and the strength required by the NAND chip.
> + This value may be overwritten with nand-ecc-strength property.
> +
> + nand-ecc-step-size:
> + description: |
> + Marvell's NAND flash controller does use fixed strength
> + (1-bit for Hamming, 16-bit for BCH), so the actual step size
> + will shrink or grow in order to fit the required strength.
> + Step sizes are not completely random for all and follow certain
> + patterns described in AN-379, "Marvell SoC NFC ECC".
> +
> + label:
> + $ref: /schemas/types.yaml#/definitions/string
> +
> + partitions:
> + type: object
> + $ref: /schemas/mtd/partitions/partition.yaml
This is a friendly reminder during the review process.
It seems my previous comments were not fully addressed. Maybe my
feedback got lost between the quotes, maybe you just forgot to apply it.
Please go back to the previous discussion and either implement all
requested changes or keep discussing them.
Thank you.
> +
> + marvell,nand-keep-config:
> + description: |
> + Orders the driver not to take the timings from the core and
> + leaving them completely untouched. Bootloader timings will then
> + be used.
> + $ref: /schemas/types.yaml#/definitions/flag
> +
> + marvell,nand-enable-arbiter:
> + description: |
> + To enable the arbiter, all boards blindly used it,
> + this bit was set by the bootloader for many boards and even if
> + it is marked reserved in several datasheets, it might be needed to set
> + it (otherwise it is harmless) so whether or not this property is set,
> + the bit is selected by the driver.
> + $ref: /schemas/types.yaml#/definitions/flag
> + deprecated: true
> +
> + unevaluatedProperties: false
This looks wrong. I do not see referencing schema here and I did not ask
to change it.
> +
> + required:
> + - reg
> + - nand-rb
> +
> +unevaluatedProperties: false
This one is ok.
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> +
> +allOf:
> + - $ref: nand-controller.yaml#
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: marvell,pxa3xx-nand-controller
> + then:
> + required:
> + - dmas
> + - dma-names
> + else:
> + properties:
> + dmas: false
> + dma-names: false
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: marvell,armada-8k-nand-controller
> + then:
> + required:
> + - marvell,system-controller
> + properties:
> + clocks:
> + minItems: 2
Also for clock-names "minItems: 2"
> + else:
> + properties:
> + marvell,system-controller: false
clocks:
maxItems: 1
and the same for clock-names... unless these variants also have two clocks?
Best regards,
Krzysztof