[PATCH v2 03/11] arm64: dts: ls1043a: use pcie aer/pme interrupts

From: Li Yang
Date: Wed Sep 14 2022 - 17:47:30 EST


After the binding has been updated to include more specific interrupt
definition, update the dts to use the more specific interrupt names.

Signed-off-by: Po Liu <po.liu@xxxxxxx>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx>
Signed-off-by: Li Yang <leoyang.li@xxxxxxx>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 3ba66b18de35..d04d4ac66d2a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -883,9 +883,9 @@ pcie1: pcie@3400000 {
reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
<0x40 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 118 0x4>, /* controller interrupt */
- <0 117 0x4>; /* PME interrupt */
- interrupt-names = "intr", "pme";
+ interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>,
+ <0 118 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pme", "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -909,9 +909,9 @@ pcie2: pcie@3500000 {
reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
<0x48 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 128 0x4>,
- <0 127 0x4>;
- interrupt-names = "intr", "pme";
+ interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>,
+ <0 128 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pme", "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -935,9 +935,9 @@ pcie3: pcie@3600000 {
reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
<0x50 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 162 0x4>,
- <0 161 0x4>;
- interrupt-names = "intr", "pme";
+ interrupts = <0 161 IRQ_TYPE_LEVEL_HIGH>,
+ <0 162 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pme", "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
--
2.37.1