[PATCH 2/6] phy: ti: gmii-sel: Add support for configuring CPSW5G ports in SGMII mode

[Siddharth Vadapalli]

CPSW5G ports on J7200 support SGMII mode. Add support to the phy-gmii-sel
driver to configure the CPSW5G ports in SGMII mode.

Signed-off-by: Siddharth Vadapalli <s-vadapalli@xxxxxx>
---
 drivers/phy/ti/phy-gmii-sel.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/ti/phy-gmii-sel.c b/drivers/phy/ti/phy-gmii-sel.c
index 0bcfd6d96b4d..f0b2ba7a9c96 100644
--- a/drivers/phy/ti/phy-gmii-sel.c
+++ b/drivers/phy/ti/phy-gmii-sel.c
@@ -23,6 +23,7 @@
 #define AM33XX_GMII_SEL_MODE_RGMII	2
 
 /* J72xx SoC specific definitions for the CONTROL port */
+#define J72XX_GMII_SEL_MODE_SGMII	3
 #define J72XX_GMII_SEL_MODE_QSGMII	4
 #define J72XX_GMII_SEL_MODE_QSGMII_SUB	6
 
@@ -105,6 +106,13 @@ static int phy_gmii_sel_mode(struct phy *phy, enum phy_mode mode, int submode)
 			gmii_sel_mode = J72XX_GMII_SEL_MODE_QSGMII_SUB;
 		break;
 
+	case PHY_INTERFACE_MODE_SGMII:
+		if (!(soc_data->extra_modes & BIT(PHY_INTERFACE_MODE_SGMII)))
+			goto unsupported;
+		else
+			gmii_sel_mode = J72XX_GMII_SEL_MODE_SGMII;
+		break;
+
 	default:
 		goto unsupported;
 	}
@@ -212,7 +220,7 @@ static const
 struct phy_gmii_sel_soc_data phy_gmii_sel_cpsw5g_soc_j7200 = {
 	.use_of_data = true,
 	.regfields = phy_gmii_sel_fields_am654,
-	.extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII),
+	.extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII) | BIT(PHY_INTERFACE_MODE_SGMII),
 };
 
 static const struct of_device_id phy_gmii_sel_id_table[] = {
-- 
2.25.1