Re: [linux][PATCH v9 2/2] dts: arm: at91: Add SAMA5D3-EDS Board

From: Claudiu.Beznea
Date: Wed Sep 14 2022 - 03:37:37 EST


On 13.09.2022 16:56, Krzysztof Kozlowski wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> On 13/09/2022 08:37, Claudiu.Beznea@xxxxxxxxxxxxx wrote:
>> On 09.09.2022 19:30, Jerry Ray wrote:
>>> The SAMA5D3-EDS board is an Ethernet Development Platform allowing for
>>> evaluating many Microchip ethernet switch and PHY products. Various
>>> daughter cards can connect via an RGMII connector or an RMII connector.
>>>
>>> The EDS board is not intended for stand-alone use and has no ethernet
>>> capabilities when no daughter board is connected. As such, this device
>>> tree is intended to be used with a DT overlay defining the add-on board.
>>> To better ensure consistency, some items are defined here as a form of
>>> documentation so that all add-on overlays will use the same terms.
>>>
>>> Link: https://www.microchip.com/en-us/development-tool/SAMA5D3-ETHERNET-DEVELOPMENT-SYSTEM
>>> Signed-off-by: Jerry Ray <jerry.ray@xxxxxxxxxxxxx>
>>> ---
>>> v8->v9:
>>> - Changed node name from gpio to gpio-inputs
>>
>> Why not gpio-keys as all other DTSes are doing? Anyway, I can change it
>> while applying.
>
> +1 even if these are not physical keys. If we ever run sed pattern, it
> would make life easier... :)

s/gpio-inputs/gpio-keys and applied to at91-dt, thanks!

>
>
> Best regards,
> Krzysztof